Pentagram P6121-L2 Manual de usuario
2007-06-20
Installation and User’s Manual
PENTAGRAM horNET
Wi-Fi PCI 11g (P6121-L2)
Wi-Fi USB 11g (P6122-09)
Wi-Fi PCMCIA 11g (P6123-09)
The latest versions of manual, drivers and applications are available on
www.pentagram.eu
NOTE! Any information and technical data are subject to change without prior notification
and/or indication in this manual.
© 2007 PENTAGRAM
All rights reserved; copying and reproduction is strictly forbidden.
horNET P6121-L2 / P6122-09 / P6123-09
3
INDEX
INTRODUCTION ................................................................................................. 5
PACKAGE CONTENTS................................................................................... 5
BEFORE YOU BEGIN..................................................................................... 5
DESIGNING YOUR WIRELESS NETWORK......................................................... 6
CARDBUS ADAPTER ..................................................................................... 6
PCI ADAPTER ................................................................................................ 6
USB ADAPTER............................................................................................... 7
INSTALL WIRELESS ADAPTER.......................................................................... 7
INSTALL DRIVER AND UTILITY ..................................................................... 7
INSTALL ADAPTER........................................................................................ 9
CONFIGURATION YOUR WIRELESS ADAPTER.......................................... 11
USING THE WIRELESS CLIENT CONFIGURATION UTILITY ............................ 12
NETWORK STATUS ..................................................................................... 12
SITE SURVEY .............................................................................................. 13
ADMIN.......................................................................................................... 14
PROFILE MANAGER .................................................................................... 15
TROUBLESHOOTING ....................................................................................... 18
SPECIFICATIONS ............................................................................................. 19
horNET P6121-L2 / P6122-09 / P6123-09
5
Introduction
The Wireless Network Adapter is a powerful 32-bit Cardbus/PCI/USB Adapter that installs
quickly and easily into PCs. The Adapter can be used in Ad-Hoc mode to connect directly with
other cards for peer-to-peer file sharing or in Infrastructure mode to connect with a wireless
access point or router for access to the Internet in your office or home network.
The Wireless Cardbus/PCI/USB Adapter connects you with 802.11g networks at up to an
incredible 54Mbps! And for added versatility, it can also interoperate with all the up to 11Mbps
802.11b products found in homes, businesses, and public wireless hotspots around the
country. And in either mode, your wireless communications are protected by industrial-
strength WPA, so your data stays secure.
This User Manual contains information on how to install and configure your Wireless Adapter
to get your network started accessing the Internet. It will guide you through the correct
configuration steps to get your device up and running.
Package Contents
1. Wireless network Cardbus/PCI/USB adapter
2. Manual, Drivers and Utility on CD
3. Quick Installation Guide
If any of the above items are missing, please contact your reseller.
Before you begin
You must have at least the following:
•A laptop computer/desktop PC with an available 32-bit Cardbus/PCI slot
•At least a 300MHz processor and 32MB of memory
•Windows 98SE, ME, 2000, XP
•A CD-ROM Drive
•Cardbus/PCI/USB controller properly installed and working in the laptop computer
•A 802.11g or 802.11b Access Point (for infrastructure Mode) or another 802.11g or
802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)
horNET P6121-L2 / P6122-09 / P6123-09
6
Designing Your Wireless Network
The wireless Cardbus/PCI/USB Adapter supports up to 54 Mbps connections. This card is fully
compliant with the specifications defined in IEEE802.11g standard. It is designed to
complement PCI Local Bus computers and supports Windows 98SE/Me/2000/XP.
Cardbus adapter
The two status LED indicators of the Cardbus wireless adapter are described in the following.
•PWR ON (Green): Indicates the Adapter is ready
•LNK/ACT ON (Green): Indicates a valid connection
•LNK/ACT Flashing: Indicates the Adapter is transmitting or receiving data.
PCI adapter
The status LED indicators of the PCI wireless adapter are described in the following.
•LNK/ACT ON (Green): Indicates a valid connection
•LNK/ACT Flashing: Indicates the Adapter is transmitting or receiving data.
horNET P6121-L2 / P6122-09 / P6123-09
7
USB adapter
The status LED indicators of the USB wireless adapter are described in the following.
•LNK/ACT ON (Green): Indicates a valid connection
•LNK/ACT Flashing: Indicates the Adapter is transmitting or receiving data.
Install Wireless Adapter
Install Driver and Utility
•Insert the Driver and Utility CD-ROM into the CD-ROM driver.
•The Wizard should run automatically, and Figure 2-1 should appear. If it dose not, click
the Start button and choose Run. In the field that appears, enter D:\autorun.exe (if ‘’D’’ is
the letter of your CD-ROM drive).
•Click Install Driver & Utility on the Wireless Client Configuration Utility screen.
horNET P6121-L2 / P6122-09 / P6123-09
8
•Follow the Install Shield Wizard steps, and click Finish when done.
•Now turn off your PC or notebook
horNET P6121-L2 / P6122-09 / P6123-09
9
Install Adapter
Cardbus Adapter
•Power on your PC, let the operating system boot up completely, and log in as needed.
•Hold the adapter with the LOGO facing up and insert it into a Cardbus slot.
•If the Found New Hardware Wizard displays, choose Install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
PCI Adapter
•Open your PC case and locate an available PCI on the motherboard.
•Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the
slot’s contacts. You may have to apply a bit of pressure to slide the adapter all the way in.
after the adapter is firmly in place, secure its fastening tab to your PC’s chassis with a
mounting screw. Then close your PC.
•Attach the external antenna to the adapter’s antenna port.
•Power on the PC.
horNET P6121-L2 / P6122-09 / P6123-09
10
If the Found New Hardware Wizard displays, choose Install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
USB Adapter
•Power on your PC, let the operating system boot up completely, and log in as needed.
•Hold the adapter and insert it into a USB slot.
•If the Found New Hardware Wizard displays, choose install the software automatically
(Recommended), and click Next button. The driver will be installed automatically.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Tarjeta de red de Pentagram
Manuales populares de Tarjeta de red de otras marcas
3Com
3Com EtherLink 3C509B Manual de usuario
TRENDnet
TRENDnet TEG-PCITX Manual de usuario
Cisco
Cisco MC16E Manual de usuario
Delta Electronics
Delta Electronics Braking Modules VFDB Series Manual de usuario
TwinMOS
TwinMOS Booming Manual de usuario
Dialogic
Dialogic Media Board DM/V1200BTEPEQ Manual de usuario
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manual de usuario
National Instruments
National Instruments NI 9234 Manual de usuario
Hama
Hama 49276 Manual de usuario
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manual de operación
Compaq
Compaq Wireless LAN 100 Manual de usuario
Bose
Bose PowerMatch Dante Manual de usuario