Peiker CEECOACH Manual de usuario
P 02 - 15 S 16 - 29 P 30 - 43
ceecoach - M - 06
Please contact your distributor for any questions and
warranty issues:
Purchased on:
At:
Use at your own risk!
Information regarding certication is provided on the
additional information sheet.
P 03
P 04
P 05
P 06
P 07 - 08
P 09
P 10
P 11
P 12
P 13
P 14 - 15
Table of contents
Explanation of symbols
Illustrated device overview
Before getting started
Assigning roles (pairing)
Possible connection modes
Key Lock, Mute Moderator
Connecting to a smartphone (pairing)
Function tables (short overview), range,
setting the volume & resetting
Technical features and update function
Information on usage, protection,
radio communication
Battery maintenance, disposal &
currentness
2
Explanation of symbols
If applicable, please observe the instructions of
the separately delivered headset. You can also
make use of your own headset.
*
Scope of delivery
see package
The light ring around the Talk button (o) indicates the
operating modes. The ring can be illuminated in various
colors (green, blue, red, yellow, white and purple),
continuously and ashing.
Examples:
Fast
ashing
Continuous
light
Light
off
Slow
ashing
Con guration for headsets
Please make sure that CEECOACH con guration is
correct for your headsets. You can check and change
that in the installer. Please take note of the guide for
the installer on our homepage. When using mono
headsets (e.g. Jabra wave) on CEECOACH with stereo
con guration (delivery standard since Dec 2016)
you might experience echoes. When using stereo
headsets (e.g. Jabra Chill) on CEECOACH with mono
con guration you will only have audio on one ear.
3
Device overview
Rotating clip
mount snaps
in at a
90° angle
Plus key (+)
Headset-
connection
(3.5 mm jack)
Headset
Micro-USB
cable
Talk button (o)
Light ring
Micro-USB-
connection
Minus key (-)
4
Depending on the status of the battery, the device is fully charged in max. 4 hours, once the continuous yellow light
has switched to green. For charging: Plug the included charging cable into the micro-USB connection and connect it
to the included power supply or a computer.
Connect the micro-
USB charging cable
Charge
Green permanent
light = Device is fully
charged
Unplug micro-USB
cable
1.
2.
3.
4.
Before getting started
Connect
headset
Switch on
(white light = role
assignment has
to be performed)
Switch off. (Light
ring brie y lights
up in red)
5.
6.
7.
All CEECOACH functions are only available after removing the USB plug!
> 3sec. = off
max. 4hours
Audio cue when
switching on:
"Battery good /
battery low"
5
The devices have not been assigned roles upon delivery (all devices are identical). This is done when the devices are
switched on for the rst time. If you wish to switch on the devices without changing the prede ned role assignments,
press the Talk button (o) for one second. Role assignment only needs to be performed once when switched on for
the rst time. If you would like to change the role of a device, you can repeat the process at any time (following
a reset). If you would like to increase the number of participants, the connected devices have to be reset rst.
2 sec. (o) & (-) Ready for use
after approx. 30 sec., indicated by
slow ashing .
2 sec. (o) & (+) Ready for use and/or maximum
number of participants found, after
approx. 30 sec., when ashing slowly.
.
Role assignment (pairing)
Assigning the moderator
Assigning participants
To assign the role of the participant to the device, switch on and press the Minus button (-) and the Talk button (o)
simultaneously for 2 seconds.
To do so, after switching on the prospective moderator, please press the Plus button (+) and the Talk button (o)
simultaneously for 2 seconds.
6
Connection modes: 1st Moderator Mode
Moderator
Participant
The moderator speaks – up to 5 participants listen. This connection is already established after role assignment, without
the moderator having to press the Talk button (o).
7
Connection modes: 2nd Participant Mode
Moderator
Participant
The moderator can switch an active conversation to
private mode, i.e. the moderator speaks to one participant
privately. The remaining participants are unable to
listen in. To do so, the moderator presses the Talk
button (o) once. If the moderator would like to end
the private mode, he/she briefly presses the Talk
button (o) twice.
Connection modes: 3rd Private Mode
Moderator
Participant
Participant and moderator can speak to one another;
all other participants can only eavesdrop. Voice
communication with the moderator is established when
the participant brie y presses the Talk button (o) 1 time.
The conversation is stopped by the moderator by double
clicking the Talk button (o).
8
In participant mode as well as private mode, the
individual conversation can only be interrupted
after 10 seconds. By pressing the Talk button (o),
another participant may speak and the other
participants can listen (see participant mode).
Connection modes: 3rd Private Mode
Mute Moderator
As a Moderator you can mute yourself independent
from the current connection mode. The continuous
transmission can be interrupted by doing a long press
on the minus (-) or the plus (+) button or the mic button
until the audio signal “mute on” is heard.
While the moderator is muted a reminder signal rings
out regularly if a participant tries to establish a con-
nection with the moderator.
By pressing the minus (-) or plus (+) button you get back to
the previous connection mode.
From software version 01.40 a keylock function is
available.
By pressing the (o) button three times
(short press) it is activated or deactivated.
Key Lock
If keylock is active LED light blinks purple.
9
To connect the device to a smart phone, press the Plus button (+) and the Minus button (-) simultaneously. CEECOACH
will now emit a continuous yellow light. Activate Bluetooth® on your smartphone and scan for Bluetooth devices.
The device is shown on the mobile phone as CEECOACH incl. the last 4 characters of the serial number, which can be found
on the back side of the device. Click or tap the device to establish a connection.
An incoming call is announced by CEECOACH and accepted by pressing the Talk button (o) once. Double clicking the Talk
button (o) terminates the call. Pressing the Talk button (o) again puts the device back into participant mode. If you do not
wish to accept a call, click the Talk button (o) twice - and the participant mode will be retained.
CEECOACH
Made in Germany
CEECOACH
XXXXXXX
SN: XXXXX 2D53
XXXXXXXX
2D53
3. Turn CEECOACH
device
CEECOACH
4. Select CEECOACH
device
Connecting to a smartphone (pairing)
1. Press until
yellow continuous
light appears
2. Activate Buetooth®
on the smartphone
10
Tabla de contenidos
