
2 of 5 ISSUED: 07-26-05 SHEET #: 024-9009-2 12-01-06
Note: Read entire instruction sheet before you start installation and assembly.
Tools Needed for Assembly
•studfinder("edgetoedge"studfinderisrecommended)
•phillipsscrewdriver
•drill with 1/2" drill bit
Forcustomercarecall(800)729-0307or(708)865-8870.
• Donotbegin to install your Peerless product until you have read and understood the instructions and warnings
containedinthis Installation Sheet. If you have any questions regarding any of the instructionsorwarnings,please
callPeerless customer care at1-800-729-0307.
• Thisproduct should only be installed by aqualifiedprofessional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardwareandcomponents.
• Neverexceedthe Maximum Load Capacity of 80 lb (36.3kg).
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screwsfirmly, but donotovertighten. Overtightening can damagetheitems, greatly reducing their holding
power.
WARNING