PEERLESS LDM233K Guía

ISSUED: 09-11-91 SHEET #: 124-9004/D12-27-99

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

1 of 2

LDM233K LDM233 LDM312

Part # Part # Part # QTY. Description

A1235-375K 1235-375 1235-371 1 upper tray

B120-0017 120-0014 120-0016 1 lower tray

C500-9006 500-9006 500-9006 4 #10 3/4" phillips screw

D506-9058 506-9058 506-9058 4 #6 5/8" phillips screw

E540-9400 540-9400 540-9400 8 small flat washer

FN/A 505-9010 505-9010 1 M5 - .8 x 10mm penta-pin

G3022-502 N/A N/A 1 lock plug

H0000-322 N/A N/A 1 lock key

J590-1004 590-1004 590-1004 4 adhesive stud

K530-9334 530-9334 530-9334 4 nylon nut

L540-9401 540-9401 540-9401 4 1/4" flat washer

N/A 520-9249 520-9249 1 penta-pin tool (not shown)

Models:

LDM233K

LDM233

LDM312

Installation and Assembly - VCR Mounting Tray

IMPORTANT!

Read entire instruction sheet before you

start assembly and installation.

Before you start make sure all parts listed below

are included with your product.

Parts List

Some parts may appear slightly different than illustrated.

Drill four 1/8" dia. x 1" deep holes in mounting surface

using the lower tray (B) as a template. Attach lower tray

(B)tomounting surface with four #10 phillips screws(C)

andwashers(E)asshown.

AlternativeInstallation: Peel off paper to expose adhesive

tape on bottom of lower tray (B) and attach to mounting

surface.

ISSUED: 09-11-91 SHEET #: 124-9004/D12/27/99

Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.

2 of 2

3.13.1

3.1

3.23.2

3.2

Flip VCR upside down and remove the four outermost screws that attach bottom pan to VCR. Note: Do not remove pan when

removing the screws! Position upper tray (A) so that the holes on tray align with holes on VCR. Attach tray to VCR using four #6

phillips screws (D) and washers (E).

Alternative Installation: Flip VCR upside down and sec-urely attach four adhesive studs (J) to corners of VCR as shown. Before

adhering studs to VCR be sure each stud will penetrate a hole in the random perforated hole pattern on upper tray (A)!

Place upper tray (A) on VCR as shown. Attach studs to tray using four nylon nuts (K) and 1/4" washers (L). Hand tighten nylon

nuts!

(VCR has been omitted from illustration for clarity.)

Slide upper tray (A)with mounted VCR onto lower tray

(B)ashown.

Model 233 & 312 - Insert M5 penta-pin screw (F) using

penta-pin tool into upper tray (A) as shown.

Model 233K - Install lock plug (G) and lock key (H)

into upper tray (A) as shown.

Note: Use lock key (H) to turn

(clockwise) the lock plug (G) in lock

barrel. Securely tighten - key must

be in horizontal position to be

removed.

Peerless is a trademark of Peerless Industries, Inc.

Este manual sirve para los siguientes modelos

Otros manuales de Rack y soporte de PEERLESS

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario