Pecron P500 Manual de usuario
https://www.pecron.com
User manual for outdoor power station P500/P600
PORTABLE POWER STATION
Contents
1. Introduction
2. Technical Specifications
3. Function Instruction
4. Using Guideline
5. Warranty
PORTABLE POWER STATIONPORTABLE POWER STATIONPORTABLE POWER STATION
1. Introduction
Thank you for purchasing Pecron P500/P600 outdoor portable power station.
P500/P600 is a portable multiple-use battery-powered/solar generator. It features
light weight, large capacity, and full capability. It provides you with easy access
to power when you are off-the-grid. P500/P600 can be widely used in the field of
mobile working, outdoor recreation, camping, rescuing, environment protection,
emergency communication, power outage backup and so on.
P500/P600 Outdoor Portable Power Station Highlights:
110V/60Hz Pure Sine Wave AC output
DC12V10A output
USB QC3.0*2 (5V3A 9V2.5A) AC output
USB-C*2 (5~9V3A 12V2.25A) AC output
LED Emergency Lighting
Three-Way Charging
Built-In MPPT Charge Controller
Please read the user manual carefully before using, and keep the purchase
receipt as a proof of purchase for any warranty claim.
1
PORTABLE POWER STATION
2. Technical Specifications
Model No.
P500
P600
Rated power
500W
600W
Peak power
1000W
1200W
Output voltage
AC 220V/50Hz Pure Sine Wave
DC12-14V10A
USB QC3.0*2 (5V3A 9V2.5A)
USB-C*2 (5~9V3A 12V2.25A)
Battery capacity
388.5Wh(25.9V15Ah)
578Wh(25.2V22.95Ah)
Battery type
Lithium ion
Charging time
3~4h
2~3h
Charging voltage
29.4V 5A DC29.4V 9A(MAX)
Car and solar
charging
DC12V cigarette lighter / 18V solar panel (open circuit
voltage is 22V and the maximum input is 100W)
Protection
Over-Voltage, Low-Voltage, Over-Temperature
Over-Load, Short-Circuit
Working
temperature
0℃~45℃for (charging)
-20℃~ 45℃for (discharging)
LED light
LED 2W
Product size
L280*W152*H225mm
Net weight
10.8lbs(4.9Kg)13lbs(5.9Kg)
2
PORTABLE POWER STATION
3. Function Instruction
Please read the instruction of functions carefully before using to avoid
damage to the unit and it's connected devices.
Packing List
.Charging Adapter
.Charging Cable
.Accessory Bag
.User Manual
3.1 Functions Of Each Part
2
34 5
1
3
PORTABLE POWER STATION
Parts Functions
1
LCD display (shown as Figure 4, Page 7)
2
DC Output Switch: Press and hold the DC switch for a while, the USB
ports and DC12V socket will be activated, at the same time, the LCD screen
shows the battery level, estimated discharging time(h), discharge(load)
wattages(shown as Figure1, Page5). Press the DC switch will show the
discharging voltage;
Press and hold the DC switch for a while to deactivate the USB ports and
the DC 12V socket
3
AC Output Switch: Press and hold the AC switch for a while to activate the
AC output, at the same time, the LCD screen shows the battery level, loading
percentage, estimated discharging time(h), discharge(load) wattages(shown
as Figure2, Page5). Press the AC switch will show the discharging voltage
and PF value(shown as Figure3, Page5).
Press and hold for a while to deactivate the AC outputs.
3.1
Reset: In case of crash or abnormal display, press and hold the AC
switch button for 14 seconds to reset.
4
USB QC3.0 Ports: Support 5V / 9V fast charging.5V for maximum 3A or 9V
for maximum 2.25A. With overload and short circuit protection.
USB-C Ports: Support 5V / 9V / 12V fast charging. 5V/9V for maximum
3A, or 12V for maximum 2.25A. With overload and short circuit protection.
5
DC 12V Socket: Support 12 ~ 14V DC output with the maximum
output current 10A. With overload and short circuit protection.
4
PORTABLE POWER STATION
DC DISPLAY SCREEN
FIGURE 1
AC DISPLAY SCREEN - 1
FIGURE 2
AC DISPLAY SCREEN -2
FIGURE 3
5
PORTABLE POWER STATION
Parts Functions
6
DC5521 Input: Supports wide voltage 12V/18V car
charging and solar charging(MPPT charge controller),
with the maximum input 100 watts.
7
DC GX16-4 Input(1, 2 are positive; 3, 4 are negative):
Support 16mm four-pin aviation plug for DC charging
(29.4V 9A max)
8
AC Output Socket: when the unit is on, it can produce
110V AC output.
9
AC Output Socket: when the unit is on, it can produce
110V AC output.
6 7 8 9
6
PORTABLE POWER STATION
3.2 LCD Intelligence Display
Figure 4 (Intelligence Display)
DC output: When the DC output is turned on, the LCD screen will display "DC OUT", and
the USB ports, 12V DC Socket works.
AC output level: It shows the current loading percentage of the maximum AC output,
100% is fully loaded.
AC output: When the AC output is turned on, the screen will display “AC OUT”, and it will
be able to produce 110V AC output.
Battery level: It shows the remaining battery, each grid represents 20% of the total battery
capacity; and it will flash in a marquee style during charging, and stop flashing when it's
fully charged; The battery icon starts flashing when the unit has less than 10% battery,
please charge the power station immediately.
Battery percentage/battery voltage: The power station will reserve some power to protect
itself from over-discharging even the battery level drop to 0%; When the power station is
loaded with high power consumption devices, the low-voltage alarm will be displayed when
the battery level drop to 10%-20%, please charge the power station immediately.
DC output
Charge
Discharge
Time
Battery level
AC output Level
AC output
Battery percentage(%)/
Battery voltage(V)
Temperature Alarm
Charge/discharge power(Net Value)
AC output Wattage(W)/Voltage(V)
AC overload alarm
PF value/charge and discharge time
7
PORTABLE POWER STATION
Temperature alarm: When the temperature is too high, the power station will shut down all
output and you will hear five "di" tone; The power station will resume to work when the
temperature falls within its working range.
Charge: When the power station is charging(AC/DC), the LCD intelligence screen will
display .
Discharge: The LCD intelligence screen will display icon to indicate that there is DC
output.
Charge/discharge power: The screen will display the net value of the input and output when
the power station is being charged and discharged at the same time.
AC output wattage/voltage: When the AC output is on, the loaded wattage (W) and voltage
(V) levels of the power station will be displayed.
AC overload alarm: When the total AC output exceeds the rated power(500W/600W),
"Over Load" small icon flashes, and you will hear two "beep" tone, the power station will
shut down all AC outputs.
PF value/charge and discharge time: PF(Power Factor) expresses the ratio of the real
power absorbed by the load to the apparent power flowing in the circuit; The power station
displays the PF value and calculates the remaining working/charging time (in hours)
according to the input and/or output power.
!
8
PORTABLE POWER STATION
Otros manuales para P500
1
Tabla de contenidos
Otros manuales de Cargador de baterías de Pecron
