Pecron EB3000-24V Manual de usuario
Please read the user manual thoroughly before using
USER MANUAL
EB3000-24V
EB3000-24V 3072Wh
FUNCTION INTRODUCTION
①
②
③
LED Capacity Indicator
Indicator Under Cascade Status
Battery Expansion Port
④
⑤
⑥
Power Display Switch
DC12V XT60 Output
USB-C Ports
⑦
⑧
⑨
USB-A Ports
DC Button
DC 12V~95V Charging Port
⑤
⑧
⑨
⑥
⑦
④
①
②
③
SPECIFICATIONS
LiFePO4 Battery
Retain 80%+
Original Capacity
At 3500 Cycles
Dimension
L17.3*W12.2*H7.8 in
L441*W312*H200
mm
Capacity Battery Type Net Weight
Around 57lb
Around 26kg
3072Wh
(25.6V120Ah)
Protections
Over-Voltage,
Overheat,
Overload,
Short-Circuit,
Self-Recovery
Temperature
0℃~45℃/32°F~113°F
(Charging)
-20℃~45℃/-4°F~113°F
(Discharging)
EB3000-24V3072Wh
OUTPUT SPECS INPUT SPECS
XT60 Output*1 USB-A*1
(5V,9V,12V,20V,
Max 100W)*1
USB-C*1
(5V,9V,12V,
Max 18W)*1
DC 12V-30A
GX16MF-5*1
DC Charging(12V~95V)
Max 400W
CASCADE FUNCTION
It can be connected
with devices that come
with DC 24V cascade port.
Port For Cascade *2
HOW TO USE THE EB3000-24V
Light press to show battery capacity
Long press to turn on/off DC (USB/XT60 12V)
PACKING LIST
Note: Operating temperature range of EB3000-24V is -20~45℃.
If the operating temperature is not within this range, it will fail to work.
MC4 Solar
Charging
Cable
(LSMC4-5GX16) *1
pecron EB3000-24V *1 M25 Cascade cable *1
Cable from XT60 to
Cigar port and 5525 port *1
EB3000-24V 3072Wh
Car charge cable with
GX16MF-5 connector *1 12V Alligator Clips *1
Anderson Solar Charging Cable *1
Solar Cable with
5521 Connector *1
HOW TO CONNECT EB3000-24V WITH E2000 LFP IN CASCADE
1：First confirm battery volume for both EB3000-24V and E2000 LFP and ensure their volume difference is no more
than 10%. If the difference is too large, it wil take longer time for cascading successfully.
2：Connect the E2000LFP with the port "1" on EB3000-24V with
a 24V cascade connecting cable. (If you want to connect two
external battery pack, you can connect the port "2" on the
first battery pack to the port "1" on the second battery pack）
as shown on the right:
3：After the connection is completed, When the indicator shows
red, it means that the power discrepancy is too large, and the
battery is being balanced at this time (reducing the battery
difference between E2000 LFP and extra battery pack before
cascading can reduce the equalization time).
When the display light is green, it means that the cascade is
successful and can be used normally.
4：Adjust E2000 LFP according to the number of connected EB3000-24V battery packs.(If you don’t adjust accordingly ,
the battery showed on the power station is inaccurate. At this time, the power volume of extra battery pack can be taken
as a sum battery volume of the power station and extra battery pack.)
HOW TO USE THE CASCADE CABLE
Insert the cascading cable: the side with the arrow
is facing up, push it inwards according to the hole,
and insert it in place when you hear a "click".
Pull out the cascading cable: hold the protrusions
on both sides and turn to the left, then pull out at
the same time.
HOW TO CALIBRATE THE POWER LEVEL OF THE E2000 LFP AFTER CASCADING
Solution 1 (some machines do not support Solution 1, please use Solution 2)
1: Press and hold DC for seven seconds in the off state
to enter the setting item.
2: Under a number-001, you will see the number of the
extra battery packs,which is 0 by default. It can be
set according to the number of connected battery
packages - shortly press DC to increase the number
and shortly press AC to decrease the number.
3: Long press AC to enter the process 002, the default
value is L3, this means screen brightness. Shortly
press DC can increase the brightness or shortly press
AC to decrease the brightness.
4: Long press AC to enter the setting of item 003. The
default value is OFF, which means the automatic
shutdown time of the machine without any load.
Shortly press DC can increase the time or shortly
press AC to decrease the time.
2: Setting-001 can be seen at this time, the default
value is 10 (this is for voltage calibration, do not
modify it)
1: Turn on the power station, screen will light. Then
press the DC and AC buttons at the same time, the
battery frame will flash. Then quickly double-click
AC button to enter the setting.
Solution 2
5: Long press AC to enter the setting of item 004, the
default value is 60Hz. This is the AC output frequency,
do not modify it.
6: Long press AC to exit the setting. You will see a word
of SUC if the setting is successful.
3: Long press AC to enter 002 (This is for 0-current
calibration, do not modify it)
4: Long press AC to enter 003, the default value is 10
(this is for current calibration, do not modify it)
5: Long press AC to enter 004, the default value is
1920Wh. You can modify it to the battery volume
after connecting with extra battery packs. Shortly
press DC to change the flashing number and short
press AC to switch the battery volume.
A power pack is 4992Wh;
The two power packs are 8064Wh.
6: Long press AC to enter 005, the default value is L3,
this means screen brightness. Shortly press DC can
increase the brightness or shortly press AC to
decrease the brightness.
Setting the battery volume when you
only connect one extra battery pack
Setting the battery volume when
you connect two battery packs.
7: Long press AC to enter the setting of item 006, the
default value is OFF, which means the automatic
shutdown time of the machine without any load.
Shortly press DC can increase the time or shortly
press AC to decrease the time.
8: Long press AC to enter 007, the default value is 22.0
(the number is for low voltage protection, do not
modify it)
9: Long press AC to exit the setting. You will see a word
of EEP if the setting is successful.
1：Protection may be triggered while you are using high power (higher than 1500W) for a long time under high
temperature. In order to meet your needs, please replace with a high-current fuse.
2：After cascading of the power station and the battery pack is completed and the capacity of the power station is
adjusted, please fully charge it to complete the battery calibration.
CONSIDERATIONS DURING CASCADING PROCESS
HOW TO CHARGE THE EB3000-24V BATTERY PACK BY VEHICL
Car charge cable with GX16MF-5 connector
SOLAR CHARGE TIME
MC4 Solar
Charging Cable
pecron 200W
Note: The above data comes from Pecron＇s laboratory. Actual charging time depends on
the weather conditions.
200W(×1)
19~20 Hours
Recommended
400W(×2)
10~11 Hours
Recommended
USING SOLAR PANELS TO CHARGE THE EB3000-24V
GX16MF-5 Charging Port: PV(operating voltage) range 12V~95V, 400W maximum; VOC(open circuit voltage) of solar
panel/array must be less than 95V, otherwise, it will damage the unit! Do not wire more than two 36V(AKA 24V) solar
panels in series.(18V~36V stands for Vmp, the operating voltage, of the solar panel)
GX16MF-5 Charging Port:
PV12~95V-400W Maximum Input
Otros manuales para EB3000-24V
1
Tabla de contenidos
Otros manuales de Cargador de baterías de Pecron
