PeakTech 5150 Manual de usuario

Bedienungsanleitung /

Operation manual /

Manual de instrucciones /

Istruzioni per l'uso /

Mode d’emploi /

Differenz-Druckmessgerät /

Differential Pressure Meter /

Manómetro diferencial /

manometro differenziale /

Manom tre différentiel

PeakTech

5150

1. Safety Precautions

This product complies with the requirements of the following European Community Directives:

2004/108/EC (Electromagnetic Compatibility).

To ensure safe operation of the equipment and eliminate the danger of serious injury due to short-

circuits (arcing), the following safety precautions must be observed.

Damages resulting from failure to observe these safety precautions are exempt from any legal

claims whatever.

* Do not use this instrument near high-energy circuits.

* Do not operate the equipment near strong magnetic fields (motors, transformers etc.).

* Do not place the equipment on damp or wet surfaces.

* Do not place water-filled containers on the equipment (danger of short-circuit in case of

knockover of the container)

* Do not operate the meter before the cabinet has been fully closed.

* Comply with the warning labels and other info on the equipment.

* The measurement instrument is not to be to operated unattended.

* Always start with the highest measuring range when measuring unknown values.

* Do not subject the equipment to direct sunlight or extreme temperatures, humidity or

dampness.

* Do not subject the equipment to shocks or strong vibrations.

* Keep hot soldering irons or guns away from the equipment.

* Allow the equipment to stabilize at room temperature before taking up measurement (important

for exact measurements).

* Replace the battery as soon as the battery indicator appears. With a low battery, the meter

might produce false reading.

* Fetch out the battery when the meter will not be used for long period.

* Periodically wipe the cabinet with a damp cloth and mid detergent. Do not use abrasives or

solvents.

* The meter is suitable for indoor use only

* Do not store the meter in a place of explosive, inflammable substances.

* Do not modify the equipment in any way

* Do not place the equipment face-down on any table or work bench to prevent damaging the

controls at the front.

* Opening the equipment and service – and repair work must only be performed by qualified

service personnel

* Measuring instruments don’t belong to children hands.

1.1 Cleaning the cabinet

Clean only with a damp, soft cloth and a commercially available mild household cleanser. Ensure

that no water gets inside the equipment to prevent possible shorts and damage to the equipment.

-10-

2. Features

1. Large LCD display with backlight.

2. Relative time clock on MAX MIN and AVG provides a time reference for measurement.

3. Zero and differential function for pressure measurement.

4. USB interface, for data connection to a PC.

5. Low battery indication, and Auto Power Off mode (Sleep mode) increases battery life.

-11-

3. Front Panel Description

-12-

1. pressure input (+)

2. differential pressure (-)

3. LCD-display

4. Press the “UNITS-button” to change the measurement unit.

5. Press the „

☼

-button” to turn on the backlight. Press it again to turn off the backlight.

6. Press the “DIF-button” during a measurement to start a differential pressure

measurement between the following measurement value and the value while pressing

the “DIF-key”.

7. Press the “REC-button” to step through the maximum, minimum, and average readings.

To exit the MAX/MIN/AVG mode, press the “REC-button” for 2 seconds to return to

normal operation.

8. battery cover

9. Press the “ON/OFF-button” to turn the thermometer on or off.

10. Press the “HOLD-button” to freeze or unfreeze the displayed readings. Press the “HOLD-

button” and hold 2 seconds to zero out the display.

-13-

4. Display Elements

1. Hold Function

2. Differential Mode

3. Primary Data screen

4. Record Mode

5. MAX/MIN/AVG

6. Low Battery indicator

7. Pressure Unit indicator

8. Relative Time Clock

9. Data output from USB

-14-

5. Auto Power Off Mode

The meter enters sleep mode (default). That is to say, the meter will automatically shut off after

20 minutes if no button press occurs for 20 minutes.

6. Operation

6.1. Measuring Pressure

The Primary Display number is Pressure value, the device measures Gauge/Differential Pressure, it

features 11 selectable units of measure: PSI, mbar, hPa, inH2O, mmHg, ozin

, ftH

O, cmH

kgcm

, bar

1. Press the “UNITS-button” to enter the pressure mode and press the “UNITS-button” to select

unit.

2. Connect a single hose to the "Input (+)" port, leaving the "Ref (-)" port unconnected.

MAX

MIN

P/V/F

3. With the tubing open to ambient conditions press the “HOLD-button” and hold for 2 seconds to

zero out the display.

4. Place the input hose in a different zone than the Meter.

5. The Meter displays the differential pressure of the input zone with respect to the reference

zone. -15-

For instance, a positive reading means that the input zone is positively pressured with respect

to the Meter location or its reference zone.

6.2. Holding the Displayed Readings

1. Press the “HOLD-button” to freeze the readings on the display .The display shows HOLD.

2. Press the “HOLD-button” again to turn off the HOLD function

6.3. Viewing the MIN, MAX, and AVG Readings

1. Press the “REC-button” to step through the maximum (MAX), minimum (MIN), or the average

(AVG) readings. The elapsed time since entering MAX/MIN/AVG mode, or the time at which the

minimum or maximum occurred appears on the display.

2. Press the “REC-button” for 2 seconds to exit MAX/MIN/AVG mode.

7. Specifications

7.1. General Specifications

Operating Conditions 0 to 50°C; <80% RH

Storage Conditions -10 to 60°C; <80% RH

Power Supply 9V Battery

Low Battery Indicator Yes

Dimensions (WxHxD) 75x203x50mm

Accessories black and white hose, USB-cable, software for windows

2k/XP/VISTA/7, battery and operation manual

-16-

7.2. Manometer specification

Accuracy ±0.3% FSO (25°C)

Repeatability ±0.5% FSO

Linearity/Hysteresis ±0.29% FSO

Pressure Range

5 psi

Maximum Pressure 20psi

Response Time 0.5 Seconds typical

Over range Indicator

Err. 1

Under range Indicator

Err. 2

Units Range Resolution

PSI 5.000 0.001

Mbar 344,7 0.1

inH2O 138,3 0.1

mmHg 258,5 0.1

kPa 34,47 0,01

in Hg 1,018 0,001

Ozin

80,00 0,01

ftH

O 11,53 0,01

cmH

O 351,5 0,1

kgcm

0,351 0,001

Bar 0,344 0,001

1psi*27.68=inH2O

1psi*68.947=mbar

1psi*703.072=1*mmH2O

1psi*6894.6=Pa

FSO: Full Scale Output (The difference signal between zero and end point of range)

-17-

8. Error Codes

An error message will appear on the display if the meter fails an internal diagnostic test. And it will

freeze all the buttons.

Err. 1: Pressure value is over the range.

Err 2.: Pressure value is below the range.

Err 3.: DIF function, the differential pressure value is over range.

Err 4.: DIF function, the differential pressure value is below range.

9. Replacing the Battery

When the entire display shows the low battery indication, the 9 V battery has fallen to a critically low

voltage level and should be replaced as soon as possible.

1. Take off the battery cover at the button side of the instrument,

2. Remove the old battery and replace the new 9 V battery.

3. Make sure that the battery is installed to the right position and connected to the proper

polarisation with the battery snap.

4. Put on the battery cover and let it snap in to secure.

-18-

Otros manuales para 5150

Tabla de contenidos

Otros manuales de Instrumento de medición de PeakTech

PeakTech

PeakTech 5170 Manual de usuario

PeakTech

PeakTech 5175 Manual de usuario

PeakTech

PeakTech 2675 Manual de usuario

PeakTech

PeakTech 2800A Manual de usuario

PeakTech

PeakTech 9020 Manual de usuario

PeakTech

PeakTech 1010 Manual de usuario

PeakTech

PeakTech 3430 Manual de usuario

PeakTech

PeakTech 1640 Manual de usuario

PeakTech

PeakTech 5065 Manual de usuario

PeakTech

PeakTech 9015 Manual de usuario

PeakTech

PeakTech 5175 Manual de usuario

PeakTech

PeakTech 5306 Manual de usuario

PeakTech

PeakTech 3435 Manual de usuario

PeakTech

PeakTech 9017 Manual de usuario

PeakTech

PeakTech 1125 Manual de usuario

PeakTech

PeakTech 1040 Manual de usuario

PeakTech

PeakTech 5201 Manual de usuario

PeakTech

PeakTech 2275 Manual de usuario

PeakTech

PeakTech 1655 Manual de usuario

PeakTech

PeakTech 5039 Manual de usuario

PeakTech

PeakTech 3270 Manual de usuario

PeakTech

PeakTech 5200 Manual de usuario

PeakTech

PeakTech 5145 Manual de usuario

PeakTech

PeakTech 5201 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario