Peak PCAN-PCI Express Manual de usuario

PCAN-PCI Express

CAN Interface for PCI Express

User Manual

Document version 3.4.0 (2015-06-09)

PCAN-PCI Express – User Manual

Products taken into account

Product Name Model Part Number Ser. No.

PCAN-PCI Express Single

Channel galv. isolated

One CAN channel IPEH-003026

PCAN-PCI Express Dual

Channel galv. Isolated

Two CAN channels IPEH-003027

starting at

01000

PCAN-PCI Express Four

Channel galv. isolated

Four CAN channels IPEH-003040

The cover picture shows the product PCAN-PCI Express Four Channel galvanic

isolated. Other product versions have an identical form factor but vary in equipment.

CANopen® and CiA® are registered community trade marks of CAN in Automation

e.v.

All other product names mentioned in this manual may be the trademarks or

registered trademarks of their respective companies. They are not explicitly marked

by “™” and “®”.

Duplication (copying, printing, or other forms) and the electronic distribution of this

document is only allowed with explicit permission of PEAK-System Technik GmbH.

PEAK-System Technik GmbH reserves the right to change technical data without

prior announcement. The general business conditions and the regulations of the

license agreement apply. All rights are reserved.

PEAK-System Technik GmbH

Otto-Roehm-Strasse 69

64293 Darmstadt

Germany

Phone: +49 (0)6151 8173-20

Fax: +49 (0)6151 8173-29

www.peak-system.com

info@peak-system.com

Document version 3.4.0 (2015-06-09)

PCAN-PCI Express – User Manual

Contents

1Introduction 5

1.1 Properties at a Glance 5

1.2 System Requirements 6

1.3 Scope of Supply 6

2Installing the Software and the Card 7

3Connecting the CAN Bus 10

3.1 D-Sub connector 10

3.1.1 Slot Bracket with D-Sub Connectors 12

3.2 Supplying External Devices via the CAN

Connector 13

3.3 Cabling 15

3.3.1 Termination 15

3.3.2 Example of a Connection 15

3.3.3 Maximum Bus Length 16

4Software and API 17

4.1 Monitor Software PCAN-View 17

4.1.1 Receive/Transmit Tab 20

4.1.2 Trace Tab 22

4.1.3 PCAN-PCI Express Tab 23

4.1.4 Status Bar 23

4.2 Linking Own Programs with PCAN-Basic 24

4.2.1 Features of PCAN-Basic 25

4.2.2 Principle Description of the API 26

4.2.3 Notes about the License 27

5Technical Specifications 28

Appendix A CE Certificate 30

PCAN-PCI Express – User Manual

Appendix B Dimension Drawing 31

Appendix C Quick Reference 32

PCAN-PCI Express – User Manual

1Introduction

The PCAN-PCI Express card enables the connection of a PC with

PCI Express slots to CAN networks. There is galvanic isolation of up

to 500 Volts between the computer and CAN sides. The card is

available as a single, dual, or four-channel version. Device drivers

and programming interfaces exist for different operating systems,

so programs can easily access a connected CAN bus.

Tip: At the end of this manual (Appendix C) you can find a

Quick Reference with brief information about the installation

and operation of the PCAN-PCI Express card.

1.1 Properties at a Glance

PC plug-in card (PCIe-x1) for PCI Express slots

1, 2 or 4 High-speed CAN channels (ISO 11898-2)

Bit rates from 5 kbit/s up to 1 Mbit/s

Compliant CAN specifications 2.0A (11-bit ID)

and 2.0B (29-bit ID)

CAN bus connection via D-Sub,

9-pin (in accordance with CiA® 102)

FPGA implementation of the CAN controller

(SJA1000 compatible)

NXP PCA82C251 CAN transceiver

Galvanic isolation on the CAN connection up to 500 V, separate

for each CAN channel

5-Volt supply to the CAN connection can be connected through a

solder jumper, e.g. for external bus converter

PCAN-PCI Express – User Manual

Extended operating temperature range from -40 to 85 °C

(-40 to 185 °F)

Note: This manual describes the use of the PCAN-PCI Express

card with Windows. You can find device drivers for Linux and

the corresponding application information on the provided DVD

in the directory branch Develop and on our website under

www.peak-system.com/linux.

1.2 System Requirements

A vacant PCI Express slot in the computer

Operating system Windows 8.1, 7, Vista (32/64-bit)

or Linux (32/64-bit)

1.3 Scope of Supply

PCAN-PCI Express card

Slot bracket with D-Sub connectors for the CAN bus

(only four-channel version)

Device drivers for Windows 8.1, 7, Vista and Linux (32/64-bit)

PCAN-View CAN monitor for Windows 8.1, 7, Vista (32/64-bit)

PCAN-Basic programming interface consisting of an interface

DLL, examples, and header files for all common programming

languages

Manual in PDF format

PCAN-PCI Express – User Manual

2Installing the Software and

the Card

This chapter covers the software setup for the PCAN-PCI Express

card (short: PCIe card) under Windows and the installation of the

card in the computer.

Setup the driver before installing the PCIe card.

Do the following to install the driver:

1. Insert the supplied DVD into the appropriate drive of the

computer. Usually a navigation program appears a few

moments later. If not, start the file Intro.exe from the root

directory of the DVD.

2. Select in the main menu Drivers, and then click on

Install now.

3. Confirm the message of the User Account Control in relation

to "Installer Database of PEAK Drivers".

The setup program for the driver is started.

4. Follow the instructions of the program.

PCAN-PCI Express – User Manual

Do the following to install the PCIe card into the computer:

Attention! Electrostatic discharge (ESD) can damage or destroy

components on the PCAN-PCI Express card. Take precautions

to avoid ESD when handling the card.

1. Four-channel version only: Connect the 10-pin connector of

CAN ports 3 and 4 with a cable from the slot bracket.

Figure 1: Position of the sockets for the CAN connection,

CAN 3 (upper left position), CAN 4 (upper right position)

2. Shut down the computer and switch it off.

3. Disconnect the computer from the power supply.

4. Open the computer's casing.

5. If applicable, remove a front blind in front of the desired slot

of the PCIe card. The additional slot bracket with connectors

used by the four-channel version needs a further place.

6. Insert the PCIe card into a vacant PCI Express slot. For

details refer to the documentation of the computer.

7. Close the computer's casing.

8. Reconnect the power supply of the computer.

PCAN-PCI Express – User Manual

Do the following to complete the initialization:

1. Turn on the computer and start Windows. Make sure again

that you are logged in as user with administrator privileges.

Windows notifies that new hardware has been detected. The

drivers are found and installed by Windows.

After the initialization process is finished successfully you can find

the entry “PCAN-PCI Express” in the branch “CAN-Hardware” of the

Windows Device Manager.

PCAN-PCI Express – User Manual

3Connecting the CAN Bus

3.1 D-Sub connector

A High-speed CAN bus (ISO 11898-2) is connected to the 9-pin

D-Sub connector. The pin assignment for CAN corresponds to the

specification CiA® 102.

Figure 2: Pin assignment of High-speed CAN connection

(view onto a male connector on the PCAN-PCI Express card)

With pin 1 devices with low power consumption (e.g. bus conver-

ters) can be directly supplied via the CAN connector. At delivery this

pin is not assigned. You can find a detailed description in the follo-

wing section 3.2.

Tip: You can connect a CAN bus with a different transmission

standard via a bus converter. PEAK-System offers different bus

converter modules (e.g. PCAN-TJA1054 for a Low-speed CAN

bus according to ISO 11898-3).

Otros manuales para PCAN-PCI Express

Tabla de contenidos

Otros manuales de Tarjeta PCI de Peak

Peak

Peak PCAN-cPCI Manual de usuario

Peak

Peak PCAN-PCI Manual de usuario

Peak

Peak PCAN-miniPCI Manual de usuario

Peak

Peak IPEH-003044 Manual de usuario

Peak

Peak PCAN-PCI Express FD Manual de usuario

Peak

Peak PCAN-PCI Express Manual de usuario

Peak

Peak PCAN-PCI Manual de usuario

Peak

Peak PCAN-PCI Manual de usuario

Peak

Peak IPEH-004026 Manual de usuario

Peak

Peak PCAN-PCI Manual de usuario

Peak

Peak IPEH-003026 Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario