PCE Americas FL-33458 Manual de usuario

SD card real time data recorder

with harmonic measurement

3 PHASE

Power Analyzer

our purchase o

this 3 PHASE

POWER ANALYZE

marks a step

forward for you into

t h e f i e l d o

precisio n

measurement.

l t hough t h i s

POWER ANALYZE

is a complex and

delicate instrument,

its durable structure

will allow many

years of use i

proper operating

techniques are

developed. Please

read the following

i n str u c t i o n s

carefully and always

keep this manual

within easy reach.

OPERATION MANUAL

PCE-PA 8300

PCE Americas Inc.

711 Commerce Way

Suite 8

Jupiter

FL-33458

USA

From outside US: +1

Tel: (561) 320-9162

Fax: (561) 320-9176

[email protected]

www.pce-instruments.com/english

www.pce-instruments.com

PCE Instruments UK Ltd.

Units 12/13

Southpoint Business Park

Ensign way

Hampshire / Southampton

United Kingdom, SO31 4RF

From outside UK: +44

Tel: (0) 2380 98703 0

Fax: (0) 2380 98703 9

[email protected]

Caution Symbol

Caution :

* Risk of electric shock !

* During the measurement,

do not open the cabinet.

Caution :

* Do not apply the overload

voltage, current to the input

terminal !

* Remove test leads before open

the battery cover !

* Cleaning - Only use the dry

cloth to clean the plastic case !

Environment Conditions

* Installation Categories III 600V.

* Pollution Degree 2.

* Altitude up to 2000 meters.

* Indoor use.

* Relative humidity 80% max.

TABLE OF CONTENTS

1. FEATURES................................................................1

2. SPECIFICATIONS.....................................................

2-1 General Specifications........................................

2-2 Electrical Specifications.......................................5

3. FRONT PANEL DESCRIPTION.....................................10

4. MEASURING PREPARATION ......................................13

4-1 The original screen.............................................

4-2 Entry the measurement Screen............................ 13

4-3 The summary description of keyboard.................. 15

4-4 SETUP KEY description........................................ 16

4-5 Setting function description before measuring....... 17

5. MEASURING PROCEDURES .......................................46

5-1 1Φ2W ( one phase by two wires )

measurement..................................................... 46

5-2 1Φ3W ( one phase by three wires )

measurement..................................................... 47

5-3 3Φ3W ( three phase by three wires )

measurement..................................................... 49

5-4 3Φ4W ( three phase by four wires )

measurement..................................................... 50

5-5 The CT and PT measurement...............................52

5-6 ZERO adjustment for Watt Hour...........................53

5-7 Harmonic Function Measurement ........................

5-8 Graphic Phasor Diagram...................................... 56

5-9 Voltage/Current Waveform..................................

5-10 Transient Capture ( Dips, Swells, Outage ).......... 60

5-11 Data Logger function.........................................63

5-12 Data Hold function............................................ 65

5-13 Backlight key....................................................

5-14 A ( Current ) Range key.....................................66

5-15 LOWBAT screen................................................ 67

5-16 Appendix 1.......................................................

6. MAINTENANCE......................................................... 69

6-1 Cleaning.............................................................69

6-2 Replacement of batteries .................................... 69

7. RS232 PC SERIAL INTERFACE...................................

8. Download the saving data from the SD card to

the computer ( EXCEL software ) .............................. 72

9. PATENT...................................................................

10. THE ADDRESS OF AFTER SERVICE CENTER ............

1. FEATURES

* Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,

3P/3W, 3P/4W.

* 3 current probes ( CP-1201 ) are included, if change the

current probes, the calibration procedures are not

necessary.

* Current probe input signal/ranges with selection :

Input signal (ACV) :

200 mV/300 mV/500 mV/1 V/2 V/3 V.

Ranges (ACA) :

20 A/200 A/2000 A/30 A/300 A/ 3000 A.

* Meter can cooperate the universal current probes.

* Complete set with 4 PCs Test Leads, 4 PCs Alligator clips,

3 PCs Clamp Probe ( CP 1201 ), AC to DC 9V adapter, 2

G SD memory card and Carrying bag.

*Measurement:

V (phase-to-phase), V (phase-to-ground)

A (phase-to-ground)

KW / KVA / KVAR / PF (phase)

KW / KVA / KVAR / PF (system)

KWH / KVAH / KVARH / PFH (system)

Phase angle

* Harmonics display (1-50th order).

* Simultaneous display of Harmonics and Wave form.

* Display of Waveform with Peak Values.

* Analysis of Total Harmonic Distortion ( THD ).

* Graphic Phase diagram with 3-Phase system parameters.

* 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR )

and Unbalanced Factor.

* Calculated Unbalanced Current through Neutral Line ( An )

* Capture Transient events (including Dip, Swell and

Outage ) with programmable threshold ( % ).

* Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to

1000 ).

* ACV input impedance is 10 Mega ohms.

* Safety Standard : IEC 1010, CAT III 600V.

* Built-in clock and Calendar, real time data record with SD

memory card , sampling time set from 2 to 7200

seconds. Just slot in the SD card into the computer, it

can down load the all the measured value with the time

information ( year, month, data, hour, minute, second )

to the Excel directly, then user can make the further data

analysis by themselves.

* Powered by AA ( UM-3 ) DC 1.5 V X 8 batteries ( Alkaline

type ) or DC 9V adapter.

* Computer data output, can cooperate with optional USB

Cable/USB-01, RS232 cable/UPCB-02 and Data

Acquisition software, SW-811.

* Optional current probes : CP-1201, CP-2000, CP-200,

CP-3000, detail specification.

* User can order the meter only ( without the current

probes ) with the special request as intend to cooperate

their own current probes.

*Patented.

2. SPECIFICATIONS

2-1 General Specifications:

Circuit Custom one-chip of microprocessor LSI

circuit

Display * LCD Size :

81.4 X 61 mm ( 3.2 X 2.4 inch )

* Dot Matrix LCD (320 X 240 pixels )

with back light.

Measurement * V (phase-to-phase)

* V (phase-to-ground)

* A (phase-to-ground)

* KW / KVA / KVAR / PF (phase)

KW / KVA / KVAR / PF (system)

KWH / KVAH / KVARH / PFH (system)

* Power factor

* Phase angle

* Frequency

* Harmonics display.

Wire 1P/2W, 1P/3W, 3P/3W, 3P/4W.

connections

Voltage ranges 10 ACV to 600 ACV, auto range.

Current probe * Current probe input signal volage ( ACV ) :

input signal

200mV/300mV/500mV/1V/2V/3V.

and range * Current probe input current range ( ACA ) :

20 A/200A/2000A (1200 A)/30A/300A/3000A

* Meter can cooperate the universal current probe.

Safety IEC1010 CAT III 600 V.

standard

ACV input 10 Mega ohms.

impedance

Range select ACV Auto range.

ACA Manual range.

Clamp 40 Hz to 1 KHz.

frequency

response

Spec. tested 45 to 65 Hz.

frequency

Over load ACV 720 ACV rms

protection ACA 1300 ACA with clamp probe

* For the Clamp ,CP-1201

Over Indicator * LCD display show " OL ".

* The data save into the SD card will show

" 9999 " or " 999 "( overleap the decimal point ).

Under Indicator * LCD display show " UR ".

* The data save into the SD card will show

" 9999 " or " 999 "( overleap the decimal point ).

Data Hold Freeze the display reading.

Data Record SD Card Record.

Sampling Time Approx. 1 second.

Power ON/OFF Manual OFF by push button.

Real time * Real time data logger, saved the data

data logger into SD memory card and down load

the all the measured value with the

time information ( year/month/data/

hour/minute/second ) down load

to the Excel

* Integration time for data logger :

2 seconds to 7200 seconds, the during

of setting step are 2 seconds.

Data Output RS232 computer serial interface :

USB/RS232 * Connect the optional USB cable

* Computer

USB-01 will get the USB plug.

interface

* Connect the optional RS232 cable

UPCB-02 will get the RS232

plug.

Operating 0 to 50 ( 32 to 122 ).℃℉

Temperature

Operating Less than 80% R.H..

Humidity

Power Supply * DC 1.5V, AA ( UM-3 ) Battery X 8 PCs

(Alkaline or heavy-duty battery).

* AC to DC 9V power adapter.

Power * Meter : 270 DCmA.

Consumption * Clamp : 22 DCmA.

Clamp max. 50 mm ( 2.0 inch ) Dia.

conductor Size

* For the Clamp ,CP-1201

Weight * Meter : 1010g ( includes batteries )

* Clamp ( includded cable ) : 500g

Dimension

Meter :

225 X 125 X 64 mm

( 8.86 X 4.92 X 2.52 inch )

Clamp :

210 X 64 X 33mm

( 8.3 X 2.5 X 1.3 inch )

Clamp Jaw : 86 mm (3.4 inch)- outside

Accessories * Instruction manual.............. 1 PC

Included *

est Leads (TL88-4AT)........ 1 Set (4 PCs)

* Alligator clips (TL88-4AC) 1 Set (4 PCs)

* Clamp Probe ( CP-1201 ).....

3 PCs

C to DC 9V adapter...........

1 PC

* SD card ( 2 G )...................

1 PC

* Carryin

....................... 1 PC

Optional * 2000 Amp current probe, CP-2000

Accessories * 200 Amp current probe, CP-200

* Flexible 3000 Amp current probe,

CP-3000

* USB Cable , USB-01

* RS232 cable, UPCB-02

* Data Acquisition software, SW-U811

* EXCEL Data Acquisition software,

SW-E802

2-2 Electrical Specifications:

ACV

Range Resolution Accuracy

10.0V to 600.0V 0.1V ± (0.5%+0.5V)

* Phase to neutral line

10.0V to 600.0V

* Phase to phase

ACA

Range Resolution Accuracy

20A 0.001A,

< 10 A

± (0.5%+0.1A)

0.01A,

10 A≧

200A 0.01A,

< 100 A

± (0.5%+0.5A)

0.1A,

100 A≧

1200A 0.1A,

< 1000 A

± (0.5%+5A)

1A,

1000 A≧

Power factor

Range Resolution Accuracy

0.00 to 1.00 0.01 ± 0.04

Remark :

* PFH : Long term power factor

* PFΣ:

For 3Φ4W, 3Φ3W

PFΣ= ( PF1 + PF2 + PF3 )/3

For 1Φ3W

PFΣ= ( PF1 + PF2 )/2

Φ( Phase angle )

Range Resolution Accuracy

-180° to 180° 0.1° ± 1°

* ACOS ( PF )

Frequency

Range Resolution Accuracy

45 to 65 Hz 0.1 Hz 0.1 Hz

Tabla de contenidos

Otros manuales de Instrumento de medición de PCE Americas

PCE Americas

PCE Americas PCE-SMM 1 Manual de usuario

PCE Americas

PCE Americas PCE-VD 3 Manual de usuario

PCE Americas

PCE Americas PCE-RCM 11 Manual de usuario

PCE Americas

PCE Americas PCE-PCO 1 Manual de usuario

PCE Americas

PCE Americas PCE-WL 2 Manual de usuario

PCE Americas

PCE Americas PCE-PEL 20 Manual de usuario

PCE Americas

PCE Americas PCE-DRB 1 Manual de usuario

PCE Americas

PCE Americas PCE-WM 1 Manual de usuario

PCE Americas

PCE Americas PCE-VM 3D Manual de usuario

PCE Americas

PCE Americas PCE-VM 5000 Manual de usuario

PCE Americas

PCE Americas PCE-6801 Manual de usuario

PCE Americas

PCE Americas PCE-830 Manual de usuario

PCE Americas

PCE Americas PCE-318 Manual de usuario

PCE Americas

PCE Americas PCE-WT 1N Manual de usuario

PCE Americas

PCE Americas CA-C C1XX Manual de usuario

PCE Americas

PCE Americas PCE-HMM Manual de usuario

PCE Americas

PCE Americas PCE-CSM 8 Manual de usuario

PCE Americas

PCE Americas PCE-HT 420 Manual de usuario

PCE Americas

PCE Americas PCE-428 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario