Parle Innovation Inc. eyeQ Manual de usuario
User Guide
Live in the moment
Welcome to eyeQ
Let’s get started on enhancing your view-and
capture experiences
Table of contents
A. Package contents
B. Instructions for safe use
C. Setup
D. Top 5 FAQ
E. Warranty
Welcome to eyeQ
Let’s get started on enhancing your view-and
capture experiences
Please read the instructions for safe use and setup carefully before using, and follow all the
safety precautions. Parle Innovation Inc. © does not take any responsibility for safety accidents
caused by non-product quality problems such as improper usage or other external factors.
1.
A. Package contents
(Smartphone not included)
• eyeQ device
• Shoulder/neck strap
• eyeQ carrying bag
• Mini USB charging cable
• Quick start guide and product documentation
B. Instructions for safe use
• Do not leave eyeQ in direct sunlight for prolonged periods of time
• Avoid looking directly into the sun with the eyeQ
• Do not expose to water with charging cable attached
• Do not immerse in water
• Not for use in climate conditions below 32°F / 0°C or above 95° F / 35°C
Tripod Adapter
Eye-lens IPD Adjustment Dial
Neck Strap Rings
Viewing Hood
Phone Release Bars
Micro USB Charge Port
Pushbutton for Pairing and On-Off
Touchpad
Indicator Light
NOTE:
To enjoy the benefits of the eyeQ device, it must be used with your smartphone.
Refer to the outside of the box to see which smartphone models are supported
by the eyeQ.
2.
C. Setup
1. Charge your eyeQ:
Though partially charged prior to shipment,
we recommend that you always fully
charge your eyeQ prior to use. Charging the
eyeQ does not charge your smartphone.
You will, however, be able to charge your
phone with your phone’s charging cord and
an external phone charger in your pocket
while using the eyeQ.
Insert the mini USB cable (included with
your eyeQ) into the USB port located on the
front face mount of the eyeQ and connect
the other end of the mini USB cable to a USB
power source.
The eyeQ indicator light will blink red while
charging and switch to a continuous green
when charged. After disconnecting from the
USB cable, the eyeQ will be in low power
mode as indicated by a slow blinking green
signal. eyeQ can be powered off by pressing
the silver button until it flashes red for about
2 seconds and stops flashing. A momentary
press will initiate Bluetooth pairing.
3.
!
!
3. Turn on your eyeQ
• Open eyeQ app on your phone - make sure
your phone setting has Bluetooth “ON"
• Press silver button down until the
indicator light flashes white
• Blue blinking indicates eyeQ is ready to
actively pair with the eyeQ app
• When it’s paired, you’ll see the Bluetooth
icon in the upper right corner in the app,
turn from red to blue
• If pairing fails, light will turn to a slow
Blue blinking - Repeat by pressing the
silver button again
2. Download and start the free app
onto your smartphone
The eyeQ Live application is available through
Apple’s App store or Google Play Store.
a. Download and install the eyeQ appIn your
phone’s settings, verify that Bluetooth is“ON”.
b. Open the eyeQ app. In the upper right-hand
corner, you will see the Bluetooth icon in red.
4.
4. Insert your smartphone into the eyeQ
Pinch the two parallel bars on the mount
and slide in your phone. Make sure your
phone screen is facing inward then release
the pinch. When mounted correctly, the
phone’s camera should be positioned in the
upper left-hand corner area. You can keep
your phone case on if it is a slender case of
approximately 2.2mm thick. Otherwise, you
will need to remove it before sliding your
phone securely into eyeQ. To remove your
smartphone, simply reverse the procedure.
5.
!
!
!
1
Pinch Phone Release
Bars Together
2
Insert Phone, Main Camera Facing Outward
3
Make Sure Phone is Centered
!
1
Pinch Phone Release
Bars Together
2
Insert Phone, Main Camera Facing Outward
3
Make Sure Phone is Centered
5. Adjust the eyeQ’s lens
Locate the lens dial underneath the
viewfinder. The lens dial is used to
adjust the inner pupillary distance for
better visual clarity and focus. Start
with the lenses at their closest spacing,
then turn the dial until you are able to
see the clearest image on the screen.
6. Use the touch pad
The eyeQ’s touch pad, the recessed square
area located at the top of your eyeQ, is the
connection between the app and your fingers
that allows you to access the apps functions
quickly. Take time to orient your fingers to
this area. For example, notice that the zoom
is controlled by left to right finger gestures
rather than up and down ones. Once you
have a feel for the motion sensing of the
touch pad, using it to control the apps digital
features will be simple.
7. Turn off your eyeQ
Hold silver power button until the indicator
light flashes red and then goes dark.
6.
For more information regarding the use and
setup of your eyeQ please go to our website.
www.eyeQlive.com/support
7.
Otros manuales de Prismáticos de Parle Innovation Inc.
