Parkside PAT 4 A1 Manual de usuario
CORDLESS STAPLER PAT 4 A1
CORDLESS STAPLER
Translation of the original instructions
IAN 277756
AKKU-TACKER
Originalbetriebsanleitung
GB/IE/NI Translation of the original instructions Page 1
DE/AT/CH Originalbetriebsanleitung Seite 19
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
A
B
PAT 4 A1 GB│IE│NI │ 1 ■
Contents
Introduction .................................. 2
Intended use..........................................2
Features .............................................2
Package contents ......................................3
Technical details .......................................3
General Power Tool Safety Warnings............. 5
1. Work area safety ....................................5
2. Electrical safety .....................................5
3. Personal safety......................................6
4. Power tool use and care ..............................7
5. Use and handling of the cordless electrical power tool.......8
6. Service ............................................9
Appliance-specific safety instructions for tackers ..............9
Safety guidelines for battery chargers .....................10
Beforeuse .................................. 11
Charging the appliance battery..........................11
Start charging........................................11
Stop charging........................................11
Operation .................................. 12
Filling the magazine shaft...............................12
Use........................................ 12
Switch on ...........................................12
Troubleshooting ......................................12
Maintenance and cleaning ..................... 13
Kompernass Handels GmbH warranty........... 13
Service .............................................15
Importer............................................16
Disposal .................................... 16
Translation of the original Conformity Declaration . 17
PAT 4 A1
■ 2 │ GB│IE│NI
CORDLESS STAPLER PAT 4 A1
Introduction
Congratulations on the purchase of your new appliance. You have
selected a high-quality product. The operating instructions are part of
this product. They contain important information about safety, usage
and disposal. Before using the product, please familiarise yourself
with all operating and safety instructions. Use the product only as
described and for the range of applications specified. Please also
pass these operating instructions on to any future owner.
Intended use
This cordless tacker is intended for stapling cardboard, insulating
material, leather, material (textiles or natural fibres) and comparable
materials onto softwoods or wood-like material in private house-
holds. The appliance is only for use in dry rooms. Any other uses
of or modification to the appliance is deemed to be improper and
carries the risk of serious personal injury. The manufacturer accepts
no responsibility for damage(s) attributable to misuse. This appliance
is not intended for commercial use.
Features
Trigger
Charging socket (device)
Magazine slider
Release
Magazine shaft
Fill level indicator (wire staples)
Tacker nose
Charger
On/Off switch
Battery charge level indicator
PAT 4 A1 GB│IE│NI │ 3 ■
Package contents
1 cordless stapler PAT 4 A1
1 charger PAT 4 A1-1
1000 staples 8 mm
1 set of operating instructions
Technical details
Cordless stapler: PAT 4 A1
Rated voltage: 4 V (DC)
Battery (integrated): LITHIUM ION Lithium
Cells: 1
Capacity: 1300 mAh
Magazine shaft capacity: 100 pcs
Wire staples:
Staple width: 11.4 mm outside
Staple length: 4–10 mm
Battery charger: PAT 4 A1-1
INPUT:
Rated voltage: 100–240 V ~, 50/60 Hz (AC)
Rated power
consumption: 0.2 A
Polarity: positive
OUTPUT:
Rated voltage: 5 V (DC)
Rated current: 600 mA
Charging time: approx. 180 min
Protection class: II/ (double insulation)
Typ 53
4–10mm
PAT 4 A1
■ 4 │ GB│IE│NI
Noise emission value:
the measured values for sound comply with EN 60745. The A-weight-
ed single-event noise level, standardised to 1 s, is typically:
Sound pressure level: LpA = 65.4 dB (A)
Uncertainty: KpA = 3 dB
Sound power level: LWA = 76.4 dB (A)
Uncertainty: KWA = 3 dB
Wear hearing protection!
Vibration values determined in accordance with EN 60745:
Vibration emission value ah= 2.235 m/s2
Uncertainty K = 1.5 m/s2
NOTE
► The vibration emission value specified in these instructions
has been measured in accordance with a standardised
measuring procedure and can be used to make equipment
comparisons. The specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration emission value varies in accordance with the use
of the power tool and may be higher than the value specified
in these instructions in some cases. Regular use of the power
tool in such a way may cause the user to underestimate the
vibration. Try to keep the vibration loads as low as possible.
Examples of measures for reducing the vibration load are
wearing gloves when using the tool and limiting the working
time. All states of operation must be taken into consideration
(e.g. times when the power tool is switched off and times
where the power tool is switched on but running without load).
PAT 4 A1 GB│IE│NI │ 5 ■
General Power Tool Safety
Warnings
WARNING!
► Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug
in any way.
Do not use any adapter plugs with earthed (grounded) power
tools.Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is earthed or grounded.
PAT 4 A1
■ 6 │ GB│IE│NI
c) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pull-
ing or unplugging the power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or medi-
cation. A moment of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-po-
sition before connecting to power source and/or battery pack,
picking up or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
PAT 4 A1 GB│IE│NI │ 7 ■
e) Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction
and collection facilities, ensure these are connected and prop-
erly used. Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool acciden-
tally.
d) Store idle power tools out of the reach of children. Do not al-
low persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the
hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Tabla de contenidos
Idiomas:
Otros manuales de Herramientas eléctricas de Parkside
Parkside
Parkside PKGA 20-Li B1 Manual de usuario
Parkside
Parkside PSTD 800 A1 Manual del propietario
Parkside
Parkside PMFW 280 A2 Manual de usuario
Parkside
Parkside PMFW 310 D2 Manual de usuario
Parkside
Parkside PSTDA 20-LI B3 Manual de usuario
Parkside
Parkside PHET 15 A1 Manual de usuario
Parkside
Parkside PGSA 12 A1 Manual de usuario
Parkside
Parkside PES 200 B1 Manual de usuario
Parkside
Parkside PHKSA 18-Li B2 Manual del propietario
Parkside
Parkside PFBS 9.6V Guía rápida
Parkside
Parkside 73787 Manual de usuario
Parkside
Parkside PEC 200 Manual de usuario
Parkside
Parkside IAN 96269 Manual de usuario
Parkside
Parkside POF 1300 Manual de usuario
Parkside
Parkside POF 1200 B2 Manual de usuario
Parkside
Parkside PDSP 1000 A1 SANDBLASTER GUN Manual de usuario
Parkside
Parkside PSTDA 20-LI B3 Manual de usuario
Parkside
Parkside PFBS 12 B2 Manual de usuario
Parkside
Parkside PBSG 55 A1 Manual de usuario
Parkside
Parkside PSTD 800 A1 Guía de inicio rápido
