Parkside PEPS 3 A1 Manual de usuario

ELECTRICAL PRECISION SCREWDRIVER PEPS 3 A1

ЕЛЕКТРИЧЕСКАПРЕЦИЗНА

ОТВЕРТКА

Превод на оригиналното ръководство

за експлоатация

ȘURUBELNIŢĂ ELECTRICĂ

DE PRECIZIE

Traducerea instrucţiunilor de utilizare original

ELEKTRIČNI PRECIZNI ODVIJAČ

Prijevod originalnih uputa za uporabu

ELEKTRIČNI PRECIZNI ODVIJAČ

Prevod originalnog uputstva za upotrebu

ELECTRICAL PRECISION

SCREWDRIVER

Translation of the original instructions

ΗΛΕΚΤΡΙΚΟ ΚΑΤΣΑΒΙΔΙ

ΑΚΡΙΒΕΙΑΣ

Μετάφραση των αυθεντικών οδηγιών λειτουργίας

ELEKTRISCHER PRÄZISIONS-

SCHRAUBENDREHER

Originalbetriebsanleitung

IAN 423419_2207

GB/CY Translation of the original instructions Page 1

HR Prijevod originalnih uputa za uporabu Stranica 17

RS Prevod originalnog uputstva za upotrebu Strana 33

RO Traducerea instrucţiunilor de utilizare original Pagina 51

BG Превод на оригиналното ръководство

за експлоатация Cтраница 69

GR/CY Μετάφραση των αυθεντικών οδηγιών

λειτουργίας Σελίδα 87

DE/AT/CH Originalbetriebsanleitung Seite 107

Before reading, unfold the page containing the illustrations and familiarise

yourself with all functions of the device.

Prije nego što pročitate tekst, otvorite stranicu sa slikama i upoznajte se na

osnovu toga sa svim funkcijama uređaja.

Pre čitanja rasklopite obe strane sa slikama te se upoznajte sa svim funkcijama

uređaja.

Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate

funcţiile aparatului.

Преди да прочетете отворете страницата с фигурите и след това се

запознайте с всички функции на уреда.

Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και

εξοικειωθείτε με όλες τις λειτουργίες της συσκευής.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen

Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

PEPS 3 A1 GB│CY │ 1 ■

Contents

Introduction...................................2

Intended use .........................................2

Features .............................................3

Package contents ......................................3

Technical speciﬁcations .................................3

General power toolsafetywarnings ..............4

1. Work area safety ....................................5

2.Electricalsafety.....................................5

3. Personal safety......................................6

4. Power tool use and care ..............................7

5.Service............................................8

Safety instructions for screwdrivers.........................8

Safety instructions for batteries............................8

Before use ....................................9

Removing/inserting batteries .............................9

Inserting bits ..........................................9

Using the appliance ............................9

Switching on/oﬀ.......................................9

Maintenance, storage and cleaning ..............10

Disposal.....................................11

Kompernass Handels GmbH warranty ...........12

Service......................................15

Importer ....................................15

Original declaration of conformity ...............15

PEPS 3 A1■ 2 │ GB│CY

ELECTRICAL PRECISION SCREWDRIVER

PEPS 3 A1

Introduction

Congratulations on the purchase of your new tool. You have selected

a high-quality product. The operating instructions are part of this

product. They contain important information about safety, usage and

disposal. Before using the product, please familiarise yourself with all

operating and safety instructions. Use the product only as described

and for the speciﬁed range of applications. Please also pass these

operating instructions on to any future owner.

Intended use

This electrical precision screwdriver is intended for tightening and

loosening screws during delicate repair work, such as on spectacles,

watches and smartphones.

Use the electrical precision

screwdriver only as described and for the

speciﬁed range of applications.

The electrical precision screwdriver is not intended for commercial/

industrial use. Any other use or modiﬁcation of the appliance is

deemed to be improper and carries a signiﬁcant risk of accidents.

The manufacturer accepts no responsibility for damage attributable

to misuse.

PEPS 3 A1 GB│CY │ 3 ■

Features

1Cap

Electrical precision screwdriver

3Rotation direction switch: left ▼

4Rotation direction switch: right ▲

5LED work light

6Tool holder

7Bits

Package contents

1 electrical precision screwdriver

20 bits PH000/PH0/PH1/PZ0/PZ1/SL1.0/SL2.0/SL3.0/T5/T6/

T8/P2/ P5/P6/H2.5/H3/SQ0/Triangle 3.0/Y2.5/U3.0

2 batteries 1.5 V (DC), LR3, AAA (alkaline TRONIC)

1 operating manual

Technical speciﬁcations

Electrical precision screwdriver

Nominal voltage 3 V (direct current)

Rated idle speed n0160 rpm

Max. torque 0.2 Nm (electrical operation),

3 Nm (hand operation)

Tool holder Suitable for 4 mm bits

For batteries 2 x 1.5 V (DC), LR3,

AAA (alkaline TRONIC)

PEPS 3 A1■ 4 │ GB│CY

Noise and vibration data

The measured values have been determined in accordance with

EN62841. The A-rated noise level of the power tool is typically:

Sound pressure level LpA = 47.4 dB (A)

Sound power level LWA = 58.4 dB (A)

Uncertainty K KpA/WA = 3 dB

Vibration values (vector total of three directions) determined in

accordance with EN 62841:

Screwing: vibration emission value ah< 2.5 m/s2

Uncertainty K = 1.5 m/s2

NOTE

► The vibration emission values and the noise emission values

given in these instructions have been measured in accordance

with a standardised test procedure and can be used for com-

parison of the power tool with another tool.

► The speciﬁed total vibration values and the noise emission

values can also be used to make a provisional load estimate.

General power

toolsafetywarnings

WARNING!

► Read all safety warnings, instructions, illustrations and speci-

ﬁcations provided with this power tool. Failure to follow all

instructions listed below may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

PEPS 3 A1 GB│CY │ 5 ■

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas

invite accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed

(grounded)

power tools.Unmodiﬁed plugs

and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such

as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pull-

ing or unplugging the power tool. Keep cord away from heat,

oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When working outdoors with an electrical power tool always

use extension cords that are also suitable for use outdoors.

Use of a cord suitable for outdoor use reduces the risk of electric

shock.

f) If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use of

an RCD reduces the risk of electric shock.

PEPS 3 A1■ 6 │ GB│CY

3. Personal safety

a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the inﬂuence of drugs, alcohol or medi-

cation. A moment of inattention while operating a power tool

may result in serious personal injury.

b) Use personal protective

equipment. Always wear eye protec-

tion.

Protective equipment such as a dust mask, non-skid safety

shoes, hard hat or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the

oﬀ-position before connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising power tools that have

the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep

your hair and clothing away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-related

hazards.

PEPS 3 A1 GB│CY │ 7 ■

h) Do not allow yourself to get lulled into a false sense of security

and do not ignore the safety regulations for power tools, even

if you are familiar with the power tool after repeated use.

A careless action can cause severe injury within a fraction of a

second.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and

oﬀ. Any power tool that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the

battery pack, if detachable, from the power tool before making

any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of children, and do not

allow persons unfamiliar with the power tool or these instruc-

tions to operate the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment

or binding of moving parts, breakage of parts and any other

condition that may aﬀect the power tool’s operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are

easier to control.

Otros manuales para PEPS 3 A1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Destornillador eléctrico de Parkside

Parkside

Parkside PASD 4 B2 Manual de usuario

Parkside

Parkside KH 3101 2 SPEED RECHARGEABLE ELECTRIC DRILL... Manual de usuario

Parkside

Parkside 328024 2001 Manual de usuario

Parkside

Parkside PABS 20-Li E6 Manual de usuario

Parkside

Parkside PSSA 3.6 C4 Manual de usuario

Parkside

Parkside 345138 2004 Manual de usuario

Parkside

Parkside PBSA 12 D4 Manual de usuario

Parkside

Parkside PASS 3.6 A1 Manual de usuario

Parkside

Parkside 74287 Manual de usuario

Parkside

Parkside PBSA 12 D4 Manual de usuario

Parkside

Parkside PAS 4 C4 Manual de usuario

Parkside

Parkside PABS 20-Li D5 Manual de usuario

Parkside

Parkside PAS 7.2 A1 Manual de usuario

Parkside

Parkside PAS D5 Manual de usuario

Parkside

Parkside PAS 7.2 A1 Manual de usuario

Parkside

Parkside PASD 4 A1 Manual de usuario

Parkside

Parkside KH 3036 LITHIUM ION CORDLESS SCREWDRIVER Manual de usuario

Parkside

Parkside PAS 4 C4 Manual de usuario

Parkside

Parkside PAS 4 B4 Manual de usuario

Parkside

Parkside PAS 7.2 Manual de usuario

Parkside

Parkside PASD 4 A1 Manual de usuario

Parkside

Parkside PAWS 3.6 A1 Guía de inicio rápido

Parkside

Parkside PAS 7.2 A1 Manual de usuario

Parkside

Parkside 102653 Manual del propietario

Manuales populares de Destornillador eléctrico de otras marcas

Makita

Makita DFT085F Manual de usuario

Makita

Makita DFL650F Manual de usuario

AEG

AEG BST 18BLX2-0 Manual de usuario

Ingersoll-Rand

Ingersoll-Rand D5000 Series Manual de usuario

BGS technic

BGS technic 956 Manual de usuario

Hilti

Hilti SD 6000 Manual de usuario

Festool

Festool TI 15 Manual de usuario

Makita

Makita DWT190 Manual de usuario

Matatakitoyo Torque Tools

Matatakitoyo Torque Tools MTD Manual de usuario

Skil

Skil 2346 Instrucciones de montaje

DeWalt

DeWalt XR LI-ION DCD931 Manual de usuario

Festool

Festool DWC 18-2500 Manual de usuario

EINHELL

EINHELL TE-CD 12/1 Li Series Manual de usuario

Makita

Makita BFT043F Manual de usuario

Stanley

Stanley SCD2 Manual de usuario

Atlas Copco

Atlas Copco LUM12 SR Hoja de instrucciones

FAR

FAR TECNUM Manual de uso y cuidado

GRAPHITE PRO

GRAPHITE PRO 59GP400 Manual de usuario