Paradox K07C Manual de usuario

K07C: Grafica Color Keypad

V1.0

Reference and Installation Manual

Warranty

For complete warranty information, please visit www.paradox.com/terms.

Your use of the Paradox product signifies your acceptance of all warranty

terms and conditions. Imperial, Grafica, BabyWare, EVO and WinLoad

are trademarks or registered trademarks of Paradox Security Systems

Ltd. or its affiliates in Canada, the United States and/or other countries.

For the latest product approvals, such as UL and CE, please visit

reserved. Specifications may change without prior notice.

Patents

One or more of the following US patents may apply: 7046142, 6215399,

6111256, 6104319, 5920259, 5886632, 5721542, 5287111, 5119069,

5077549 and RE39406 and other pending patents may apply. Canadian

and international patents may also apply.

Table of Contents

Overview ................................................................ 5

Description .............................................................................. 5

Features.................................................................................. 5

Installation .............................................................. 6

Viewing Angle.......................................................................... 6

Keypad Cover Clearance........................................................ 6

Mounting the Metal Wall Plate................................................. 7

Connecting Grafica.................................................................. 7

Keypad Input........................................................................... 9

Temperature Sensors.............................................................. 9

Mounting Grafica................................................................... 10

Removing Grafica.................................................................. 11

Firmware Upgrade................................................................. 12

Imperial System Programming ............................... 12

EVO/DGP System Programming............................. 12

Entering Module Programming Mode.................................... 13

Programming Methods.......................................................... 13

Feature Select Programming ................................................ 13

Decimal Programming........................................................... 13

Hexadecimal Programming................................................... 13

Keypad Options..................................................................... 14

Temperature Broadcast......................................................... 18

EVO/DGP Programming Sections......................................... 20

Specifications

Power input Typically 12 to 16 Vdc

Current

consumption 120 mA (at maximum backlight setting)

Number of inputs 1

Temperature

sensors 1 built-in, 1 optional external temperature sensor

(TEMP07)

Locate indication Blue LED flashes

Multibus/Combus

fault indication Fault indication message will appear on the LCD screen.

Anti-tamper switch Yes (optional)

Display TFT screen (Thin Film Transistor). Under electrostatic-

discharge (ESD) conditions the screen may go blank. To

reset the screen press any key or wait one minute.

Screen size: 9cm (3.5”)

Screen resolution: 320x240

Colors: 64k colors

Compatibility Imperial V32

EVO48/192

DGP-NE96

DGP-848

NOTE: Imperial systems require BabyWare V1.0.300 and

higher. Refer to the Imperial System Guide.

Overview PAGE 5

Chapter 1: Overview

1. SD memory card slot

2. Color LCD screen

3. Scroll keys - navigation

4. Temperature sensor

5. Action keys - selection

6. Panic keys

7. Alphanumeric keys

A) Power light:

On = AC power

Off = Power failure

Flash = System is locating the

keypad

Description

Grafica sets a new milestone for

keypads in the security industry.

With its full color LCD screen,

Grafica offers the unique ability to

view zone locations on floor plan

drawings.

Other features include a photo

screensaver, downloadable tunes

and bitmaps for many functions, a

smart search engine for users and

zones, and an alarm clock.

Features

• Photo screensaver

• Downloadable tunes and

bitmaps

• Smart search engine for users

and zones

• Alarm clock

• Indoor temperature sensor

• Outdoor temperature sensor

(optional)

• 14 one-touch action buttons

• 3 keypad-activated panic

alarms

• Adjustable backlight and

volume

PAGE 6 Installation

Chapter 2: Installation

Viewing Angle

Grafica’s graphic LCD screen is best viewed from an angle between 20°

and -10° (see Figure 1). Be sure to install the Grafica keypad at a height

and in a direction that provides the best viewing angle.

Figure 1

Keypad Cover Clearance

Grafica’s keypad cover requires sufficient space in order to open

properly. Ensure a clearance of approximately 9cm (3.5in) between the

bottom of the keypad and possible obstructions such as a light switch

that may prevent the keypad from opening properly (see Figure 2).

Figure 2

-10°

0°

+20°

- 9cm (3.5”)

- Obstruction

Installation PAGE 7

Mounting the Metal Wall Plate

1. Place metal wall plate to desired position.

2. Drill and insert screws into holes labeled “A” (see Figure 3). Both the

top and bottom center holes “C” can be used for an electrical box.

Figure 3

Connecting Grafica

Grafica connects to the control panel’s Multibus/Combus in a star and/or

daisy chain configuration. The Multibus/Combus consists of four wires

that provide power and two-way communication between the control

panel and all modules connected to it. Connect the four terminals

labelled RED, BLK, GRN and YEL of the module to the corresponding

terminals on the control panel (see Figure 4 on page 8). For the

maximum allowable installation distance, refer to the Imperial System

Guide or the EVO/DGP Reference & Installation Manual.

A A

- Mounting holes

- For clip

- Can be used for

electrical box

PAGE 8 Installation

Figure 4

Figure 5

- * The keypad zone follows the control panel’s EOL definition. The zone speed is set

at 600mS and cannot be programmed.

Grafica

Multibus/

Combus

1 K9*

EOL

Connecting Grafica with Keypad Input

- To other modules

- To control panel

- Door Contact

- To other modules

- To control panel

- Temperature Sensor (TEMP07)

Grafica

Multibus/

Combus

Connecting Grafica with Temp. Sensor

30.5m (100ft) max.

Installation PAGE 9

Keypad Input

Grafica’s keypad input can be utilized as a zone input or as an input for

the optional temperature sensor (see Optional External Temperature

Sensor). Refer to Figure 5 on page 8 for connection instructions.

Temperature Sensors

Grafica offers a built-in temperature sensor and an optional external

temperature sensor.

Built-in Temperature Sensor

If the Inside Temp. ON option is enabled, the built-in temperature

sensor’s (see Figure 6) reading will display on the System Status

screen next to the word “IN”. If another temperature sensor is

required, see Optional External Temperature Sensor.

Figure 6

Optional External Temperature Sensor

Grafica offers an optional external temperature sensor (TEMP07)

that connects to Grafica’s keypad input (see Keypad Input). If the

Outside Temp. ON option is enabled, the sensor’s reading will display

on the System Status screen next to the word “OUT”.

Built-in Temperature Sensor

PAGE 10 Installation

Mounting Grafica

1. Place Grafica’s back plate flush against the mounted metal wall plate

“B” (see Figure 7).

Figure 7

2. Slide Grafica’s open slots labeled “A” (see Figure 8) onto the metal

wall plate’s tabs labeled “A” (see Figure 7).

Figure 8

3. Gently apply downward pressure to snap Grafica onto the metal wall

plate.

- Metal wall plate tabs

- Metal wall plate

- Optional screw

Clip

Grafica back view

Tabla de contenidos

Otros manuales de Sistema de seguridad de Paradox

Paradox

Paradox Spectra SP Series Manual de instrucciones

Paradox

Paradox MG5000 Manual de usuario

Paradox

Paradox Esprit 738 EXPRESS Manual de usuario

Paradox

Paradox ESPRIT 728 ULT Manual de usuario

Paradox

Paradox SPECTRA 1727 Manual de usuario

Paradox

Paradox 1686V Manual de usuario

Paradox

Paradox EVOHD+ Manual de usuario

Paradox

Paradox Imperial Digiplex Evo Manual de usuario

Paradox

Paradox 1686V Manual de usuario

Paradox

Paradox IP100 Manual de usuario

Paradox

Paradox Esprit 727 Manual de usuario

Paradox

Paradox STAY D MG5000 Manual de usuario

Paradox

Paradox IP150 Manual de usuario

Paradox

Paradox DGP2-641 Manual de usuario

Paradox

Paradox Magellan MG5050 EN Manual de usuario

Paradox

Paradox Digiplex EVO EVO48 Manual de usuario

Paradox

Paradox K32LCD+ Manual de usuario

Paradox

Paradox Digiplex EVO DGP2-640 Manual de usuario

Paradox

Paradox Magellan K636 Manual de usuario

Paradox

Paradox Esprit 748ES Instrucciones de funcionamiento

Paradox

Paradox MAGELLAN MG6250 Manual de usuario

Paradox

Paradox MG5000 Manual de usuario

Paradox

Paradox PGM4 Manual de usuario

Paradox

Paradox IP100 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario