Panel PMG2 Series Manual de usuario

www.panel.it 1

Industrial Monitor PMG2 series

Capacitive touchscreen

User’s manual

Version 1.1

All information contained in this manual, including all photographs, illustrations and software, is protected under international copyright laws, with all

rights reserved. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written

consent from Panel S.r.l. The information contained herein is believed to be accurate as of the date of publication; however, Panel S.r.l, makes no

warranty, ex- pressed or implied, with regard to the products or documentation contained within this manual. Panel S.r.l. reserves the right to change

the contents of this manual without notice. Panel shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the

use of any product, nor for any infringements upon the rights of third parties, which may result from such use. Any implied warranties of

merchantability or fitness for any particular purpose is also disclaimed. Soft- ware names, hardware names and trademarks are registered by their

respective companies.

www.panel.it 2

Chapter 1: Preface

1.1 Safety rules................................................................................................................3

1.2 Product checking...................................................................................................3

1.3 Package content....................................................................................................4

1.4 Declaration of conformity..................................................................................4

1.5 Warranty and RMA................................................................................................5

1.6 Technical support and assistance................................................................5

Chapter 2: Technical data

2.1 Introduction..............................................................................................................6

2.2 Products specifications.....................................................................................6

2.3 Bespoke front graphic customization........................................................6

2.4 Touchscreen specifications............................................................................7

2.5 Mechanical dimensions.....................................................................................8

2.6 Mechanical cut-out (panel mounting)........................................................9

2.7 VESA mounting......................................................................................................10

2.8 Chemicals and solvents resistance.............................................................11

Chapter 3: Installation and wiring

3.1 Mounting distance................................................................................................12

3.2 Inclined mounting..................................................................................................12

3.3 Fasten PMG2...........................................................................................................13

3.4 Connecting DC power.......................................................................................14

3.5 Connecting AC power.......................................................................................14

3.6 Functional ground................................................................................................15

Chapter 4: Monitor connectors

4.1 PMG2 I/O connectors………………………………………………………………………. 16

4.2 AD-board layout....................................................................................................16

Chapter 5: System setup

5.1Touchscreen driver and calibration.............................................................17

5.2 Monitor settings (OSD).......................................................................................17

Chapter 6: Maintenance

6.1 Cleaning.....................................................................................................................18

6.2 Spare parts...............................................................................................................18

www.panel.it 3

Chapter 1: Preface

1.1 Safety rules

All the monitor PMG2 series have been designed and built taking into account all the issues associated with an

industrial environment such as that where it is necessary to ensure the operation of the system in the presence of

vibration, moisture, dust and critical heat conditions.

Only skilled staff must make any job on the device, only after having fully read and understood the safety instructions.

Before installing and using the device, note the following precautions:

-Read all instructions carefully.

-Do not place the unit on an unstable surface, cart, or stand.

-Avoid using the system near water, in direct sunlight, or near a heating device.

-To prevent electrical shock or equipment damage, unplug the power cord from the power supply prior to

installing or wiring the PC.

-Do not disassemble or modify the monitor. Doing so may cause a fire or an electric shock.

All tasks such as the installation, commissioning and servicing of devices are only permitted to be carried out by

qualified personnel. Qualified personnel are those familiar with the transport, mounting, installation,

commissioning and operation of devices who also have the appropriate qualifications. National accident

prevention regulations must be observed.

1.2 Product checking

Preliminary operations to be made as soon as you receive the PANEL product:

-Check if the packing hasn’t undergone any damage due to transport.

-Verify if the packing contents correspond to the delivery note.

The product model, code and serial number are shown on the identification plate which is positioned on the rear.

If serious damages or inconsistency are found between the packing contents and the delivery note, please contact the

PANEL SRL sales department immediately.

It’s advisable to keep the original packing in order to use it for possible transports back in assistance.

www.panel.it 4

1.3 Package contents

The following items are included in the PMG2 unit’s package. Before using the PMG2, please check all the items match

the manual list.

1.4 Declaration of conformity

CE Mark, product complies with all applicable directives and their harmonized EN standards.

Doc. Int. Panel: 29102014

The products herewith complies to the requirements of:

-Low voltage directive 2006/95/EC

-EMC Directive 2004/108/EC

-RoHS Directive 2011/65/EU

-Carries marking

-EMC: EN 55022:2010 Class B

-EMC: EN 55024:2010 Class B

-LVD: EN 60950-1:2006+A11:2009+A1:2010+A12:2011

-LVD: EN 62311:2008

-LVD: EN 62479:2010

-RoHS EN 50581:2012

-Energy Use: Regulation (EC) no. 617/2013

-Energy Use: Regulation (EC) EN 62623:2013

PMG2 DC power supply

Qty 1 Monitor

Qty 1 Quick guide

Qty 1 Connector DC supply

Qty 4 Retaining clips (with size up to 17”)

Qty 6 Retaining clips (with size 18.5”/ 21.5”)

PMG2 AC power supply

Qty 1 Monitor

Qty 1 Quick guide

Qty 1 Power cable (IT) 1.8m

Qty 4 Retaining clips (with size up to 17”)

Qty 6 Retaining clips (with size 18.5”/ 21.5”)

www.panel.it 5

1.5 Warranty and RMA

Panel manufactures new products that are in accordance with industry standard. Panel warrants that products will be

free from defect in material and workmanship for 2 years, beginning on the date of invoice by Panel.

PANEL will engage to repair or eventually replace, at its discretion, the whole device or its components, which show

construction defects or malfunction if these are pointed out in writing during the warranty period.

The warranty is limited to the repairing of the defective product at our headquarters or, according to PANEL

indisputable judgment, to the replacement of the product itself.

The product under warranty must reach our headquarters equipped with the indication of the anomaly found and with

the relevant authorization number (RMA form). PANEL, doesn’t carry out any repair of products if this has not been

previously authorized by the company itself.

The transport charges must be borne by the customer.

Customers must collect all the information about the problems encountered and note anything abnormal or, print out

any on-screen messages, and describe the problems at Panel RMA Service. Contact Panel service at: support@panel.it

1.6 Technical Support and Assistance

About technical support and assistance, visit Panel’s website at www.panel.it

www.panel.it 6

Chapter 2: Technical data

2.1 Introduction

The PMG2 industrial monitors are VESA or panel mounting.

The front panel is a tempered IP66 glass supplied with projected capacitive multi-touch screen.

2.2 Products specifications

Models

PMG212

PMG215

PMG216

PMG217

PMG218

PMG222

Technology construction

Capacitive touchscreen

Display size

12.1”

15.0"

15.6"

17.0"

18.5”

21.5"

Resolution

800x600

1024x768

1366x768

1280x1024

1366x768

1920x1080

Brightness

450 cd/m²

500 cd/m²

300 cd/m²

350 cd/m²

300 cd/m²

250 cd/m²

Contrast

700:1

1500:1

500:1

1000:1

Max colors

16.7 Millions

Touchscreen

Projected capacitive

I/O ports

1x VGA 1x DVI 1x USB2.0 (Touch)

Mounting

Panel or VESA 100 mounting

Protection grade

IP 66 (frontal)

Dimensions (WxHxD) mm

335x270x58

390x315x58

430x275x63

455x355x63

500x320x63

579x367x60

Weight

3 Kg

4 Kg

4,5 Kg

5 Kg

7 Kg

7.5 Kg

Rated input voltage

24 VDC / 110-230 VAC

Input voltage limits

16 ….. 27 VDC / 90 ….. 264 VAC

Typical Power

14 W

15 W

16 W

22 W

24 W

Operating Temperature

0° ÷ 50 °C

Conformity

2.3 Bespoke front graphics customization

Optional, provided on request

www.panel.it 7

2.4 Touchscreen specifications

Scope: The specification is for projected capacitive touchscreen

Features

Type: Projected capacitive

Input Mode: Finger

Environmental Characteristics

Operation temperature: -20 °C ~ +70 °C; Humidity 20% RH ~ 85% RH Non Condensing

Storage temperature: -40 °C ~ +80 °C; Humidity 10% RH ~ 90% RH Non Condensing

Optical Characteristics

Transparency: 90% ± 3% (Measured by BYK-Gardner)

Haze: < 2%

Electrical Characteristics

Linearity: X≦1.0%, Y≦1.0%

Insulation: ≧100MΩ/25V(DC)

Response: According to Integration time of controller

Mechanical Characteristics

Total Thickness: 2.45±0.30 mm

Operating force specifications: Finger=≦10g

Impact: 25.0 mm DIA. Steel Ball/67g, height=30 cm, 1 time, impact at center area

Static Load: 5000g within 10cm2area for 30 sec

Hardness: 7H pencil, pressure 750g/45°

Tail peeling: 800g/cm by vertical 90° for 30sec

Reliability

Constant temperature /Humidity: 70°C X 90%RH, 120 hrs and normalized for 4 hrs

Heat cycle: 70°C /120 hrs and normalized for 4 hrs

Cold cycle: -40°C /120 hrs and normalized for 4 hrs

Thermal Cycle: -40°C ~80℃[60 min./cycle] *10 cycles and normalized for 4 hrs

Durability

Knock Test: 100,000,000 times

PSG2 projected capacitive touch controller

Tecnology: allow 10 finger multi-touch

Power Requirements: 3.5V~5.5V typical 5V, 100mA max.

Operating Temperature: -25 to 85 ℃

Storage Temperature: -25 to 85 ℃

Relative Humidity: 95% at 60 ℃, RH Non-condensing

Interface: USB: 1.1 Full Speed

Resolution: 4096×4096 resolution

Report rate: USB: Max. 100 points/sec

Response time: Max. 25 ms

MTBF: 200,000 hrs

www.panel.it 8

2.5 Mechanical dimensions

PMG2 display units with retaining clips

All dimensions are specified in mm

Display size

Model

12.1”projected capacitive touch

PMG212

335

270

28.5

255

312

170

247

15.0” projected capacitive touch

PMG215

390

315

255

367

170

292

15.6”projected capacitive touch

PMG216

430

275

255

407

28.5

170

252

17.0” projected capacitive touch

PMG217

455

355

88.5

255

432

170

332

18.5” projected capacitive touch

PMG218

500

320

111

255

477

28.5

170

297

21.5”projected capacitive touch

PMG222

579

367

150.5

255

556

170

344

www.panel.it 9

2.6 Mechanical cut-out (panel mounting)

All dimensions are specified in mm

The cut-out tolerance values are +1 mm / -1 mm

Display size

Model

Zmin

Zmax

Number of retaining clips

12.1”projected capacitive touch

PMG212

315

250

15.0” projected capacitive touch

PMG215

370

295

15.6”projected capacitive touch

PMG216

410

255

17.0” projected capacitive touch

PMG217

435

335

18.5” projected capacitive touch

PMG218

480

300

21.5”projected capacitive touch

PMG222

559

347

www.panel.it 10

2.7 VESA mounting

VESA: you can attach a commercial-type arm or wall-mount adapter using the arm mounting holes (VESA 100 mm

specification) at the back of this product. Attach the four (4) M4 attachment screws. The torque required for these

screws is 0.7 to 0.8 N/m.

VESA® stands for Video Electronics Standards Association an international non-profit corporation which represents

more than 100 corporate members worldwide, and sets industry-wide interface standards for computing

environments. Panel agreed on the VESA standard, and all his LCD monitors come with the VESA 100 mounting hole

pattern, which means a hole pattern on the back of the monitor: 100mm x 100mm (3.94 x 3.94 inches).

Tabla de contenidos

Otros manuales de Pantalla táctil de panel

panel

panel PSR1-EK Series Manual de usuario

panel

panel PSG2-EM Series Manual de usuario

panel

panel PC PSG2-EN Series Manual de usuario

panel

panel PSR3-EK Series Manual de usuario

panel

panel PSR110-EM Series Manual de usuario

panel

panel PC PSR1-EP Series Manual de usuario

panel

panel PVR-EM Series Manual de usuario

panel

panel PSR3-EM Series Manual de usuario

panel

panel PSR3-EP Series Manual de usuario

panel

panel PSR1-FO Series Manual de usuario

panel

panel PC PSR110-FM Series Manual de usuario

panel

panel PC PSG2-EP Series Manual de usuario

panel

panel PC PSR108-FM Series Manual de usuario

Manuales populares de Pantalla táctil de otras marcas

Elecro Engineering

Elecro Engineering Poolsmart Plus Instrucciones de instalación

Johnson Controls

Johnson Controls IQ4 HUB Manual de usuario

Elo TouchSystems

Elo TouchSystems ET2270L Manual de usuario

Elo TouchSystems

Elo TouchSystems ET1002L Manual de usuario

Elo TouchSystems

Elo TouchSystems 3201L Manual de usuario

Duratec

Duratec S15 Manual de usuario

Crestron

Crestron TPMC-3SM Manual de usuario

Racelogic

Racelogic MFD Touch Manual de usuario

J2 580 Guía del usuario

HAI

HAI OmniTouch 10p Manual de usuario

Tipro

Tipro FREE+ Manual de usuario

Systemline

Systemline Commander Manual de usuario

Interactive Technologies

Interactive Technologies Insite Manual de usuario

GVision

GVision Legacy Manual de usuario

BeiJer

BeiJer T21C-C24 Manual de usuario

Advantech

Advantech ITM-5117 Series Manual de usuario

Edge

Edge CS Manual de usuario

Elo TouchSystems

Elo TouchSystems WALLABY PRO Manual de usuario

panel PMG2 Series Manual de usuario

Manuales populares de Pantalla táctil de otras marcas