Panasonic ET-EMFU330 Manual de usuario
Thank you for purchasing this Panasonic product.
■Please read these operating instructions and the projector operating
instructions carefully, and then use this product correctly.
■Before using this product, be sure to read “Read this rst!” (xpage 3).
■Please save this manual for future use.
DPQX1154ZB
Long Life Filter Unit Commercial Use
Operating Instructions
ENGLISH
Model No. ET-EMFU330
ENGLISH
FRANÇAIS
日本語
2 - ENGLISH
Contents
Contents
Read this rst! 3
Structure of the Long Life Filter Unit 4
Attaching the Long Life Filter Unit 5
Removing the air lter unit 6
Attaching the long life lter mount clasp 8
Attaching the air lter unit 9
Attaching the long life lter cover 10
Setting the lter 10
ENGLISH - 3
Read this rst!
Read this rst!
WARNING:
Do not place the accessories in a location that a child can reach.
Accidentally swallowing them can cause a physical harm.
fSeek a medical advice immediately if a child might have swallowed an
accessory.
CAUTION:
Before attaching the Long Life Filter Unit, be sure to turn o the
power and disconnect the power plug from the wall outlet.
Failure to do so may cause electric shock.
Structure of the Long Life Filter Unit
4 - ENGLISH
Structure of the Long Life Filter
Unit
The Long Life Filter Unit is preassembled at the time of purchase.
It is necessary to disassemble the Long Life Filter Unit while referring to the
procedure in “Attaching the long life lter cover” (xpage 10).
rComponents list
Conrm that the following components are provided. Numbers enclosed in
< > show the number of components.
Air lter unit <2> These components are attached to the long
life lter cover.
This will remove the dirt and dust from the
external air.
Long life lter mount clasp <1> This component is attached to the projector
body.
This is the clasp to attach the long life lter
cover.
Long life lter cover <1> The air lter unit is attached to this
component.
This is the clasp to attach to the projector.
Long life lter cover xing screw <2>
(Knurled head screws)
These are the screws to mount the long life
lter cover to the long life lter mount clasp.
Long life lter mount clasp xing screw <1>
(M4 x 10)
This is the screw to attach the long life lter
mount clasp to the projector body.
Attention
fStore small parts in an appropriate manner, and keep them away from small children.
Attaching the Long Life Filter Unit
ENGLISH - 5
Attaching the Long Life Filter Unit
The Long Life Filter Unit (Model No.: ET‑EMFU330) uses two of the same
standard air lter unit attached to the projector. The interval to perform
maintenance/replacement of lters is extended roughly two times by
attaching the Long Life Filter Unit instead of the standard air lter unit
attached to the projector.
Purchase the Replacement Filter Unit (Model No.: ET‑EMF330) when
replacing the air lter unit.
Attention
fMake sure to turn o the power before removing the standard air lter unit attached to
the projector and attaching the Long Life Filter Unit. Make sure to follow the procedure in
“Switching o the projector” described in the Operating Instructions of the projector when
turning o the power.
fMake sure that the projector is stable, and perform the maintenance in a safe place even if
the lter falls accidentally.
Note
fWhen the Long Life Filter Unit (Model No.: ET‑EMFU330) is attached, the eyebolts for
installation work cannot be attached.
fAll the projector illustrations in this manual are based on the PT‑RZ31K series.
Attaching the Long Life Filter Unit
6 - ENGLISH
Removing the air lter unit
First, remove the standard air lter unit attached to the projector.
Grip on the air filter unit (b)
Grip on the air filter unit (a)
Fig. 5Fig. 4
Fig. 2 Fig. 3Fig. 1
Air filter cover
Air filter unit
Tabs on the projector body (d)
Tabs on the
projector body (c)
Air filter cover fixing screw
Air filter unit compartment and
the projector’s air intake port
1) Turn off the power of the projector, and disconnect the power plug
from the outlet.
fMake sure to follow the procedure in “Switching o the projector”
described in the Operating Instructions of the projector when turning
o the power.
2) Remove the air filter cover.
fUse a Phillips screwdriver to turn the air lter cover xing screw
counterclockwise until it turns freely (Fig. 1), and open the air lter
cover for approximately 90°, and then pull out in the direction of the
arrow. (Fig. 2)
fLoosen the air lter cover xing screw while holding the air lter cover
with your hand.
Attaching the Long Life Filter Unit
ENGLISH - 7
3) Remove the drop-prevention string.
fRemove the hook at the tip of the drop-prevention string attached to
the air lter cover. (Fig. 3)
4) Pull out the air filter unit.
i) Pull out the air filter unit from the tabs on the projector body (c) while
slightly pressing the grip on the air filter unit (a) inward as described with
the arrow. (Fig. 4)
ii) Pull out the air filter unit. (Fig. 5)
fWhen pulling out, conrm that the air lter unit comes o from the tabs
on the projector body (d).
fAfter pulling out the air lter unit, remove large foreign objects and
dust from the air lter unit compartment and the air intake port of the
projector body if there are any.
fWhen the air lter unit is removed, proceed to “Attaching the long life
lter mount clasp” (xpage 8) next.
Attention
fTake care not to touch the radiator n, etc., when removing dirt or dust.
fStore the removed air lter cover in a safe place.
Attaching the Long Life Filter Unit
8 - ENGLISH
Attaching the long life lter mount clasp
Remove the long life lter mount clasp from the preassembled Long Life
Filter Unit while referring to the procedure in “Attaching the long life lter
cover” (xpage 10).
Attach the long life lter mount clasp in the area the standard air lter unit
attached to the projector was removed.
Fig. 3
Fig. 2Fig. 1
Insertion hole
Hook
1) Attach the hook of the drop-prevention string to the long life filter
mount clasp. (Fig. 1)
fAttach the hook on the tip of the drop-prevention string attached to the
projector body to the long life lter mount clasp supplied with the Long
Life Filter Unit at the position indicated in the gure.
2) Attach the long life filter mount clasp to the projector body. (Fig. 2)
fAlign the two hooks of the long life lter mount clasp to the position
of the holes where the air lter cover was inserted, and slide it in the
direction of the arrow.
3) Secure the long life filter mount clasp. (Fig. 3)
fSecurely x with one long life lter mount clasp xing screw (M4 x 10)
supplied with the Long Life Filter Unit.
fWhen the long life lter mount clasp is attached, proceed to “Attaching
the air lter unit” (xpage 9) next.
Attaching the Long Life Filter Unit
ENGLISH - 9
Attaching the air lter unit
Long life filter
cover
Air filter unit
Guide on the long life filter cover (e)
Grip on the air filter unit (a)
Grip on the air filter unit (b)
Guide on the long life filter cover (f)
Air filter unit
Fig. 3
Fig. 2
Fig. 1
Cross section
1) Attach the two air filter units to the long life filter cover. (Fig. 1)
fAttach the two air lter units supplied with the Long Life Filter Unit to
the long life lter cover. The method to attach the two air lter units is
the same.
fAlign the position so that the grips on the air lter unit (a) and (b) will
be outside the guides on the long life lter cover (e) and (f), and push
in the direction of the arrow by holding the outer frame of the air lter
unit. (Fig. 2)
fWhen the two air lter units are attached (Fig. 3), proceed to
“Attaching the long life lter cover” (xpage 10) next.
Note
fMake sure that the air lter unit is properly attached before using the projector. If it is not
attached, the projector will suck in dirt and dust causing a malfunction.
Attaching the Long Life Filter Unit
10 - ENGLISH
Attaching the long life lter cover
Attach the long life lter cover with the air lters to the long life lter mount
clasp on the projector body.
Fig. 2Fig. 1
Long life filter cover fixing screws
1) Attach the long life filter cover to the long life filter mount clasp.
(Fig. 1)
fAttach the long life lter cover (with the two air lter units attached) to
the long life lter mount clasp on the projector body.
fThe long life lter has no dierence between top and bottom.
2) Secure the long life filter cover. (Fig. 2)
fSecurely x with the two long life lter cover xing screws (knurled
head screws) supplied with the Long Life Filter Unit.
fWhen the long life lter cover is secured, proceed to “Setting the lter”
(xpage 10) next.
Setting the lter
Set the type of lter, and then reset the lter runtime (counter numerical
value).
1) Turn on the power of the projector.
2) Press the <MENU> button on the remote control or control panel.
fThe [MAIN MENU] screen is displayed.
3) Press as to select [PROJECTOR SETUP].
4) Press the <ENTER> button.
fThe [PROJECTOR SETUP] screen is displayed.
5) Press as to select [FILTER SETTING].
Tabla de contenidos
Otros manuales de Sistema de filtración de agua de Panasonic
Panasonic
Panasonic TK-AS40 Manual de usuario
Panasonic
Panasonic ET-RFC100 Manual de usuario
Panasonic
Panasonic ET-EMF330 Manual de usuario
Panasonic
Panasonic TK-CS10 Manual de usuario
Panasonic
Panasonic ET-RFV300 Manual de usuario
Panasonic
Panasonic TK-CS10 Manual de usuario
Panasonic
Panasonic TK-CJ21 Manual de usuario
Panasonic
Panasonic ET-RFF200 Manual de usuario
Panasonic
Panasonic TK6305P Manual de usuario
Panasonic
Panasonic PJ-37MRF Manual de usuario
Panasonic
Panasonic ET-EMF510 Manual de usuario
Panasonic
Panasonic ET-RFE200 Manual de usuario
Panasonic
Panasonic ET-EMF100 Manual de usuario
Panasonic
Panasonic ET-RFV200C Manual de usuario
Panasonic
Panasonic ET-RFE200C Manual de usuario
Panasonic
Panasonic MicroClear TK-CS200 Manual de usuario
Panasonic
Panasonic ET-SFR510 Manual de usuario
Panasonic
Panasonic MicroClear4000 Manual de usuario
Panasonic
Panasonic ET-RFV100 Manual de usuario
Panasonic
Panasonic ET-RFF200C Manual de usuario
