Panasonic MC-CG677K-S647 Manual de usuario

rights reserved. Unauthorized copying and distribu-

tion is a violation of law.

Order No.VCB0709029CE

Vacuum Cleaner

Model No.

MC-CG677K-S647

Product Color :Silver

Destination :Singapore

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ----------------------------------------------------- 2

2 Location of Controls and Components ------------------- 3

3 Troubleshooting Guide ----------------------------------------- 5

4 Disassembly and Assembly Instructions ---------------- 6

4.1. Dust box cover assembly removal -------------------- 6

4.2. Separate the upper and lower body units ----------- 7

4.3. Printed circuit board assembly (P.C.B Ass’y)

removal------------------------------------------------------- 7

4.4. Motor removal ---------------------------------------------- 9

4.5. Replacement of the indicator ornamental plate

unit ------------------------------------------------------------ 9

4.6. Replacement of the P.C.B. DU, P.C.B. KU,

and indicator unit -----------------------------------------10

4.7. Cord reel partition unit replacement -----------------11

4.8. Rail base U replacement -------------------------------11

4.9. Spring-loaded cord reel pre-winding-----------------12

4.10. How to disassemble the turbine nozzle ------------12

5 Wiring Connection Diagram ---------------------------------14

6 Exploded View and Replacement Parts List ----------- 15

6.1. EXPLODED VIEW (ATTACHMENTS) -------------- 15

6.2. PARTS LIST (ATTACHMENTS) ---------------------- 16

6.3. EXPLODED VIEW (BODY UNIT)-------------------- 17

6.4. PARTS LIST (BODY UNIT)---------------------------- 18

6.5. PACKING INSTRUCTIONS --------------------------- 19

6.6. PACKING LIST ------------------------------------------- 20

1 Specifications

Model No. MC-CG677K-S647

Power source AC230-240V~50Hz

Input power (MAX) 1400W

Input power (Nominal) 1100-1200W

Power control O

Extension wand Metal telescopic

Turbin nozzle O

Dimensions (WxLxH)mm 280x430x260

Net weight 5.1kg

Cleaning tools Crevice nozzle / Dusting brush

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECKPOINT METHOD OF INSPECTION CAUSE / REMEDY

When dust is vacuumed off, the

dust sensor indicator lamp doesn’t

light up.

Or, it lights up when dust is not

vacuumed off.

With the swivel cap unit set to

“AUTO”, the dust suction power is

not affected

Air inlet Check whether or not dust or for-

eign substances adhere to the dust

sensor of the air inlet.

Wipe the dust sensor with a dry

soft cloth.

If there is no improvement in symp-

toms, then replace the P.C.B AU.

Motor fails to rotate Power supply cord Check power supply cord continu-

ity.

If there is no continuity, replace the

cord reel patition unit.

Fuse of P.C.B. Ass’y

(250V, 10A)

Check fuse continuity. If there is no continuity, replace

P.C.B AU.

Motor continuity Check the conduction between the

terminals of the motor.

If there is no continuity, replace the

motor.

ON/OFF Switch Check continuity across switch

connections

If there is no continuity, replace

P.C.B AU.

Triac (Inside of P.C.B.) Check if there is any problem in the

triac.

(Please refer to how to check the

triac.)

If it has any problem, replace the

P.C.B AU.

P.C.B AU Check the internal parts for any-

thing unusual. (burn-out, melt-

down, etc.)

If anything unusual is found,

replace the P.C.B AU with new one.

Motor runs but there is no suction Hose or Suction inlet Check if there is any blockage in

the hose or suction inlet.

If there is any blockage, remove it.

Dust bag / Secondary filter Check if dust bag is full or Second-

ary filter is choked up.

If dust bag is full, replace with a

new one. If Secondary filter is

choked up, remove and clean it out

or replace.

Noise or vibration Motor fan Check dust accumulated in motor

fan (it could happen if the vacuum

cleaner has been used without cen-

tral filter).

If there is accumulated dust in the

motor fan, replace the motor and

check filter condition. (never try to

dismantle the motor fan)

Motor does not change power

(runs always at full speed)

Power control

(Control)

Adjust the power control and check

whether or not the resistance var-

ies. (Black←→Red)

If the resistance does not vary, then

replace the Control.

P.C.B AU Examine the triac in the P.C.B AU

and check whether or not T1 and

T2 are short-circuited.

If they are short-circuited, then

replace the P.C.B AU.

Motor runs irregularly P.C.B AU Check possible bad contact of

P.C.B AU.

Replace P.C.B AU.

4 Disassembly and Assembly Instructions

Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner.

Remove the power plug from the outlet.

4.1. Dust box cover assembly

removal

1. Open the dust box and remove the lead wire cover.

2. When removing the lead wire cover, use a flat-blade

screwdriver as an aid.

3. Remove the connectors from the lead wire AU and P.C.B.

DU.

4. Open the dust box lid assy at an angle of approximately

45 degrees and insert an flat-blade screwdriver into a gap

between the upper body and the dust box lid assy. Move

the screwdriver in the direction of the arrow to remove the

left fitting section of the dust box lid assy.

4.2. Separate the upper and lower

body units

1. Remove the five screws fixing the upper body U and

lower body U.

2. Remove the screw fixing the upper body U from the rear

side.

3. Lift the upper body U to separate it from the lower body U.

4.3. Printed circuit board assembly

(P.C.B Ass’y) removal

1. Remove the Swivel cap unit.

2. Remove the Insulation plate

3. Wiring illustration

4. Remove the P.C.B. Ass'y from the P.C.B. holder.

* When removing the P.C.B Ass’y, widen the frame of

the P.C.B holder, and then remove the P.C.B from the

hook of the P.C.B holder.

Note: When removing the P.C.B. assy, do not bend it

to prevent damage and the wires from breaking.

5. Remove the fastening terminal of the lead wire from cord

reel partition U connected to the printed circuit board and

that of the lead wire from the motor.

* Note: When removing the fastening terminal of the

lead wire, please hold the terminal fixed to the printed

circuit board to prevent an excessive load from being

applied to it.

6. Remove the Control and Lead wiire BU.

7. Remove the two screws fixing the P.C.B. holder and pull it

out from the lower body U.

4.4. Motor removal

1. Lift the motor section from the lower body U.

2. Remove the components fitted to the motor.

a. Remove the thermal protector.

b. Remove the motor support rubber (rear).

c. Remove the motor support.

d. Remove the lead wires connected to the motor.

e. Remove the noise suppressor.

f. Remove the motor support rubber (front).

* Note: When the thermal protector has been

replaced, make sure to paste the tape (gasket V) back

on the terminals.

4.5. Replacement of the indicator

ornamental plate unit

1. Remove the three screws fixing the air inlet guide on the

rear of the dust box lid assy.

2. Hook off the two fixing tabs on the indicator ornamental

plate unit with a flat-blade screwdriver.

3. Turn it over to remove the indicator ornamental plate unit.

4.6. Replacement of the P.C.B. DU,

P.C.B. KU, and indicator unit

1. Remove air inlet packing A.

2. Remove the indicator unit.

3. Remove the P.C.B. KU.

4. Remove the air inlet guide U and then remove the lead

wire AU from the P.C.B. DU.

5. Remove the P.C.B. DU from the air inlet guide tabs.

Tabla de contenidos

Otros manuales de Aspiradora de Panasonic

Panasonic

Panasonic MCV7515 - UPRIGHT VACUUM Manual de usuario

Panasonic

Panasonic Quickdraw MC-V7522 Manual de usuario

Panasonic

Panasonic MCV5320 - UPRIGHT VACUUM-QKDR Manual de usuario

Panasonic

Panasonic MC-CG475K Manual de usuario

Panasonic

Panasonic MC-CL565 Manual de usuario

Panasonic

Panasonic MCV5257 - UPRIGHT VACUUM Manual de usuario

Panasonic

Panasonic MCUG773 - UPRIGHT VACUUM - MULTI LANGUAGE Manual de usuario

Panasonic

Panasonic MC-YL798 Manual de usuario

Panasonic

Panasonic MC-V5005 Manual de usuario

Panasonic

Panasonic MC-CG937 Manual de usuario

Panasonic

Panasonic MC-CG383-RC79 Manual de usuario

Panasonic

Panasonic EY3743B57 Manual de usuario

Panasonic

Panasonic mc-ul592 Manual de usuario

Panasonic

Panasonic MC-CG525R747-KW Manual de usuario

Panasonic

Panasonic MC-CL675-ZC79 Manual de usuario

Panasonic

Panasonic MC-CG711 Manual de usuario

Panasonic

Panasonic Ultra-Pro MC-V150 Manual de usuario

Panasonic

Panasonic MCV9638 - CANISTER VAC.-PLAT Manual de usuario

Panasonic

Panasonic MC-9040 Manual de usuario

Panasonic

Panasonic MC-SBV01 Manual de usuario

Panasonic

Panasonic MC-GG213 Manual de usuario

Panasonic

Panasonic MC-UG223 Manual de usuario

Panasonic

Panasonic MCV325 - COMMERCIAL VACUUM Manual de usuario

Panasonic

Panasonic MC-CG973-00 Manual de usuario

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

LG A9 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario

Nobles

Nobles 608669 Manual del producto