Panasonic P2 AJ-PCD30P Manual de usuario

Operating Instructions

Memory Card Drive

Model No.AJ-PCD30P

Model No.AJ-PCD30E

Before operating this product, please read the instructions carefully, and save this

manual for future use.

SS0611AK3033 -FJ

Printed in Japan VQT3R23-2

ENGLISH

AJ-PCD30P_E-VQT3R23-2_E.book 1 ページ２０１３年３月６日　水曜日　午後６時１分

Read this first!

For AJ-PCD30P and AJ-PCD30E

indicates safety information.

WARNING:

This apparatus must be earthed.

To ensure safe operation the three-pin plug must be inserted only into a standard three-pin

power point which is effectively earthed through the normal house-hold wiring.

Extension cords used with the equipment must be three-core and be correctly wired to provide

connection to earth. Wrongly wired extension cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily does not imply that the power point is

earthed and that the installation is completely safe. For your safety, if in any doubt about the

effective earthing of the power point, consult a qualified electrician.

WARNING:

zTo reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.

zTo reduce the risk of fire or electric shock, keep this equipment away from all liquids. Use

and store only in locations which are not exposed to the risk of dripping or splashing liquids,

and do not place any liquid containers on top of the equipment.

WARNING:

Always keep accessories (rubber feet, mounting screws) out of the reach of babies and small

children.

CAUTION:

To reduce the risk of fire or electric shock and annoying interference, use the recommended

accessories only.

CAUTION:

The mains plug of the power supply cord shall remain readily operable.

The AC receptacle (mains socket outlet) shall be installed near the equipment and shall be

easily accessible.

To completely disconnect this equipment from the AC mains, disconnect the mains plug from

the AC receptacle.

AJ-PCD30P_E-VQT3R23-2_E.book 2 ページ２０１３年３月６日　水曜日　午後６時１分

Read this first! (continue)

For AJ-PCD30P indicates safety information.

Notice (U.S.A. only):

Disposal may be regulated in your community due to Environmental considerations.

For disposal or recycling information, please visit Panasonic website:

http://www.panasonic.com/environmental or call 1-888-769-0149.

FCC NOTICE

NOTIFICATION (Canada)

Declaration of Conformity

Model Number: AJ-PCD30P

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus,

NJ 07094

Support contact: 1-800-524-1448

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make

any unauthorized modifications.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of

the following measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

zConsult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC local

regional offices helpful.

FCC Warning: To assure continued FCC emission limit compliance, follow the attached

installation instructions and the user must use only shielded interface cables when connecting

to host computer or peripheral devices. Also, any unauthorized changes or modifications to

this equipment could void the user’s authority to operate this device.

This class B digital apparatus complies with Canadian ICES-003.

AJ-PCD30P_E-VQT3R23-2_E.book 3 ページ２０１３年３月６日　水曜日　午後６時１分

Read this first! (continue)

For AJ-PCD30E

indicates safety information.

EEE Yönetmeliğine Uygundur.

EEE Complies with Directive of Turkey.

Manufactured by: Panasonic Corporation, Osaka, Japan

Importer’s name and address of pursuant to EU rules:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Caution for AC Mains Lead

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This product is equipped with 2 types of AC mains cable. One is for continental Europe, etc. and

the other one is only for U.K.

Appropriate mains cable must be used in each local area, since the other type of mains cable is

not suitable.

FOR CONTINENTAL EUROPE, ETC.

Not to be used in the U.K.

FOR U.K. ONLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 13 amp fuse is fitted in this plug.

Should the fuse need to be replaced

please ensure that the replacement fuse

has a rating of 13 amps and that it is

approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI

mark on the body of the fuse.

If the plug contains a removable fuse

cover you must ensure that it is refitted

when the fuse is replaced.

If you lose the fuse cover the plug must not

be used until a replacement cover is

obtained.

A replacement fuse cover can be

purchased from your local Panasonic

Dealer.

How to replace the fuse

1 Open the fuse compartment with a

screwdriver.

2 Replace the fuse.

Fuse

AJ-PCD30P_E-VQT3R23-2_E.book 4 ページ２０１３年３月６日　水曜日　午後６時１分

Table of Contents

Read this first! . . . . . . . . . . . . . . . . . . 2

Before Use . . . . . . . . . . . . . . . . . . . . . . 6

Overview. . . . . . . . . . . . . . . . . . . . . . . . 6

Features . . . . . . . . . . . . . . . . . . . . . . . . 6

Supplied Accessories

(AJ-PCD30P/AJ-PCD30E) . . . . . . . . . . 7

Operating Environment

Required for Installation . . . . . . . . . . . 7

Parts and their Functions . . . . . . . . . . 8

Front Panel . . . . . . . . . . . . . . . . . . . . 8

Rear Panel . . . . . . . . . . . . . . . . . . . . 8

Inserting a P2 Card . . . . . . . . . . . . . . . 9

Removing a P2 Card . . . . . . . . . . . . . . 9

Write-protection of P2 Card . . . . . . . 10

Power management function

(automatic switch-off function) . . . . 10

Installation . . . . . . . . . . . . . . . . . . . . . 10

To Connect the device to a Personal

Computer for External Use . . . . . . . 11

Disconnect externally connected

devices from your PC . . . . . . . . . . . 13

To Mount the device in a Personal

Computer 5-type Bay . . . . . . . . . . . 14

P2 USB Driver . . . . . . . . . . . . . . . . . . 16

Installing the P2 USB Driver for

Windows . . . . . . . . . . . . . . . . . . . . . 16

Installing the P2 USB Driver for

Macintosh . . . . . . . . . . . . . . . . . . . . 16

Uninstallation . . . . . . . . . . . . . . . . . 16

Overview of dedicated software . . . 17

Power management setting

(Windows/Macintosh) . . . . . . . . . . . 17

Installation . . . . . . . . . . . . . . . . . . . 17

Uninstallation . . . . . . . . . . . . . . . . . 17

Starting up and shutting down

the Power Management Setting

Software . . . . . . . . . . . . . . . . . . . . . 17

Power Management Setting

Software window . . . . . . . . . . . . . . 18

P2 Drive internal setting

(Windows) . . . . . . . . . . . . . . . . . . . . 19

P2 Drive internal setting . . . . . . . . . 19

Canceling P2 drive internal

setting . . . . . . . . . . . . . . . . . . . . . . . 19

Troubleshooting . . . . . . . . . . . . . . . . 20

Specifications . . . . . . . . . . . . . . . . . . 21

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States.

Macintosh, Mac and Mac OS are registered trademarks of Apple Inc. of the United States.

Other names of companies and products are trademarks or registered trademarks of the respective

companies.

zIn these instructions, Microsoft®Windows®, Windows®XP Professional, Windows®7

Professional, Windows®7 Ultimate, and Windows®8 are referred to as “Windows”, “Windows XP

Professional”, “Windows 7 Professional”, “Windows 7 Ultimate”, and “Windows 8”, respectively.

zSimilarly, in these instructions, Macintosh®, Mac®Pro and Mac OS®X are referred to as

“Macintosh”, “Mac Pro” and “Mac OS X” respectively.

zIn these instructions, a P2 card and memory card adapter (AJ-P2AD1) are collectively referred to

as “P2 card”.

AJ-PCD30P_E-VQT3R23-2_E.book 5 ページ２０１３年３月６日　水曜日　午後６時１分

Before Use

zWhile AJ-PCD30 (referred to below as “the

device”) is connected to the personal

computer, install the required drivers from the

CD-ROM.

For details, refer to the installation manual in

the Manuals folder on the CD-ROM and “P2

USB Driver” (page 16) in this manual.

zThe device may become warm during use, but

this is not a malfunction.

zWhen the device is used internally, it may be

necessary to connect the device with part of

the USB cable passing outside your PC. In this

case, be sure sufficient space behind the PC

that is to contain the device.

Overview

The device is a P2 card-dedicated data transfer device with a USB 3.0 interface and a 3 slot drive for

writing and reading P2 content to and from P2 cards using the USB 3.0/2.0 connection in a Windows

PC or Macintosh.

The device is capable of making high-speed transfers of clip data shot with a memory card camera

recorder for P2 cards to a personal computer (Windows/Macintosh).

This device supports not only the transferring and copying of clips recorded on P2 cards, but also direct

editing.

Features

zIt is capable of high speed data transfer of

over 1.5 Gbps*1.

zIt can be used as either an external or an

internal drive. (only Windows)

zSupports both Windows and Macintosh

operating systems.

zThe device can also be connected to a

USB 2.0 Windows PC/Macintosh.

zUp to 2 devices may be connected to a single

PC.*2 *3

zA memory card adapter (AJ-P2AD1) can be

used.

This feature is supported with firmware

version 2.00 or later of the device.

For the latest information on firmware, visit

the following Web site.

http://pro-av.panasonic.net/

*1 This is the transfer speed using the multiple P2 card E series over the USB 3.0 connection.This will vary according

to conditions such as the type of file being transferred, the system, the application software, and the version and

the number of the P2 card.

*2 Connect the USB terminal of the device to your computer using the PC USB port. If the USB terminal of the device

is connected to a USB terminal hub then errors may occur, such as the computer not recognizing the device, or not

applying the necessary drivers. (We cannot guarantee proper operation of the device when connected to a USB hub.)

*3 When using a Macintosh with 2 of the devices connected, or with the device and at least two other P2 drive

connected, avoid duplication among the volume labels of the P2 cards.

Correct operation cannot be guaranteed if the volume labels are duplicated or left without being set (“NO NAME”is

displayed).

AJ-PCD30P_E-VQT3R23-2_E.book 6 ページ２０１３年３月６日　水曜日　午後６時１分

Supplied Accessories

(AJ-PCD30P/AJ-PCD30E)

Operating Environment Required for

Installation

To operate the device, the following environment is required on the host computer.

zUSB 3.0 port/USB 2.0 port

The device can be used with a host computer (Windows PC) that does not have a built in USB 3.0 port

by installing a USB 3.0 expansion interface port. Note, however, that Panasonic cannot guarantee

correct operation with all third-party USB 3.0 expansion interface ports.

Recommended USB 3.0 expansion interface ports are listed on the Panasonic website.

http://pro-av.panasonic.net/

The following environment is recommended for the host computer to make full use of the features of the

device.

zA striping configuration using 4 or more hard disk drives is recommended to attain sufficient transfer

speed when transferring data to the hard disk drive.

AC adaptor Bracket

（page 14）

Mounting

screws

(8)

Power cable for AC adaptor CD-ROM

zOperating Instructions (PDF)

zP2 Software

zPower Management Setting Software

Rubber

feet (4)

For AJ-PCD30P

For AJ-PCD30E

(U.K.)

For AJ-PCD30E

(continental Europe,etc.)

AJ-PCD30P_E-VQT3R23-2_E.book 7 ページ２０１３年３月６日　水曜日　午後６時１分

Parts and their Functions

Front Panel

(1) Power button

Use this button to turn the unit ON and OFF.

When the power is OFF, pressing the power

button switches the power ON. When the

power is ON, pressing the power button for

two seconds or more switches the power

OFF.

<Note>

When the device is located internally, the

device power system is linked to the power

system of your PC and the power switches

on without pressing the power button on the

device.

Caution: Do not switch off the power while

the P2 card is being accessed.

(2) Power Indicator

This indicator lights up in green when the

device is running.

(3) Status Indicator

This indicator lights up in green during

access to a P2 card.

<Note>

Do not remove the P2 card during access of

the card, otherwise files may be corrupted, or

the P2 card may fail.

(4) Card Slots

The device is designed for P2 cards and

does not work with other cards.

(5) EJECT button

Press this button to remove a P2 card from

the device.

Rear Panel

The picture shows the rear panel with its cover

removed.

(1) USB 3.0 connector (Type B)

This connects a USB cable.

Use a USB cable (shielded) compliant with

USB 3.0/USB 2.0.

<Note>

The device is only compatible with USB 3.0/

USB 2.0. It is not compatible with USB 1.1.

(2) DC IN 12 V Socket

To use the device mounted in a personal

computer, connect one of the power supply

connectors inside the personal computer to

this socket. (page 15)

Do NOT supply power to both the DC IN

12 V socket and DC IN 16 V socket at the

same time.

(3) DC IN 16 V Socket

For external use of the device, connect an

AC adaptor to this socket.

(4) Cable Clamp

Use this clamp to secure the AC adaptor

cable when connecting the device to a

personal computer for external use of the

Drive.

(5) Antitheft Lock

A commercially available antitheft cable can

be connected to this lock.

(1)

(3) (4)

(2)

(5)

(1)(3) (2)(4)(5)

AJ-PCD30P_E-VQT3R23-2_E.book 8 ページ２０１３年３月６日　水曜日　午後６時１分

Inserting a P2 Card

1Insert the P2 card into one of the card slots.

Press in the card until the EJECT button

pops up.

<Notes>

zBe sure to insert the P2 card horizontally.

Forcing the card in at an angle may

damage it.

zDo not remove a P2 card while it is being

accessed or right after insertion.

Otherwise, the card may be damaged.

2Fold the EJECT button in the direction of the

arrow.

<Note>

Do not use the device with the EJECT button

fully extended.

This may result in the unintentional ejection

of the P2 card or a fault in the EJECT button.

Removing a P2 Card

1Flip up the EJECT button in the direction of

the arrow.

2Press the EJECT button.

The P2 card will slide out far enough to allow

you to remove it.

<Notes>

zTo remove a P2 card on a Macintosh, drag the

P2 card icon to the Trash. Then check that the

icon has disappeared and the access indicator

on the device has turned off before physically

removing the P2 card.

zDo not remove a P2 card that is being

accessed. Removing a P2 card during access

may cause the device to malfunction.

AJ-PCD30P_E-VQT3R23-2_E.book 9 ページ２０１３年３月６日　水曜日　午後６時１分

Write-protection of P2 Card

A P2 card has a write-protect switch. Setting this

switch to “PROTECT” can prevent writing and

deleting of data.

Note: The write-protect switch is not effective

when the P2 card is inserted in the device.

Make sure you remove the P2 card from the

device, set the switch, then re-insert the card, in

order to effect the switch setting.

To prevent the writing and deleting of data when

using a memory card adapter (AJ-P2AD1), set

the memory card write-protect switch on the

adapter.

Power management function

(automatic switch-off function)

zWhen the device is used externally, the power

will switch off automatically after four hours if

no access is made to the P2 cards for reading,

writing etc. To use, switch the power on again.

zWhen the device is used internally, the

automatic switch-off function for power

management is disabled.

<Note>

You can use the Power Management Setting

Software to set the time after which the power is

automatically switched off.

Select from among Off/1 hour/2 hours/4 hours/

8 hours. The default setting at shipping is

4 hours. (page 17)

Caution: If the designated amount of time has

passed, the device will automatically power off

even if you have a file open at the time. If that

happens, the file system may be damaged.

Handle your files carefully.

Installation

There are two ways to connect the device to a personal computer (Windows/Macintosh):

1 Using the device as an external drive connected to a personal computer (Windows/Macintosh)

2 Mounting the device in a 5-type bay of a desktop personal computer (Windows)

PROTECT

Setting the write-

protect switch to

“PROTECT” can

prevent writing and

deleting of data.

Setting the write-

protect switch to this

side allows writing

and deleting of data.

Write-protect

switch

AJ-PCD30P_E-VQT3R23-2_E.book 10 ページ２０１３年３月６日　水曜日　午後６時１分

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Panasonic

Panasonic

Panasonic JU-455-5 Manual de usuario

Panasonic

Panasonic WJHDE300 - DIGITAL DISK RECORDER Manual de usuario

Panasonic

Panasonic RP-SMGT64GAK Manual de usuario

Panasonic

Panasonic KX-FB40 Manual de usuario

Panasonic

Panasonic RP-SDRC16GAK Manual de usuario

Panasonic

Panasonic RP-SDY16GE1K Manual de usuario

Panasonic

Panasonic AG-MSU10 Manual de usuario

Panasonic

Panasonic RP-SDQ32GE1K Manual de usuario

Panasonic

Panasonic RP-SMGT128AK Manual de usuario

Panasonic

Panasonic RP-SDW64GE1K Manual de usuario

Panasonic

Panasonic EverVolt Mini EVAC-105-2 Manual de usuario

Panasonic

Panasonic RP-SDRC08GAK Manual de usuario

Panasonic

Panasonic UB-5335 Manual de usuario

Panasonic

Panasonic RP-SDN16GU1A Manual de usuario

Panasonic

Panasonic CFVHD7220 - SECOND HARD DRIVE DISC/LPTP Manual de usuario

Panasonic

Panasonic JU-253-T Manual de usuario

Panasonic

Panasonic KX-TDA5920 Manual

Panasonic

Panasonic LB-DH7 Series Manual

Panasonic

Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet Manual de usuario

Panasonic

Panasonic KX-NCPS01 Manual de usuario

Panasonic

Panasonic RP-SDUT128AK Manual de usuario

Panasonic

Panasonic RP-SDUB16GAK Manual de usuario

Panasonic

Panasonic RP-SDZA64GAK Manual de usuario

Panasonic

Panasonic CF-VFS721W Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario

Dell

Dell PowerVault MD3600f Series Manual de usuario

CFI

CFI TERA STOR SATA RAID IV Manual de usuario