Panasonic EBL128 Manual de usuario

PANASONIC FIRE ALARM SOLUTIONS

DAILY USER´S MANUAL

EBL128 VERSION 2.2.X

DOCUMENT INFORMATION

DOCUMENT NAME:

DAILY USER´S MANUAL –EBL128 VERSION 2.2.X

DOCUMENT NUMBER:

MEW01786

DATE OF ISSUE:

2015-01-19

REVISION

DATE OF REVISION:

2015-03-30

TABLE OF CONTENTS

1. INTRODUCTION............................................................................................................ 3

2. DESCRIPTION OF THE FRONT.................................................................................... 4

2.1. LED INDICATORS......................................................................................................................... 5

2.2. PUSH BUTTONS........................................................................................................................... 6

2.3. DISPLAY........................................................................................................................................ 6

3. ACCESS LEVELS.......................................................................................................... 7

4. LOG ON TO THE CONTROL UNIT (C.I.E.) ................................................................... 7

4.1. HOW TO LOG ON ......................................................................................................................... 7

5. NAVIGATION / GENERAL PROCEDURES ................................................................... 8

6. PERFORM MONTHLY TEST (H1)................................................................................. 9

7. DISABLE OR RE-ENABLE (H2)................................................................................... 10

7.1. SUB MENU LIST (B1 –B11)........................................................................................................ 10

8. SET CALENDER AND CLOCK (H3) ............................................................................ 12

9. PRESENT SYSTEM STATUS (H4).............................................................................. 13

9.1. SUB MENU LIST (U1 –U8) ......................................................................................................... 13

10. FAULT ACKNOWLEDGE (H6) ................................................................................. 14

11. PERFORM ZONE TEST (H7) ................................................................................... 15

12. INTERLOCKING OUTPUTS AND INPUTS (H9)....................................................... 16

12.1. SUB MENU LIST (C1 –C5) ......................................................................................................... 16

13. CHANGE PASSWORD (H10)................................................................................... 16

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

1. INTRODUCTION

This document is intended to be used for the daily duties like disablements / re-enablements, zone tests,

and so on in the EBL128 system.

Due to continual development and improvement different S/W versions can be found. This document is

valid for EBL128 S/W version 2.2.x.

The document describes the main menus and the sub menus valid for access level "Building officer".

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

2. DESCRIPTION OF THE FRONT

YYYY-MM-DD *** EBL128 *** hh:mm [i]

User programmable information text.

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

2.1. LED INDICATORS

See reference picture on page 4.

Fire

Fire alarms.

Alarms queued

More than one alarm point / zone have activated fire alarm.

Extinguishing

Output(s) for extinguishing equipment activated.

Ventilation

Output(s) for fire/smoke ventilation equipment activated.

Fire brigade tx

Output "Fire alarm" for fire brigade tx (routing equipment) activated.

Operation

The c.i.e. is powered via the rectifier and/or the battery.

General fault

Fault(s) in the system.

Disablements

Disablement(s) in the system.

Fault tx activated

Not acknowledged fault(s):

Output "Fault condition" for fault tx (routing equipment) is activated.

Sevice

One or more sensors have reached the service level. See menu H4/U4.

Alarm devices

Steady light: Output(s) type "Alarm device" are disabled.

Flashing light: Output(s) type "Alarm device" have generated fault(s).

Fire brigade tx

Steady light: Output(s) for "Routing equipment" disabled via menu H2/B3 or

B9 or via open door.

Flashing light: Routing equipment power supply outputs or supervised

outputs of type "Routing equipment" have generated fault(s) or the c.i.e.

has lost contact with these outputs.

System fault

EBL128 is not running because of:

S/W fault

CPU fault

Memory fault

C.i.e. restart (fault code ≠ 00 / 03).

Fire brigade tx delay

The Alert Annunciation function is enabled.

Test mode

Zones are in "test mode".

Door open

The door is open in the EBL 128 or an external FBP in the system.

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

2.2. PUSH BUTTONS

See reference picture on page 4.

Fault acknowledge

Used to acknowledge the faults shown in menu H6. Also used to

acknowledge SERVICE signal, see menu H8/S4.

Paper feed

Not used in EBL128.

Access

Used to log on and get access to the menu.

Return

Used to stop input of data, leave a menu ("one step up") and to log off.

Used to clear /delete just written data.

Key pad

Numeric key pad for the digits 0-9.

Used to accept / select a menu or input of data.

Left / right keys

Used to move the cursor in a menu.

Up / down keys

Used to scroll between the menus.

Alarms queued

Used when LEDs "Alarms queued" are lit. Scroll through the queued alarm

points or zone addresses.

Evacuate / Test LED

Used to activate all the sounders or test LED. (Option, only available for

some countries and conventions.)

Reset

Used to reset the fire alarms. Has to be pressed for > 0.5 sec.

Silence Alarm devices

Used to silence the alarm devices.

May be configured to disable alarm devices.

Silence buzzer

Used to silence the buzzer in the EBL 128 when it is sounding.

2.3. DISPLAY

See reference picture on page 4.

Display

This is the information the display will show in normal operation state.

The user programmable information text is created via EBLWin.

In normal operation and in quiescent state, the LCD-backlight will

be turned off.

As soon as any other information is shown in the display, the

backlight is turned on.

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

3. ACCESS LEVELS

INFORMATION ONLY

BUILDING OFFICER

SERVICE PERSONNEL

H4 Present system status

H1 Perform monthly test

H6 Display faults

H2 Disable or re-enable

H9 Interlocking outputs and inputs

H3 Set calendar and clock

H10 Change password

H4 Present system status

H6 Fault acknowledge

H5 Service

H7 Perform zone test

H6 FAULT Acknowledge

H9 Interlocking outputs and inputs

H7 Perform zone test

H10 Change password

H8 Maintenance

H9 Interlocking outputs and inputs

Described in this document

H10 Change password

4. LOG ON TO THE CONTROL UNIT (C.I.E.)

USER NAME

Up to ten users, 0 to 9 may be programmed. By default at delivery, three users are available:

0 = Information only

1 = Building officer

2 = Service personnel

PASSWORD

Each user has a password for an access level, for example. "Information only", "Building officer" or "Service

personnel".

4.1. HOW TO LOG ON

a) Open the door. Press the button “Access”.

b) On the keypad, press 0, 1, 2 - - 8 or 9 to select a user. Press “A”.

c) Type the password for that user. (Six digits. * * * * * *)

After typing a correct password, the first option of the available menus will be displayed. This is a list in

which you can scroll.

For "0", Information only, no password is required.

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

5. NAVIGATION / GENERAL PROCEDURES

Scroll in lists or menus with .

Press to toggle between different choices.

The letter 'L' in the lower right corner indicates that this is list in which you can scroll with .

Press “A” to select / accept.

Press the digits on the numeric pad to choose a menu or enter data.

If an operation is completed successfully, the display will normally show a message, for example

"Output xx disabled".

If an operation has failed, the information will be "Operation failed".

To leave a menu and step upward in the menu system, press “Return”.

To logout, close the door.

DAILY USER´S MANUAL •EBL128 VERSION 2.2.X •DOCUMENT NUMBER: MEW01786 •REVISION: 1

6. PERFORM MONTHLY TEST (H1)

a) Log on to the c.i.e.

b) Press “A”.

c) Check that all LEDs light up.

d) Press “A”. The c.i.e. buzzer sounds, all the dots in the display are shown and all LEDs on the front

are turned on.

e) Press “A”. Up to four zones can be set in test mode. Use the keypad to type the zone numbers.

f) Press “A”.

g) Perform the test.

h) To end the test, press “A”.

If the routing equipment shall not be tested, the monthly test is completed. Press “A”.

If the routing equipment shall be tested,press “1”. To start the test press "A".

Started test is indicated by LED "Fault tx activated" and after 30 seconds also LED "Fire brigade tx".

After 60 seconds in total, the routing equipment test is ended and the LEDs are turned off. Press "A".

Otros manuales para EBL128

Tabla de contenidos

Otros manuales de Detector de humo de Panasonic

Panasonic

Panasonic 3378 Manual de usuario

Panasonic

Panasonic 3309 Manual de usuario

Panasonic

Panasonic EBL128 Manual de usuario

Panasonic

Panasonic 6362 Manual de usuario

Panasonic

Panasonic EBL512 G3 5000 Manual de usuario

Panasonic

Panasonic 4375 Manual de usuario

Panasonic

Panasonic 3312F Manual de usuario

Panasonic

Panasonic EBL512 Manual de usuario

Panasonic

Panasonic 1828 Manual de usuario

Panasonic

Panasonic 3339 Manual de usuario

Panasonic

Panasonic 1740 Manual de usuario

Panasonic

Panasonic 1735 Manual de usuario

Panasonic

Panasonic 3333 Manual de usuario

Panasonic

Panasonic 3377 Manual de usuario

Panasonic

Panasonic EBL512 Manual de usuario

Panasonic

Panasonic EBL512 Manual de usuario

Panasonic

Panasonic 6363 Manual de usuario

Panasonic

Panasonic 4313 Manual de usuario

Panasonic

Panasonic 1826 Manual de usuario

Panasonic

Panasonic 6295 Manual de usuario

Panasonic

Panasonic Units for Hazardous Manual del propietario

Panasonic

Panasonic MEW01 351 Manual técnico

Panasonic

Panasonic 2217 Manual de usuario

Panasonic

Panasonic 6367 Manual de usuario

Manuales populares de Detector de humo de otras marcas

x-sense

x-sense SD19-W Manual de usuario

BRK electronic

BRK electronic First Alert P1010 Manual de usuario

FireAngel

FireAngel Thermoptek ST-622 Manual de usuario

teko

teko Astra-42A Manual de usuario

Safetec

Safetec SDS-2/6 Manual del propietario

Siemens

Siemens PE-11C Manual de usuario

System Sensor

System Sensor DH500ACDC Manual de usuario

Resolution Products

Resolution Products RE612 CryptiX Manual de usuario

First Alert

First Alert PC900V Manual de usuario

Eminent

Eminent EM6590 E-Domotica Manual de usuario

Ei Electronics

Ei Electronics Ei Ei168RC Manual de usuario

Carrier

Carrier Kidde Quell Q301 Manual de usuario

VESDA

VESDA VLF-500 Manual de usuario

ELRO

ELRO FS8110 Manual de usuario

Heiman

Heiman SMOKI NS-626PHS Manual de usuario

Regin

Regin SDD-S65 Manual de usuario

Family Gard

Family Gard FG225 Manual de usuario

Greystone

Greystone DSD120 Manual de usuario