Panasonic WV-NS950 series Manual

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Network Camera

Setup Instructions

Model Nos. WV-NS950, WV-NS954

WV-NW960, WV-NW964

WV-NS950

WV-NS954

WV-NW960

WV-NW964

CONTENTS

Preface ............................................................................................................................ 3

About these operating instructions .............................................................................. 3

Trademarks and registered trademarks ...................................................................... 3

Viewer software ........................................................................................................... 3

Display the setup menu and configure the settings of the camera using a PC ............... 4

How to display the setup menu ................................................................................... 4

How to operate the setup menu .................................................................................. 5

Configure the basic settings of the camera [Basic setup] ........................................... 8

Configure the settings relating to images and audio [Camera setup] ......................... 20

Configures the multi-screen settings [Multi-screen setup] .......................................... 37

Configure the alarm settings [Alarm setup] ................................................................. 38

Set the VMD areas [VMD area] ................................................................................... 43

Configure the settings relating to the authentication [Authentication setup] ............... 49

Configure the settings of the servers [Server setup] ................................................... 51

Configuring the network settings [Network setup] ....................................................... 53

Configure the settings relating to the schedules [Schedule setup] ............................. 61

Maintenance of the camera [Maintenance] ................................................................. 62

Viewing Help ...................................................................................................................65

Displaying the Help screen ......................................................................................... 65

About the displayed system log ....................................................................................... 66

Troubleshooting ............................................................................................................... 68

Directory structure of drive B............................................................................................ 75

Setting example of the router ........................................................................................... 76

Preface

About these operating instructions

There are 3 sets of operating instructions for the WV-NS950/NS954, WV-NW960/NW964 as follows.

• Installation Guide

• Operating instructions

• Setup Instructions

• WV-NS950/NS954 Network camera (for indoor use) (hereinafter WV-NS950 series)

• WV-NW960/NW964 Network camera (for outdoor use) (hereinafter WV-NW960 series)

These Setup Instructions contain descriptions of how to operate this product* using a PC via a network and of how

to configure the settings.

* The screens used in these Setup Instructions show the case of WV-NS954.

Refer to the installation guide for descriptions of how to install this product and of how to connect to a network.

Adobe®Reader is required to read PDF. When the Adobe®Reader is not installed on the PC, download the latest

Adobe®Reader from the Adobe web site and install it.

Trademarks and registered trademarks

• Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX and DirectX are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

• SD logo is a trademark.

• Mini SD is a trademark.

• Other names of companies and product contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

Viewer software

• Images will not be displayed when the viewer software "Network camera View3" is not installed on the PC. This

software can be installed directly from the camera or by double clicking "nwcv3setup.exe" on the CD-ROM pro-

vided, and then following the on-screen instructions.

Important:

• The default setting of "Automatic installation of Viewer

software" is "ON". Follow the instructions on page 74

when the message is displayed on the information bar of

the browser.

• When the "Live" page is displayed for the first time, the

install wizard of the ActiveX control required to display

images from the camera will be displayed.

Follow the instructions of the wizard.

• When the install wizard is displayed again even after

completing the installation of the ActiveX, restart the PC.

• The viewer software used on each PC should be licensed individually. The number of installations of the viewer

software from the camera can be checked on the [Upgrade] tab of the "Maintenance" page (☞page 63). Refer to

your dealer for the software licensing.

Display the setup menu and configure the settings of the camera using a PC

The settings of the camera can be configured on the setup menu.

The setup menu is only operable by users whose access level is "1. Administrator".

How to display the setup menu

Step 1

Display the "Live" page. (☞Operating instructions)

Step 2

Click the [Setup] button on the "Live" page.

→The window with the user name and password entry

fields will be displayed.

Step 3

Click the [OK] button after entering the user name and

the password.

→The setup menu will be displayed.

Refer to the next page for further information about

this menu.

Step 1

Click the desired button in the frame on the left of the

window to display the respective setup menu.

When there are tabs at the top of the setup page dis-

played in the frame on the right of the window, click the

desired tab to display and configure the setting items

relating to the name of the tab.

Step 2

Complete each setting item displayed in the frame on

the right of the window.

Step 3

After completing each setting item, click the [SET] but-

ton to apply them.

Important:

When there are two or more [SET] buttons on the

page, click the respective button to the edited setting

item.

When completing the setting items in field A, click

the [SET] button below field A (A-1). The edited set-

ting items in field A will not be applied unless the

[SET] button below field A (A-1) is clicked.

In the same manner as above, click the [SET] button

below field B (B-1) when completing the setting

items in field B.

How to operate the setup menu

A-1

B-1

Menu buttons Setup page

About the setup menu window

q[Live] button

Click this button to display the "Live" page.

w[Basic setup] button

Click this button to display the "Basic setup" page.

The basic settings such as time and date and cam-

era title, and the settings relating to the NTP server

and the SD memory card can be configured on the

"Basic setup" page. Refer to page 8 for further infor-

mation.

e[Camera setup] button

Click this button to display the "Camera setup" page.

The settings relating to JPEG/MPEG-4 images and

camera operation can be configured on the "Camera

setup" page. Refer to page 20 for further informa-

tion.

r[Multi-screen setup] button

Click this button to display the "Multi-screen setup"

page. The cameras to be used for the multi-screen

display can be registered on the "Multi-screen setup"

page. Refer to page 37 for further information.

t[Alarm setup] button

Click this button to display the "Alarm setup" page.

The settings relating to alarm occurrences such as

settings for the alarm action at an alarm occurrence,

the alarm occurrence notification, and the VMD area

settings can be configured on the "Alarm setup"

page. Refer to page 38 for further information.

y[Authentication setup] button

Click this button to display the "Authentication setup"

page. The settings relating to the authentication

such as users and PCs restrictions for accessing the

camera can be configured on the "Authentication

setup" page. Refer to page 49 for further informa-

tion.

u[Server setup] button

Click this button to display the "Server setup" page.

The settings relating to the mail server and the FTP

server to which the camera accesses can be config-

ured on the "Server setup" page. Refer to page 51

for further information.

!3 Setup page

!2 Status display

area

q[Live] button

w[Basic setup] button

e[Camera setup] button

r[Multi-screen setup] button

t[Alarm setup] button

y[Authentication setup]

button

u[Server setup] button

i[Network setup] button

o[Schedule setup] button

!0 [Maintenance] button

!1 [Help] button

i[Network setup] button

Click this button to display the "Network setup" page.

The network settings and the settings relating to

DDNS (Dynamic DNS), SNMP (Simple Network

Management Protocol) and the FTP (File Transfer

Protocol) periodic transmission function can be con-

figured on the "Network setup" page. Refer to page

53 for further information.

o[Schedule setup] button

The "Schedule" page will be displayed.

On the "Schedule" page, it is possible to designate

time zones to allow to receive alarm input or to allow

to activate the video motion detection (VMD) func-

tion. Refer to page 61 for further information.

!0 [Maintenance] button

Click this button to display the "Maintenance" page.

System log check, firmware upgrade and initializa-

tion of the setup menu can be carried out on the

"Maintenance" page. Refer to page 62 for further

information.

!1 [Help] button

Click this button to display the "Help" page.

!2 Status display area

The title of the camera whose settings are currently

being configured will be displayed.

!3 Setup page

Pages of each setup menu will be displayed. There

are tabs for some setup menus. When the under-

lined item is clicked, the corresponding help page

will be displayed.

Configure the basic settings of the camera [Basic setup]

The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD

memory card can be configured on the "Basic setup" page.

The "Basic setup" page has 4 tabs; the [Basic] tab, the [NTP] tab, the [SD memory card] tab and the [LOG] tab.

Configure the basic settings [Basic]

Click the [Basic] tab on the "Basic setup" page. (☞pages 4 and 5: How to display/operate the setup menu)

The settings such as the camera name, time and date, etc. can be configured on this page.

[Camera title]

Enter the title of the camera. Click the [SET] button after

entering the title of the camera. The entered title will be

displayed in the status display area.

Number of characters for the camera title: 0 - 20

characters

Default: WV-NS954 (The model number in use will be

displayed.)

[Time & date setup]

Enter the current time and date. When "12-hours" is

selected for "Time display", "AM" or "PM" can be select-

ed.

Available range: 01/01/2007 0:00:00 –

12/31/2035 23:59:59

[Time display]

Select the time display format from "12-hours", "24-

hours" and "OFF". Enter the current hour reflecting this

setting when entering the current time and date for

"Time & date setup". To hide time and date, select

"OFF".

Default: 24-hours

[Date/time display format]

Select a date/time display format.

When "07/04/01 13:10:00" is set for "Time & date setup"

after selecting "24-hours" for "Time display", time and

date will be respectively displayed as follows.

DD/MM/YYYY: 01/04/2007 13:10:00

MM/DD/YYYY: 04/01/2007 13:10:00

DD/Mmm/YYYY: 01/Apr/2007 13:10:00

YYYY/MM/DD: 2007/04/01 13:10:00

Mmm/DD/YYYY: Apr/01/2007 13:10:00

Default: DD/MM/YYYY

[Daylight saving (Summertime)]

Select "ON" or "OFF" to determine whether or not to

apply daylight saving time. Select "ON" or "OFF" to

determine whether or not to apply daylight saving time.

ON: Applies summer time. An asterisk (*) will be dis-

played on the left side of the displayed time and

date.

OFF: Does not apply summer time.

Default: OFF

[Link/Access LED]

Select "ON" or "OFF" to determine whether or not to

light the link LED, the access LED, the SD memory card

error LED and the power LED.

Select "ON" to check the operational status by lighting

the LEDs. Select "OFF" to turn off the LEDs at all times.

Default: ON

Notes:

•Link LED: This LED will light when communication

with the connected device is available. [Orange]

•Access LED: This LED will light when accessing a

network. [Yellow]

•SD memory card error LED: This LED will light

when the SD memory card is unavailable to save

images. [Red]

•Power LED: This LED will light when the power is

on. [Green]

[OSD Position]

Select a position where time and date, camera title, pre-

set ID, panning/tilting angle, zoom ratio are to be dis-

played on the "Live" page.

Upper left: The above information will be displayed at

the upper left corner of the main area on the "Live"

page.

Lower left: The above information will be displayed at

the lower left corner of the main area on the "Live"

page.

Upper right: The above information will be displayed at

the upper right corner of the main area on the "Live"

page.

Lower right: The above information will be displayed at

the lower right corner of the main area on the "Live"

page.

Default: Upper left

[Alarm status update mode]

Select an interval of the camera status notification from

the following.

When the status of the camera changes, the alarm

occurrence indication button, the receiver button, the

transmission button, the AUX button or the SD saving

status indication button will be displayed to notify of the

camera status.

Polling (30 sec): Updates the status each 30 seconds

and provide notification of the camera status.

Real time: Provide notification of the camera status

when the status has changed.

Default: Real time

Note:

Depending on the network environment, notification

may not be provided in real time.

[Alarm status port]

When selecting "real time" for "Alarm status update

mode", designate a port number to which the status

change notification is to be sent.

Available port number: 1 - 65535

Default: 31004

[Automatic installation of Viewer software]

Determine whether or not to install the viewer software

from this camera.

ON: Installs the viewer software from the camera auto-

matically.

OFF: The viewer software cannot be installed from the

camera.

Default: ON

Important:

• It is impossible to display images and to receive/

transmit audio between the camera and the PC

when the viewer software "Network Camera View3"

is not installed on the PC.

• The number of the viewer software installations can

be checked on the [Upgrade] tab of the

"Maintenance" page.

Configure the settings relating to the NTP server [NTP]

Click the [NTP] tab on the "Basic setup" page. (☞pages 4 and 5: How to display/operate the setup menu)

The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this

page.

[Time adjustment]

Select the time adjustment method from the following.

Time adjusted by the selected method will be used as

the standard time of the camera.

Manual setup: Time set on the [Basic] tab on the

"Basic setup" page will be used as the standard time

of the camera.

Synchronization with NTP server: Time automatically

adjusted by synchronizing with the NTP server will

be used as the standard time of the camera.

Default: Manual setup

[NTP server address]

Enter the IP address or the host name of the NTP serv-

er.

Number of characters for the NTP server address:

1 - 128 characters

Default: None (blank)

Important:

When entering the host name for "NTP server

address", it is necessary to configure the DNS set-

tings on the [Network] tab of the "Network setup"

page. (☞page 54)

[NTP port]

Enter a port number to be used for the NTP server.

Available port number: 1 - 65535

Default: 123

[Synchronization interval]

Select an interval (1 - 24 hours: in 1 hour intervals) of

synchronization with the NTP server.

Default: 1 hour

[Time zone]

Select a time zone corresponding to the location where

the camera is in use.

Default: (GMT) Greenwich Mean Time: Dublin,

Edinburgh, Lisbon, London

Otros manuales para WV-NS950 series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Panasonic

Panasonic

Panasonic WV-CP310 Manual de usuario

Panasonic

Panasonic GPUS522HA - IND CCD CAMERA Manual de usuario

Panasonic

Panasonic AWHE100N - HD INTEGRATED CAMERA Manual de usuario

Panasonic

Panasonic Authenticam BM-ET100US Manual de usuario

Panasonic

Panasonic WVNP472 - COLOR CCTV CAMERA Manual de usuario

Panasonic

Panasonic WV-BP102 Manual de usuario

Panasonic

Panasonic WVNM100 - NETWORK COLOR CAMERA Manual de usuario

Panasonic

Panasonic i-Pro WV-SF335 Manual de usuario

Panasonic

Panasonic WVNS324 - NETWRK CLR DOME CAME Manual de usuario

Panasonic

Panasonic Super Dynamic III WV-CW384 Manual de usuario

Panasonic

Panasonic WV-CS570 Manual de usuario

Panasonic

Panasonic WV-S15700-V2L Series Manual de usuario

Panasonic

Panasonic EggCam GP-KR001 Manual de usuario

Panasonic

Panasonic WV-S4576L Guía de instalación

Panasonic

Panasonic WVBP500 - CCTV CAMERA Manual de usuario

Panasonic

Panasonic GPMF502 - ICD CAMERA Manual de usuario

Panasonic

Panasonic KX-HNC850 Manual de usuario

Panasonic

Panasonic BB-HCM581A - Network Camera Pan Manual de usuario

Panasonic

Panasonic HomeHawk Manual de usuario

Panasonic

Panasonic WV-CP254 Manual de usuario

Panasonic

Panasonic WV-CF284T Manual de usuario

Panasonic

Panasonic WV-CP150E Manual de usuario

Panasonic

Panasonic WV-CW594A Manual de usuario

Panasonic

Panasonic WVCLR830 - COLOR CCTV CAMERA Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario