Panasonic OneHome KX-HCM110A Manual de usuario
Additional Feature table
The following features are added to the camera. Read both the Operating
Instructions manuals before using the product.
Additional Features Contents Page
Error messages and screen
color
When general or guest users access
the Single Camera page outside the
Operation Time, or when over 30 (the
maximum number) users access the
page simultaneously, a gray screen
and error messages will be displayed
on the page.
page 3
Increase in the number of preset
positions
Up to 20 preset positions can be
registered.
page 4
[Time] on the Camera Page [Time] of Return to Specified Position
on the Camera page is changed.
page 7
The Lens Position When
Triggered by alarm signal when
buffering or transferring images
One of 20 registered preset positions,
as well as the home position or alarm
positions 1–2, can be selected for the
Lens Position When Triggered by
alarm signal.
page 8
The Lens Position When
Triggered by motion detection
when buffering or transferring
images
One of 20 registered preset positions,
as well as the home position or alarm
positions 1–2, can be selected for the
Lens Position When Triggered by
motion detection.
page 9
Operating Instructions (Additional Features)
Model No.
KX-HCM110A
Network Camera
Operating Instructions (Additional Features)
2
Trademarks
• This software is based in part on the work of the Independent JPEG Group.
• All other trademarks identified herein are the property of their respective
owners.
Abbreviations
• "Network Camera" is called "Camera" in this Operating Instructions.
Increase in the number of preset
positions on your cell phone
Still images from 20 preset positions
can be viewed from a compatible cell
phone over the Internet.
page 10
Additional Features Contents Page
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 3
Error messages and screen color
When general or guest users access the Single Camera page outside the
Operation Time, or when over 30 (the maximum number) users access the page
simultaneously, a gray screen and error messages will be displayed on the page.
Error Message Cause and Remedy
Operation time has
been specified.
When general or guest users access the Single Camera
page outside the Operation Time, a gray screen will be
displayed. Clicking [Refresh] on the web browser displays
an error message. Consult your administrator about the
Operation Time.
Maximum number
of connections
exceeded.
When [Motion] is selected for the Refresh Interval, up to 30
users can access the camera simultaneously. For the 31st
user, a gray screen and an error message will be displayed
on the Single Camera and Buffered Image pages. Wait for
a moment, and click [Refresh] on the web browser, or
change the value for the Refresh Interval.
An error message
is displayed.
Operating Instructions (Additional Features)
4
Increase in the number of preset positions
Up to 20 preset positions can be registered. These positions can be changed.
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
3. Select a preset position (1–20) from
drop-down list, and enter the preset
name.
E.g.:
Setting "Center" for the preset 5. When
selecting a preset button (1–8), enter the
preset name.
• Maximum 15 characters.
• Enter ASCII characters or
characters in each language. But
[Space], ["], ['], [&], [<] and [>] are
not available.
4. Click [Save] to register, or click [Back]
and [Cancel] to cancel.
• If "Success!" is displayed, click
[Back].
Home
Position,
Alarm
Position
and Preset
Position
Setting
a name
Preset
number
The preset
number and
preset
name are
displayed.
The button
turns blue.
Only buttons
1 to 8 are
displayed.
Program
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 5
Note
• Only an administrator can register preset positions.
• When registering preset positions, the camera also saves brightness and
white balance settings. The digital zoom value will not be saved.
• The registered preset positions can be selected in the Specified Position
of Return to Specified Position on the Camera page. (See page 7)
• The registered preset positions can be selected in the Lens Position When
Triggered setting when Alarm No.1–2 or Motion Detection is selected for
the Trigger in the Trigger Setting window. (See page 8 or page 9)
• The registered preset positions can be viewed on your cell phone. (See
page 10)
Viewing the Image
1. Click or select the home position,
alarm position or registered preset
position.
• The camera takes each position,
and the image is displayed.
Note
• The registered preset positions
can be viewed on your cell
phone.
• The preset position may be
developed into a gap.
Center
Home Position,
Alarm Position
and Preset
Position
Pan/Tilt
After selecting
a preset position,
the preset name
will be displayed.
Putting the
cursor displays
the preset
name.
Home
Position
Operating Instructions (Additional Features)
6
Changing or Deleting the Settings
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.
2. Pan and tilt the camera to a desired
position.
• When deleting, this step is not
necessary.
3. Click the home position, alarm position
or a preset number (1–20).
Note
All the items can be selected from the
drop-down list. It is also possible to set
positions 1–8 by clicking the preset
buttons.
4. Click [Save] after setting the preset
name or click [Delete].
• If you quit to change or delete
settings, click [Back], and then
[Cancel].
• If "Success!" is displayed, click
[Back].
Note
The home position or the alarm position
cannot be deleted, and these position
names cannot be changed either.
Pan/Tilt
Changing
the name
Preset
number
The deleted
button turns
white.
Home
Position
Home
Position,
Alarm
Position
and Preset
Position
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 7
[Time] on the Camera Page
[Time] of Return to Specified Position on the Camera page is changed.
Setting Description
Return to
Specified
Position
• If the camera is not operated during the specified period,
the camera turns to the specified position.
• The following settings are available.
– Time - Do not move, 10 s, 20 s, 30 s, 1 min, 5 min, 10
min, 30 min, 1 h
– Specified Position - Home Position, Preset No.1–20,
Alarm No.1, Alarm No.2
Note
• If you did not set any presets, the camera cannot turn
to the preset position.
• When registering preset positions, set Time long
enough to complete the registration process.
If Time is set too short, the camera will return to the
specified position while registering preset positions.
Operating Instructions (Additional Features)
8
The Lens Position When Triggered by alarm signal when
buffering or transferring images
One of 20 registered preset positions, as well as the home position or alarm
positions 1–2, can be selected for the Lens Position When Triggered by alarm
signal. Images from this position will be buffered or transferred.
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts
after the camera turns to the home position, alarm positions 1–2 or registered
preset positions 1–20.
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Lens Position
When Triggered
• Set the home position, an alarm position 1–2 or registered
preset position 1–20 when an alarm signal is detected.
Operating Instructions (Additional Features)
[For assistance, please call: 1-800-272-7033] 9
The Lens Position When Triggered by motion detection when
buffering or transferring images
One of 20 registered preset positions, as well as the home position or alarm
positions 1–2, can be selected for the Lens Position When Triggered by motion
detection. Images from this position will be buffered or transferred.
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts
after the camera turns to the home position, alarm positions 1–2 or registered
preset positions 1–20.
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Lens Position
When Triggered
• Set the home position, an alarm position 1–2 or registered
preset position 1–20 when motion detection is triggered.
Operating Instructions (Additional Features)
10
Increase in the number of preset positions on your cell phone
Still images from 20 preset positions can be viewed from a compatible cell phone
over the Internet.
You can view registered preset positions by
clicking links.
Displays up to 50 logs chronologically. The logs
are displayed only for an administrator.
Goes to the control page.
Displays the number of new logs.
Displays the date and time, the kind of signal and
sensor.
Goes to the control page.
Display
Operation
Signal
A1 R
A2 F
MD
Alarm1
Alarm2
Motion Detection
Rising: GND to
Open (High).
Falling: Open (High)
to GND.
-----
Otros manuales para OneHome KX-HCM110A
5
Otros manuales de Cámara de seguridad de Panasonic
Panasonic
Panasonic I-PRO EXTREME Series Manual de usuario
Panasonic
Panasonic BL-C30C Manual de usuario
Panasonic
Panasonic BB-HCM705A - Fixed MP H.264 Dome POE Indoor Network... Manual de usuario
Panasonic
Panasonic WVNS324 - NETWRK CLR DOME CAME Manual de usuario
Panasonic
Panasonic BB-HCM581CE Manual de usuario
Panasonic
Panasonic BM-ET500E Manual de usuario
Panasonic
Panasonic WV-CF250 Manual de usuario
Panasonic
Panasonic WJND400 - NETWORK DISK RECORDER Manual de servicio
Panasonic
Panasonic WV-SW175 Manual de usuario
Panasonic
Panasonic A34 Manual de usuario
Panasonic
Panasonic OneHome KX-HCM110A Manual de usuario
Panasonic
Panasonic BB-HCM701CE Manual de funcionamiento
Panasonic
Panasonic BB-HCM580A Manual de usuario
Panasonic
Panasonic WV-CF224EX Manual de usuario
Panasonic
Panasonic AJ-D910WBP Manual de usuario
Panasonic
Panasonic WVCS554 - COLOR CAMERA Manual de usuario
Panasonic
Panasonic BB-HCM371A - Outdoor Wireless Network Camera Manual de usuario
Panasonic
Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Manual de usuario
Panasonic
Panasonic WV-CS850B Manual de usuario
Panasonic
Panasonic WV-CL920A Series Manual de usuario
