Panasonic BL-C140A - Outdoor MPEG-4 Network Camera Manual de usuario

Installation Guide

Network Camera

Please read this document before using the product, and save this document for future reference.

Panasonic Network Camera Website: http://panasonic.co.jp/pcc/products/en/netwkcam/

regionlinks/index.html

Model No. BL-C140

BL-C160

Outdoor Ready

BL-C140 BL-C160

• This document is written for both the BL-C140 and BL-C160. Available features and operations

vary slightly depending on the model. You can confirm the model no. of your camera by checking

the model no. printed on the front of the camera. Features and operations that apply to the

BL-C160 only are marked as “BL-C160 only” in this document.

• The camera illustrations in this document depict the BL-C160.

• Model number suffixes (“A”, “CE”, and “E”) are omitted from the following model numbers shown

in this document, unless necessary.

BL-C140A, BL-C140CE, BL-C140E, BL-C160A, BL-C160CE, BL-C160E

Please read the included Important Information before proceeding.

Complete Operating Instructions and all other documentation can be found

on the included CD-ROM.

• This document (Installation Guide) explains how to physically connect the camera to the power

supply and network, as well how to mount or place the camera for regular use.

• The Setup Guide describes how to set up the camera so that it can be accessed using a PC.

• Refer to the Operating Instructions on the CD-ROM for details regarding the camera’s features.

• Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or

using the camera.

Abbreviations

• UPnP is the abbreviation for “Universal Plug and Play”.

• The Network Camera is referred to as “the camera” in this document.

• The Setup CD-ROM is referred to as “the CD-ROM” in this document.

Table of Contents

Installation Procedure Overview................................................... 4

Preparation...................................................................................... 5

Camera Diagrams ........................................................................... 7

Choosing an Installation Location................................................ 9

Detection Features............................................................................................................. 9

Mounting Location............................................................................................................ 13

Recommended Installation Locations .............................................................................. 14

Installation Examples ....................................................................................................... 15

Light Brightness (BL-C160 Only) ..................................................................................... 16

Effect of Brightness and Distance on Image Quality........................................................ 16

Connections.................................................................................. 17

Camera Mounting ......................................................................... 18

Adjusting Range and Sensitivity................................................. 23

Preventing Sensor Interference (BL-C160 Only) ............................................................. 23

Adjusting Motion Detection Sensitivity ............................................................................. 25

Adjusting Sensor Sensitivity (BL-C160 Only)................................................................... 26

Sensor Range Caps (BL-C160 Only)............................................................................... 27

Installation Procedure Overview

The following is an overview of the steps required to install and setup the camera.

All steps are explained in this document unless otherwise noted.

Preparation

Confirm that you have all the items required for installation.

Camera Diagram

Confirm you know the names of the camera’s physical features.

Connections

Connect the camera to your network and to the power outlet.

Setup

Setup the camera (described in the included Setup Guide). This involves configuring the camera

so that it can be accessed from a PC.

Mounting

Mount or place the camera.

Preparation

Confirm the following items are included in the camera’s packaging.

Main Unit (1 pc.)

The appearance of your camera

depends on which model you have

purchased.

Screw A (6 pcs.)

Order No. XTB4 + 20AFJ

Used for wall mounting the camera.

Screw B (3 pcs.)

Order No. XTB26 + 10GVW

Used for securing the safety wire to the

camera and for fixing the right-angle

joint to the camera.

Washer L (1 pc. for the screw A)

Order No. XWG4F16VW

Used when securing the safety wire to

the wall.

Washer S (1 pc. for the screw B)

Order No. XWG26D12VW

Used when securing the safety wire to

the camera.

AC Adaptor (1 pc.)

Order No. PQLV206Y

Cord Length: About 3 m (9 feet 10

inches)

BL-C140A/BL-C160A

Order No. PQLV216CE1Z

Cord Length: About 3 m (9 feet 10

inches)

BL-C140CE/BL-C140E/BL-C160CE/

BL-C160E

AC cord (1pc. for BL-C140CE/

BL-C140E/BL-C160CE/BL-

C160E)

Order No. PFJA02A006Z

Cord Length: About 1.8 m (5 feet

11 inches)

BL-C140CE/BL-C160CE

Order No. PSJA1106Z

Cord Length: About 1.8 m (5 feet

11 inches)

BL-C140E/BL-C160E

BL-C140 BL-C160

You will need the following additional items to install and configure the camera.

– a PC (see the system requirements in the Important Information document)

– 2 LAN cables (1 indoor cable and 1 outdoor cable)

– a router

Safety Wire (1 pc.)

Order No. PQME10080Z

Used to secure the camera when wall

mounting it.

Power Transfer Unit (1 pc.)

Order No. PNWP3C160A

Used to power the camera

Flexible Stand (1 pc.)

Order No. PQKL10082Z1

Used to attach the camera to the wall

Right-Angle Joint (1 pc.)

(with O-ring)

Order No. PNYCC160A

Used to protect the camera from

water

Foam Strip (1pc.)

Order No. PQHG10748Z

Used to protect the camera from water

Self Bonding Tape (1pc.)

Order No. PSHG1235Z

Used to protect the camera from

water

Sensor Range Cap (1 pc.)

[BL-C160 Only]

Order No. PQHG10765Z

Used to limit the sensor detection range

Setup CD-ROM (1 pc.)

Order No. PQQX15704TCD

Contains the Setup Program needed

to configure the camera, as well as

the camera’s documentation.*

*See the included Important Information for a

description of each document.

Important Information (1 pc.)

Installation Guide (this

document) (1 pc.)

Setup Guide (1 pc.)

Camera Diagrams

BL-C140

*1 See 1.1 Understanding the Camera Indicator in the Troubleshooting Guide on the CD-ROM for indicator meaning.

Front View

Housing

Indicator*1

Lens

Lens cover

Rear View

Safety wire hole

DATA/POWER IN

Stand mounting hole

FACTORY DEFAULT RESET button

Serial number and MAC address label

BL-C160

*1 See 1.1 Understanding the Camera Indicator in the Troubleshooting Guide on the CD-ROM for indicator meaning.

*2 The brightness sensor determines when the light turns on.

Front View

Housing

Light

Indicator*1

Lens

Lens cover

Brightness sensor*2

Built-in sensor (pyroelectric infrared

sensor)

Rear View

Safety wire hole

DATA/POWER IN

Stand mounting hole

FACTORY DEFAULT RESET button

Serial number and MAC address label

Choosing an Installation Location

Please read the following information about the camera’s motion detection feature and built-in

sensor (BL-C160 only) before deciding where to mount the camera.

Detection Features

Motion Detection Feature

The camera detects changes in the images being displayed.

Active Motion Detection Range

• When the color of moving objects and the background are similar, motion may not be correctly

detected.

• If there are sudden changes to overall light levels, motion may be incorrectly detected.

• For up to 2 seconds immediately following the light turning on or off no detection will take place.

(BL-C160 only)

Camera

About 5 m (16 feet 5 inches)

Detection range length

About 45q

Detection range angle

Detection Range Characteristics of the Motion Detection Feature

• Motion detection becomes more difficult as it becomes darker.

• The motion detection function works by detecting changes in contour and brightness in moving

objects. This is done in order to reduce inaccurate detections due to changes in brightness.

• The camera can easily detect motion when objects move sideways in front of the camera, but

cannot easily detect motion when objects move toward the front of the camera.

Easy to detect

Difficult to detect

About 58q

Camera

Detection range

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Panasonic

Panasonic

Panasonic WV-BP102 Manual de usuario

Panasonic

Panasonic WV-SPW631LT Manual de usuario

Panasonic

Panasonic WV-X4573L Guía de instalación

Panasonic

Panasonic WVBP330 - B/W CCTV CAMERA Manual de usuario

Panasonic

Panasonic BB-HCM515A - Network Camera w/ Audio Manual de usuario

Panasonic

Panasonic WV-S1531LTN Manual de funcionamiento

Panasonic

Panasonic WV-S2570L Manual de funcionamiento

Panasonic

Panasonic WV-NP304 Manual de usuario

Panasonic

Panasonic VL-SDM100A Manual de usuario

Panasonic

Panasonic WV-CZ392E: WV-CZ492E Manual de usuario

Panasonic

Panasonic OneHome BB-HCM331A Manual de usuario

Panasonic

Panasonic AWE300S - SEPERATE CAMERA Manual de usuario

Panasonic

Panasonic AW-E750E Manual de usuario

Panasonic

Panasonic BB-HCM381 Instrucciones de funcionamiento

Panasonic

Panasonic GP-VD130E Manual de usuario

Panasonic

Panasonic WV-SW598 Manual de usuario

Panasonic

Panasonic WV-BL200 Manual de usuario

Panasonic

Panasonic Super Dynamic III WV-CS954 Manual de usuario

Panasonic

Panasonic WV-CP310 Manual de usuario

Panasonic

Panasonic WV-CW590G Manual de usuario

Panasonic

Panasonic AW-HE100 Manual de usuario

Panasonic

Panasonic WV-S15700-V2L Series Manual de usuario

Panasonic

Panasonic BB-HCM311 Manual de usuario

Panasonic

Panasonic WV-SFV311A Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario