Panasonic PT-REQ10 Manual de usuario
Thank you for purchasing this Panasonic product.
■The Operating Instructions correspond to the rmware version 2.03 and higher.
■This manual is common to all the models regardless of suxes of the Model No.
For details on the Model No., please refer to “Suxes of the Model No.” (x page 2).
■Before operating this product, please read the instructions carefully and save this manual
for future use.
■Before using this product, be sure to read “Read this rst!” (xpages 6 to 19).
DPQP1446ZB/X1
DLP™ Projector Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No. PT-REQ12
PT-REQ10
PT-REQ80
* Resolution is 3 840 x 2 400 dots
(QUAD PIXEL DRIVE: ON)
2 - ENGLISH
■Suxes of the Model No.
zfor USA, Canada
B: Black model, the standard zoom lens supplied
LB: Black model, the lens sold separately
W: White model, the standard zoom lens supplied
LW: White model, the lens sold separately
zfor United States Government
LBUG: Black model, the lens sold separately
zfor EU, EFTA, UK, Turkey
BEJ: Black model, the standard zoom lens supplied
LBEJ: Black model, the lens sold separately
WEJ: White model, the standard zoom lens supplied
LWEJ: White model, the lens sold separately
zfor Korea
B: Black model, the standard zoom lens supplied
W: White model, the standard zoom lens supplied
zfor Taiwan
B: Black model, the standard zoom lens supplied
zfor India
BD: Black model, the standard zoom lens supplied
LBD: Black model, the lens sold separately
zfor other countries or regions
BE: Black model, the standard zoom lens supplied
LBE: Black model, the lens sold separately
WE: White model, the standard zoom lens supplied
LWE: White model, the lens sold separately
ENGLISH - 3
Contents
Contents
Read this rst! 6
Chapter 1 Preparation
Precautions for use 24
Intended use of the product 24
Installation and handling of the laser product
(for USA and Canada) 24
Cautions when transporting 24
Cautions when installing 24
Cautions when setting up the projector 26
Security 27
Notes regarding the wireless LAN 28
QUAD PIXEL DRIVE 28
Slot 29
DIGITAL LINK 29
Art-Net 29
Application software supported by the projector
29
Storing 30
Disposal 30
Cautions on use 30
Accessories 31
Optional accessories 32
About your projector 33
Remote control 33
Projector body 35
Names and functions of the Function Board
(optional) 38
Preparing the remote control 40
Inserting and removing the batteries 40
When using the multiple projectors 40
Connecting the remote control to the projector
with a cable 40
Chapter 2 Getting Started
Setting up 42
Usable outlet 42
Installation mode 42
Parts for installation (optional) 44
Projected image and throw distance 44
Adjusting adjustable feet 50
Removing/attaching the projection lens 51
Removing the projection lens 51
Attaching the projection lens 52
Installing the Function Board 54
Before installing or removing the Function
Board 54
For Intel® SDM-S specication Function Board 55
Installing the Function Board 56
Removing the Function Board 56
Installing the SFP module 57
Removing the SFP module 58
Connecting 59
Before connecting 59
Connecting example: AV equipment 60
Connecting example: Computers 62
Connecting example using DIGITAL LINK 63
Connecting example when using the
contrast synchronization function/shutter
synchronization function 65
Chapter 3 Basic Operations
Switching on/o the projector 68
Connecting the power cord 68
Power indicator 69
Switching on the projector 70
When the initial setting screen is displayed 71
When the administrator account setting screen
is displayed 77
Making adjustments and selections 79
Switching o the projector 80
Projecting 81
Selecting the input signal 81
Adjusting the focus, zoom, and lens shift 83
Adjusting the focus balance 84
Executing the lens calibration 84
Moving the projection lens to the home position
85
Lens shift range 86
Using the USB memory 87
Notes on use 87
USB memory that can be used with the
projector 87
Attaching the USB memory 87
Removing the USB memory 87
Operating with the remote control 88
Using the shutter function 88
Using the on-screen display function 88
Using the function button 89
Displaying test patterns 89
Using the status function 90
Setting ID number of the remote control 90
4 - ENGLISH
Contents
Chapter 4 Settings
Menu navigation 92
Navigating through the menu 92
Main menu 93
Sub-menu 94
[PICTURE] menu 98
[PICTURE MODE] 98
[CONTRAST] 98
[BRIGHTNESS] 98
[COLOR] 99
[TINT] 99
[COLOR TEMPERATURE] 99
[WHITE GAIN] 101
[GAMMA] 101
[SYSTEM DAYLIGHT VIEW] 103
[SHARPNESS] 103
[NOISE REDUCTION] 103
[DYNAMIC CONTRAST] 103
[COLOR SPACE] 106
[SYSTEM SELECTOR] 106
[DEFAULT PICTURE MODE] 107
sRGB-compliant video 107
[POSITION] menu 109
[SHIFT] 109
[ASPECT] 109
[ZOOM] 110
[GEOMETRY] 111
[ADVANCED MENU] menu 117
[DIGITAL CINEMA REALITY] 117
[GRADATION SMOOTHER] 117
[BLANKING] 117
[EDGE BLENDING] 118
[FRAME RESPONSE] 122
[QUAD PIXEL DRIVE] 122
[RASTER POSITION] 122
[DISPLAY LANGUAGE] menu 123
Changing the display language 123
[DISPLAY OPTION] menu 124
[COLOR MATCHING] 124
[COLOR CORRECTION] 126
[SCREEN SETTING] 126
[BACKUP INPUT SETTING] 126
[HDMI IN] 127
[DisplayPort IN] 131
[SLOT IN] 133
[ON-SCREEN DISPLAY] 143
[MENU MODE] 145
[BACK COLOR] 146
[STARTUP LOGO] 146
[UNIFORMITY] 146
[SHUTTER SETTING] 147
[FREEZE] 149
[WAVEFORM MONITOR] 149
[CUT OFF] 151
[PROJECTOR SETUP] menu 152
[PROJECTOR ID] 152
[PROJECTION METHOD] 152
[LENS] 153
[SLOT SETTING] 158
[OPERATION SETTING] 159
[LIGHT OUTPUT] 163
[BRIGHTNESS CONTROL] 163
[STANDBY MODE] 169
[QUICK STARTUP] 169
[POWER MANAGEMENT] 170
[NO SIGNAL SETTING] 171
[INITIAL STARTUP] 174
[STARTUP INPUT SELECT] 174
[DATE AND TIME] 175
[SCHEDULE] 176
[MULTI PROJECTOR SYNC] 177
[RS-232C] 180
[REMOTE2 MODE] 182
[FUNCTION BUTTON] 182
[STATUS] 182
[INDICATOR SETTING] 186
[DATA CLONING] 187
[SAVE ALL USER DATA] 187
[LOAD ALL USER DATA] 188
[HDMI CEC] 188
[INITIALIZE] 190
[FIRMWARE UPDATE] 192
[SAVE LOG] 192
[SERVICE PASSWORD] 192
[TEST PATTERN] menu 193
[TEST PATTERN] 193
ENGLISH - 5
Contents
[SIGNAL LIST] menu 196
Registering new signals 196
Renaming the registered signal 196
Deleting the registered signal 196
Expanding signal lock-in range 197
Protecting the registered signal 197
Sub memory 198
[SECURITY] menu 199
[SECURITY PASSWORD] 199
[SECURITY PASSWORD CHANGE] 199
[CONTROL DEVICE SETUP] 200
[CONTROL DEVICE PASSWORD CHANGE]
201
[NETWORK] menu 203
[ETHERNET TYPE] 203
[DIGITAL LINK] 203
[WIRED LAN] 205
[WIRELESS LAN] 206
[PROJECTOR NAME] 207
[NETWORK STATUS] 207
[NFC SETTING] 208
[ADMINISTRATOR ACCOUNT] 209
[NETWORK SECURITY] 211
[NETWORK CONTROL] 212
[PJLink] 212
[Art-Net] 214
Chapter 5 Operations
Network connection 217
Connecting via wired LAN 217
Connecting via wireless LAN 219
Using the web control function 222
Computer that can be used for setting 222
Accessing from the web browser 222
[Status] 226
[Projector control] 231
[Detailed set up] 235
[Set up password] 251
License download page 253
Using the data cloning function 254
Copying the data to another projector via LAN
254
Copying the data to another projector using
USB 256
Using HDMI CEC function 258
Connecting a CEC-compatible device 258
Setting the projector and CEC-compatible
device 258
Operating the CEC-compatible device with the
projector remote control 258
About the power link operations 259
Updating the rmware 260
Updating the rmware via LAN 260
Updating the rmware using the USB memory
265
Chapter 6 Maintenance
Light source/temperature indicators 268
When an indicator lights up 268
Maintenance 270
Before maintenance 270
Maintenance 270
Troubleshooting 271
Self-diagnosis display 273
Chapter 7 Appendix
Technical information 275
Using PJLink function 275
Using Art-Net function 277
Control commands via LAN 281
<SERIAL IN> / <SERIAL OUT> terminal 285
<REMOTE 2 IN> terminal 289
Specications 290
Dimensions 294
List of compatible signals 295
Precautions for attaching the Ceiling Mount
Bracket 306
Index 308
6 - ENGLISH
Read this rst!
Read this rst!
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: Topreventdamagewhichmayresultinreorshockhazard,donotexposethisappliancetorain
or moisture.
Thisdeviceisnotintendedforuseinthedirecteldofviewatvisualdisplayworkplaces.Toavoid
incommodingreexionsatvisualdisplayworkplacesthisdevicemustnotbeplacedinthedirect
eldofview.
TheequipmentisnotintendedforusedatavideoworkstationincomplianceBildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Removetheplugfromthemainssocketwhenthisunitisnotinuseforaprolongedperiodoftime.
2. Topreventelectricshock,donotremovecover.Nouserserviceablepartsinside.Referservicingtoqualied
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-
typemainsplug.Thisplugwillonlytanearthing-typemainssocket.Thisisasafetyfeature.Ifyouare
unabletoinserttheplugintothemainssocket,contactanelectrician.Donotdefeatthepurposeofthe
earthing plug.
WARNING:
This equipment is compliant with Class A of CISPR32.
In a residential environment this equipment may cause radio interference.
(for Taiwan)
WARNING:
This equipment complies with the Class A standard of CNS15936.
This is Class A information technology equipment that may cause radio frequency interference when used in a
residentialenvironment,inwhichtheuserwillberequiredtotakecertainappropriatecountermeasures.
CAUTION: Toassurecontinuedcompliance,followtheattachedinstallationinstructions.Thisincludesusing
theprovidedpowercordandshieldedinterfacecableswhenconnectingtocomputerorperipheral
devices.Also,anyunauthorizedchangesormodicationstothisequipmentcouldvoidtheuser’s
authority to operate this device.
Thisisadevicetoprojectimagesontoascreen,etc.,andisnotintendedforuseasindoorlightingina
domestic environment.
Directive 2009/125/EC
WARNING: TOREDUCETHERISKOFFIREORELECTRICSHOCK,DONOTEXPOSETHISPRODUCT
TO RAIN OR MOISTURE.
ENGLISH - 7
Read this rst!
WARNING: RISKOFELECTRICSHOCK.DON’TOPEN
Indicated on the projector
Thelightningashwitharrowheadsymbol,withinanequilateraltriangle,isintendedtoalertthe
usertothepresenceofuninsulated“dangerousvoltage”withintheproduct’senclosurethatmay
beofsucientmagnitudetoconstituteariskofelectricshocktopersons.
Theexclamationpointwithinanequilateraltriangleisintendedtoalerttheusertothepresenceof
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
WARNING: Donotlookatthelightemittedfromthelenswhiletheprojectorisbeingused.
Aswithanybrightsource,donotstareintothedirectbeam,RG2IEC62471-5:2015.
Indicated on the projector
(for USA and Canada)
WARNING: MOUNTABOVETHEHEADSOFCHILDREN.
Theuseofaceilingmountisrecommendedwiththisprojectortoplaceitabovetheeyesof
children.
Laser Notice No.57
Notice on laser
(except for Taiwan, India)
ThisprojectoristheClass1laserproductthatcomplieswithIEC/EN60825-1:2014.
DPQT1359ZA
DANGER-
CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE OR
SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION
DANGER-
RAYONNEMENT LASER DE CLASSE 4 - EN CAS D'OUVERTURE
EXPOSITION DANGEREUSE AU RAYONNEMENT DIRECT OU
DIFFUS DES YEUX OU DE LA PEAU
(Inside of product)
8 - ENGLISH
Read this rst!
(for Taiwan)
ThisprojectoristheClass1laserproductthatcomplieswithIEC/EN60825-1:2014.
第1類雷射產品
(for India)
ThisprojectoristheClass1laserproductthatcomplieswithIEC/EN60825-1:2014.
CAUTION: Useofcontrolsoradjustmentsorperformanceofproceduresotherthanthosespeciedherein
mayresultinhazardousradiationexposure.
CAUTION (North/Middle/South America)
Power Supply: ThisProjectorisdesignedtooperateon100V-240V,50Hz/60HzAC,housecurrentonly.
CAUTION: TheACpowercordwhichissuppliedwiththeprojectorasanaccessorycanonlybeusedfor
powersuppliesupto125V.Ifyouneedtousehighervoltagesthanthis,youwillneedtoobtaina
separate250Vpowercord.Ifyouusetheaccessorycordinsuchsituations,remayresult.
CAUTION (North/Middle/South America, Taiwan)
This equipment is equipped with a three-pin grounding-type power plug. Do not
removethegroundingpinonthepowerplug.Thisplugwillonlytagrounding-type
poweroutlet.Thisisasafetyfeature.Ifyouareunabletoinserttheplugintothe
outlet,contactanelectrician.Donotdefeatthepurposeofthegroundingplug.
Do not remove
ENGLISH - 9
Read this rst!
WARNING (USA and Canada)
fNotforuseinacomputerroomasdenedintheStandardfortheProtectionofElectronicComputer/Data
ProcessingEquipment,ANSI/NFPA75.
fForpermanentlyconnectedequipment,areadilyaccessibledisconnectdeviceshallbeincorporatedinthe
buildinginstallationwiring.
fForpluggableequipment,thesocket-outletshallbeinstalledneartheequipmentandshallbeeasilyaccessible.
NOTIFICATION (Canada)
This class A digital apparatus complies with Canadian ICES-003.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.
Seewww.dtsc.ca.gov/hazardouswaste/perchlorate
For Australia Only
WARNING: THIS PRODUCT CONTAINS A COIN BATTERY
Keepcoinbatteryoutofthereachofinfantsandsmallchildrenwhetherthebatteryisneworused.
Severeorfatalinjuriescanoccurwithin2hoursofingestion.Seekmedicalattentionimmediately.
EU Declaration of Conformity (DoC) for RE Directive
This equipment is in compliance with the essential requirements and other relevant provisions of Directive
2014/53/EU.
CustomerscandownloadacopyoftheoriginalDoCforthisproductfromourDoCserver:
https://www.ptc.panasonic.eu/
ContactintheEU:PanasonicConnectEuropeGmbH,PanasonicTestingCentre,Winsbergring15,22525
Hamburg,Germany
10 - ENGLISH
Read this rst!
FCC NOTICE (USA)
Supplier’s Declaration of Conformity
ModelNumber: PT-REQ12B/PT-REQ12W/PT-REQ12LB/PT-REQ12LW/PT-REQ12LBUG/
PT-REQ12BE/PT-REQ12WE/PT-REQ12LBE/PT-REQ12LWE
PT-REQ10B/PT-REQ10W/PT-REQ10LB/PT-REQ10LW/PT-REQ10LBUG/
PT-REQ10BE/PT-REQ10WE/PT-REQ10LBE/PT-REQ10LWE
PT-REQ80B/PT-REQ80W/PT-REQ80LB/PT-REQ80LW/PT-REQ80LBUG/
PT-REQ80BE/PT-REQ80WE/PT-REQ80LBE/PT-REQ80LWE
TradeName: Panasonic
ResponsibleParty: PanasonicCorporationofNorthAmerica
Address: TwoRiverfrontPlaza,Newark,NJ07102-5490
GeneralContact: http://www.panasonic.com/support
ProjectorContact: https://panasonic.net/cns/projector/
This device complies with Part 15 of the FCC Rules.
Operationissubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,
including interference that may cause undesired operation.
Caution:
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuanttopart
15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference
whentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcanradiate
radiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructionmanual,maycause
harmfulinterferencetoradiocommunications.Operationofthisequipmentinaresidentialareaislikelytocause
harmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceathisownexpense.
FCC Warning:
Toassurecontinuedcompliance,followtheattachedinstallationinstructions.Thisincludesusingtheprovided
powercordandshieldedinterfacecableswhenconnectingtocomputerorperipheraldevices.Also,any
unauthorizedchangesormodicationstothisequipmentcouldvoidtheuser’sauthoritytooperatethisdevice.
Este manual sirve para los siguientes modelos
9
Tabla de contenidos
Otros manuales de Proyector de Panasonic
Panasonic
Panasonic PT-LB50 Manual de usuario
Panasonic
Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform... Manual de usuario
Panasonic
Panasonic PT-FW100NT Manual de usuario
Panasonic
Panasonic PTLB80NTU - LCD PROJECTOR Manual de usuario
Panasonic
Panasonic PT-D7000E Manual de usuario
Panasonic
Panasonic AX200U - LCD Projector - HD 720p Manual de usuario
Panasonic
Panasonic PT-D5500 Manual del sistema
Panasonic
Panasonic PT-VW340Z Manual de usuario
Panasonic
Panasonic PT-LB10S Manual del sistema
Panasonic
Panasonic PT-LM2U Manual de usuario
Panasonic
Panasonic PT-FRQ60 Manual de usuario
Panasonic
Panasonic PT-DW730EL Instrucciones de funcionamiento
Panasonic
Panasonic PT-SRQ35KC Manual de usuario
Panasonic
Panasonic PT-DW530U Manual de usuario
Panasonic
Panasonic PT-DW5100EL Manual de usuario
Panasonic
Panasonic PT-D10000U Manual de usuario
Panasonic
Panasonic PTLC56U - LCD PROJECTOR Manual de usuario
Panasonic
Panasonic PT-DZ21K2 Manual de usuario
Panasonic
Panasonic PT-VX410Z Manual de usuario
Panasonic
Panasonic PT-VMZ50 Manual de usuario
