Panasonic PT-MZ770 Instrucciones de funcionamiento

Thank you for purchasing this Panasonic product.

■This manual is common to all the models regardless of sufxes of the Model No.

zfor India

D: White model, the standard zoom lens supplied

zfor Asia (except for Taiwan, Korea) / Oceania

A: White model, the standard zoom lens supplied LA: White model, the lens sold separately

zfor Taiwan

A: White model, the standard zoom lens supplied

zfor Korea

Without L: White model, the standard zoom lens supplied

With L: White model, the lens sold separately (PT-MZ770L only)

zfor other countries or regions

Without L / LB: White model, the standard zoom lens supplied With L: White model, the lens sold separately

With LB: Black model, the lens sold separately (PT-MZ770LB only)

■Before operating this product, please read the instructions carefully and save this manual

for future use.

■Before using this product, be sure to read “Read this rst!” (xpages 5 to 15).

DPQP1224ZB/X1

LCD Projector Commercial Use

Operating Instructions

Functional Manual

ENGLISH

Model No. PT-MZ770

 PT-MW730

2 - ENGLISH

Contents

Read this rst! 5

Chapter 1 Preparation

Precautions for use 20

Intended use of the product 20

Lens protection material 20

Cautions when transporting 20

Cautions when installing 20

Security 23

Notes regarding the wireless LAN 23

Light ID 24

DIGITAL LINK 25

Application software supported by the projector

Storing 26

Disposal 26

Cautions on use 26

Accessories 27

Optional accessories 28

About your projector 29

Remote control 29

Projector body 31

Preparing the remote control 34

Inserting and removing the batteries 34

When using the multiple projectors 34

Connecting the remote control to the projector

with a cable 34

Chapter 2 Getting Started

Setting up 36

Installation mode 36

Parts for installation (optional) 37

Projected image and throw distance 38

Adjusting adjustable feet 48

Removing/attaching the projection lens 49

Removing the projection lens 49

Attaching the projection lens 50

Attaching the Wireless Module 51

Connecting 52

Before connecting 52

Connecting example: AV equipment 53

Connecting example: Computers 54

Connecting example using DIGITAL LINK 55

Chapter 3 Basic Operations

Switching on/off the projector 58

Connecting the power cord 58

Power indicator 59

Switching on the projector 60

When the initial setting screen is displayed 61

Making adjustments and selections 65

Switching off the projector 66

Projecting 67

Selecting the input signal 67

Adjusting the focus, zoom, and lens shift 68

Moving the lens position to the home position 69

Adjustment range by the lens position shift

(optical shift) 69

Using the USB memory 70

Notes on use 70

USB memory that can be used with the

projector 70

Attaching the USB memory 70

Removing the USB memory 71

Operating with the remote control 72

Using the shutter function 72

Using the mute function 72

Adjusting the volume 73

Using the freeze function 73

Using the on-screen display function 73

Using the automatic setup function 74

Using the screen adjustment function 74

Using the digital zoom function 75

Switching the image aspect ratio 76

Using the presentation timer function 76

Using the function button 76

Displaying internal test pattern 76

Using the status function 77

Using the ECO management function 77

Setting ID number of the remote control 77

Chapter 4 Settings

Menu navigation 80

Navigating through the menu 80

Main menu 81

Sub-menu 82

ENGLISH - 3

Contents

[PICTURE] menu 85

[PICTURE MODE] 85

[CONTRAST] 85

[BRIGHTNESS] 85

[COLOR] 86

[TINT] 86

[COLOR TEMPERATURE] 86

[GAMMA] 87

[DAYLIGHT VIEW] 88

[SHARPNESS] 88

[NOISE REDUCTION] 88

[DYNAMIC CONTRAST] 89

[SYSTEM SELECTOR] 89

[POSITION] menu 91

[SHIFT] 91

[ASPECT] 91

[ZOOM] 92

[CLOCK PHASE] 93

[REALTIME KEYSTONE] 93

[SCREEN ADJUSTMENT] 94

[ADVANCED MENU] menu 97

[DIGITAL CINEMA REALITY] 97

[BLANKING] 97

[INPUT RESOLUTION] 98

[CLAMP POSITION] 98

[RASTER POSITION] 98

[DISPLAY LANGUAGE] menu 99

Changing the display language 99

[DISPLAY OPTION] menu 100

[COLOR ADJUSTMENT] 100

[COLOR CORRECTION] 100

[SCREEN SETTING] 101

[AUTO SIGNAL] 101

[AUTO SETUP] 101

[RGB IN] 102

[HDMI IN] 103

[DIGITAL LINK IN] 105

[ON-SCREEN DISPLAY] 106

[CLOSED CAPTION SETTING] (only when

NTSC signal is input) 108

[SIGNAL SEARCH] 109

[BACK COLOR] 109

[STARTUP LOGO] 110

[SHUTTER SETTING] 110

[P-TIMER] 111

[FREEZE] 112

[DIGITAL ZOOM] 112

[PROJECTOR SETUP] menu 113

[PROJECTOR ID] 113

[PROJECTION METHOD] 113

[ECO MANAGEMENT] 114

[LightID] 116

[INITIAL STARTUP] 117

[STARTUP INPUT SELECT] 117

[DATE AND TIME] 118

[SCHEDULE] 119

[RS-232C] 120

[REMOTE1 MODE] 122

[FUNCTION BUTTON] 122

[LENS CALIBRATION] 122

[AUDIO SETTING] 123

[FILTER COUNTER] 125

[DC OUT] 126

[STATUS] 126

[DATA CLONING] 127

[SAVE ALL USER DATA] 130

[LOAD ALL USER DATA] 130

[INITIALIZE] 131

[SERVICE PASSWORD] 131

[TEST PATTERN] menu 132

[TEST PATTERN] 132

[SIGNAL LIST] menu 133

Registering new signals 133

Renaming the registered signal 133

Deleting the registered signal 133

Protecting the registered signal 134

Expanding signal lock-in range 134

Sub memory 135

[SECURITY] menu 136

[SECURITY PASSWORD] 136

[SECURITY PASSWORD CHANGE] 136

[DISPLAY SETTING] 136

[TEXT CHANGE] 137

[MENU LOCK] 137

[MENU LOCK PASSWORD] 137

[CONTROL DEVICE SETUP] 138

[CONTROL DEVICE PASSWORD CHANGE]

139

4 - ENGLISH

Contents

[NETWORK/USB] menu 140

[DIGITAL LINK MODE] 140

[DIGITAL LINK STATUS] 140

[DIGITAL LINK MENU] 141

[WIRED LAN] 141

[WIRELESS LAN] 142

[PROJECTOR NAME] 146

[NETWORK CONTROL] 146

[MEMORY VIEWER] 146

[Panasonic APPLICATION] 148

[MIRRORING] 150

[NETWORK STATUS] 151

Chapter 5 Operations

Network connection 154

Connecting via wired LAN 155

Connecting with the wireless LAN 157

Web control function 159

Computer that can be used for setting 159

Accessing from the web browser 159

Projecting with Panasonic APPLICATION input

179

Application that can be used 179

Connecting the device 179

Ending the connection with the device 179

Description of the standby screen 180

Using the moderator mode in the Panasonic

APPLICATION input 181

Projecting with MIRRORING input 182

Connecting the device 182

Ending the connection with the device 183

Using the moderator mode in the MIRRORING

input 183

Operating with the web browser 184

Description of the [MODERATOR MODE] page

185

Projecting with MEMORY VIEWER input 186

Images that can be played back with the

Memory Viewer function 186

Displaying the Memory Viewer screen 187

Operating the Memory Viewer screen 187

Playing back still images 189

Playing back movies 190

Description of the Memory Viewer screen 193

Playing back using the contents list 194

Using the pairing function 195

Pairing the USB memory 195

Chapter 6 Maintenance

Light source/temperature/lter indicators 198

When an indicator lights up 198

Maintenance/replacement 200

Before performing maintenance/replacement 200

Maintenance 200

Replacing the unit 202

Troubleshooting 204

FAQ 206

Wireless LAN connection 206

Mirroring connection 206

[SELF TEST] display 208

Chapter 7 Appendix

Technical information 2 11

PJLink protocol 211

Control commands via LAN 212

<SERIAL IN> terminal 215

<REMOTE 1 IN> terminal 219

Operating [MENU LOCK PASSWORD] 219

List of compatible signals 220

Specications 223

Dimensions 228

Precautions for attaching the Ceiling Mount

Bracket 229

Index 231

ENGLISH - 5

Read this rst!

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture.

This device is not intended for use in the direct eld of view at visual display workplaces. To avoid

incommoding reexions at visual display workplaces this device must not be placed in the direct

eld of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied

service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-

type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are

unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the

earthing plug.

WARNING:

This equipment is compliant with Class A of CISPR32.

In a residential environment this equipment may cause radio interference.

(for Taiwan)

WARNING:

This equipment complies with the Class A standard of CISPR32.

This is Class A information technology equipment that may cause radio frequency interference when used in a

residential environment, in which the user will be required to take certain appropriate countermeasures.

CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using

the provided power cord and shielded interface cables when connecting to computer or peripheral

devices. Also, any unauthorized changes or modications to this equipment could void the user’s

authority to operate this device.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a

domestic environment.

Directive 2009/125/EC

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN

Indicated on the projector

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

6 - ENGLISH

Read this rst!

WARNING: Do not look at the light emitted from the lens while the projector is being used.

As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015.

Indicated on the projector

Notice on laser

(for USA and Canada)

This projector is the Class 3R laser product that complies with IEC 60825-1:2007.

DPQT1359ZA

DANGER-

CLASS 4 LASER RADIATION WHEN OPEN AVOID EYE OR

SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION

DANGER-

RAYONNEMENT LASER DE CLASSE 4 - EN CAS D'OUVERTURE

EXPOSITION DANGEREUSE AU RAYONNEMENT DIRECT OU

DIFFUS DES YEUX OU DE LA PEAU

(Inside of product)

Indicated on the projector

(for India)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

ENGLISH - 7

Read this rst!

(for other countries or regions)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein

may result in hazardous radiation exposure.

CAUTION (North/Middle/South America/Taiwan)

Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for

power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a

separate 250 V power cord. If you use the accessory cord in such situations, re may result.

CAUTION (North/Middle/South America/Taiwan)

This equipment is equipped with a three-pin grounding-type power plug. Do not

remove the grounding pin on the power plug. This plug will only t a grounding-type

power outlet. This is a safety feature. If you are unable to insert the plug into the

outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the

building installation wiring.

fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

8 - ENGLISH

Read this rst!

FCC NOTICE (USA)

Supplier’s Declaration of Conformity

Model Number: PT-MZ770 / PT-MZ770L / PT-MZ770LB / PT-MW730 / PT-MW730L

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America

Address: Two Riverfront Plaza, Newark, NJ 07102-5490

General Contact: http://www.panasonic.com/support

Projector Contact: https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided

power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any

unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

ENGLISH - 9

Read this rst!

IMPORTANT: THE MOLDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse

is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating

of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you

lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover

can be purchased from an Authorized Service Center.

If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be

removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the

cut off plug is inserted into any 13 amp socket.

If a new plug is to be tted, please observe the wiring code as shown below.

If in any doubt, please consult a qualied electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are colored in accordance with the following code:

Green - and - Yellow: Earth

Blue: Neutral

Brown: Live

As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings

identifying the terminals in your plug, proceed as follows.

The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug

which is marked with the letter E or by the Earth symbol or colored GREEN or GREEN - AND -

YELLOW.

The wire which is colored BLUE must be connected to the terminal in the plug which is marked

with the letter N or colored BLACK.

The wire which is colored BROWN must be connected to the terminal in the plug which is marked

with the letter L or colored RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

10 - ENGLISH

Read this rst!

Hazard distance (IEC 62471-5:2015)

The distance at which the level of exposure has reached the level of the applicable Exposure Limit Value is known

as the hazard distance (HD) or safety distance.

Do not look into the projected light from inside the hazard distance (within RG3 range). The eyes may be damaged

by the direct irradiation. It is considered to be safe to look into the projected light from outside the hazard distance

(within RG2 range).

RG2

RG3

RG2

RG3

(Unit: m)

Lens HD*1 D1*2 D2*2 D3*2 D4*2

ET-ELW21

< 1.0

0.97 0.97 1.13 1.13

ET-ELW22 0.89 0.89 1.03 1.03

ET-ELW20 0.62 0.62 0.72 0.72

Standard Zoom Lens/

ET-ELS20 0.47 0.47 0.55 0.55

ET-ELT22 0.29 0.29 0.34 0.34

ET-ELT23 0.19 0.19 0.23 0.23

*1 HD: Hazard Distance

*2 D1, D2, D3, and D4 change in accordance with projection lens shift amount. Each value in this table represents the maximum range.

Note

fThe values in the table comply with IEC 62471-5:2015.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Panasonic

Panasonic

Panasonic PTP1SDU - LCD PROJECTOR Manual de usuario

Panasonic

Panasonic PT_AT6000E Manual de usuario

Panasonic

Panasonic PT-VMZ51 Manual de usuario

Panasonic

Panasonic PT-L6510U Manual de usuario

Panasonic

Panasonic PT-LZ370U Manual de usuario

Panasonic

Panasonic PTLB20VU-EC Operating Manual de usuario

Panasonic

Panasonic PT-RZ870LBEJ Manual de usuario

Panasonic

Panasonic PT-VW535N Manual de usuario

Panasonic

Panasonic PT-D6000K Manual de usuario

Panasonic

Panasonic PT-AX100E Manual de usuario

Panasonic

Panasonic PTLB20NTU - PROJECTOR- NETWORK IB Manual de usuario

Panasonic

Panasonic PTLC80U - LCD PROJECTOR Manual de usuario

Panasonic

Panasonic PT-AR100EH Instrucciones de funcionamiento

Panasonic

Panasonic PT-AE900U Manual de usuario

Panasonic

Panasonic PTLC76U - LCD PROJECTOR Manual de usuario

Panasonic

Panasonic PTL595U - LCD PROJECTOR Manual de usuario

Panasonic

Panasonic PT-DW730EL Instrucciones de funcionamiento

Panasonic

Panasonic PTL6600U - LCD PROJECTOR Manual de usuario

Panasonic

Panasonic PT-DZ10K Manual del sistema

Panasonic

Panasonic PT-VW330U Instrucciones de instalación

Panasonic

Panasonic PT-AT5000 Manual de usuario

Panasonic

Panasonic PT-JW130FWU Manual de usuario

Panasonic

Panasonic PT PT-D5000ULS Manual de usuario

Panasonic

Panasonic PT-VW340za Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario