Panasonic ET-DLE035C Manual de usuario
ENGLISH
Model No. ET-DLE035C
DPQX1335ZB/X1
Fixed-Focus Lens
Operating Instructions
Thank you for purchasing this Panasonic product.
■To ensure correct use of this lens, please read the operating instructions supplied
with the lens and the projector carefully.
■Before using this product, be sure to read “Read this rst!” (Page 3).
■Please save this manual for future use.
Commercial Use
2-ENGLISH
Read this rst! ......................................................................................3
Before Use.............................................................................................4
Attaching the Lens / Detaching the Lens...........................................4
Before replacing the projection lens........................................................ 4
Attaching the Lens................................................................................... 5
Detaching the Lens ................................................................................. 6
Projection relationships.......................................................................7
Lens position setup and focus adjustment .......................................9
Lens position setup ................................................................................. 9
Focus Adjustment Function................................................................... 12
Specications .....................................................................................13
Dimensions .........................................................................................13
Dimensional relationship......................................... 附表 / Appendix 1
█ Contents
ENGLISH-3
Read this rst! Always follow these precautions
WARNING:
Do not look at or place your skin into the light emitted from the lens while the
projector is being used.
Doing so can cause burns or loss of sight.
zStrong light is emitted from the projector’s lens. Do not look at or place your hands
directly into this light.
zTurn o the power when moving away from the projection lens or projector.
Do not project an image with the lens cover attached.
zDoing so can cause re.
CAUTION:
Before replacing the projection lens, be sure to turn o the power and
disconnect the power plug from the wall outlet.
zUnexpected projection of light may cause injury to eyes.
zReplacing the projection lens without removing the power plug may result in electric
shock.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
zStrong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re, damage to the object, or malfunction of the lens and
projector.
zStrong light is emitted from the projector’s lens.
Do not open the desiccant bag. Do not eat the contents.
Inadvertently ingesting desiccant could be harmful.
zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water
and seek medical attention.
zKeep desiccant out of the reach of children.
4-ENGLISH
Before replacing the projection lens
Return the projection lens to the home position before replacing or removing it.
For details on how to return the lens to the home position, refer to the operating
instructions of the projector.
Attention
zMake sure that the projector power supply is switched o before attaching or detaching the
projection lens.
zAfter removing the projection lens, store it safely away from vibration or impacts.
zDo not touch the electric contact points of the projection lens with your ngers. Dust and
dirt on the contacts may cause contact malfunctions.
zBefore attaching the Fixed-focus lens, remove the protective lm from the light projecting
surface and the lens cap from the lens.
Lens surface Light
projecting
surface
Lens cap
Protective lm
Attaching the Lens / Detaching the Lens
Before Use
Supported projectors
PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C / PT-FRZ78C /
PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ97C / PT-FDW93C / PT-FDX110C /
PT-FDZ88C / PT-FDW85C / PT-FDX92C / PT-FD605CB / PT-FD601C
Note
zModels other than the above may also be supported. Refer to the operating instructions of
the projector you are using.
zIn this document, the alphabet letters at the end of the projector part numbers are omitted.
Supplied Accessories
Make sure that the following has been provided. Numbers enclosed in < > show the
number of accessories.
Lens cap <1> Lens shift gauge <1>
(The product is
delivered with a
lens cap attached.)
ENGLISH-5
1) With this lens already passed
through the lens mount cover that
came with your projector, align the
positioning guide with the guide
groove on the projector, and insert
the lens fully.
zThere is a red dot at the bottom right
end of the positioning guide.
2) Turn the xed-focus lens clockwise
until you hear a click.
3) Attach the lens mount cover to the
projector.
zTurn the lens mount cover clockwise
to x it in place.
Attention
zGently turn the projection lens
counterclockwise to check that it will not
fall out.
Attaching the Lens
Attaching the Lens / Detaching the Lens (continued)
zBe sure not to touch the light projecting surface or the surface of the lens. Any ngerprints
or smudges on these surfaces will be magnied and lower the quality of the image
displayed on the screen.
zThe light projecting surface and lens are made of glass. The lens could be damaged if
brought into contact with or rubbed against hard objects. Handle the lens carefully.
zUse a clean, soft, and dry cloth to wipe away dust and dirt from the light projecting surface
and projection lens. Do not use uy cloths containing oil, water or dust for cleaning.
zWhen the Fixed-focus lens is removed from the projector, place it with the light projecting
surface facing downwards.
* Unless specied otherwise, the illustrations in these operating instructions show the lens used
with the PT-FDZ97C projector.
Guide groove
Lens mount cover
Positioning guide
Fixed-focus lens
6-ENGLISH
Attaching the Lens / Detaching the Lens (continued)
B
A
Lens mount cover
A
C
B
Lens release
button
1) Turn the lens mount cover
counterclockwise to detach it from
the lens and slide it towards the
front end of the lens.
2) Hold down the lens release
button while turning the lens
counterclockwise to release it.
3) Turn the lens mount cover
clockwise to reattach it.
Attention
zAttach the supplied lens cap before
storing the lens.
Detaching the Lens
ENGLISH-7
The dimensional relationship between the screen and the projector is shown below.
Dimensional relationship diagram
SH
SW
SD
SH
A1
L3
L4
A2
L1
L2
Projected image
Screen
Note
zThe indications of this illustration are premised on aligning the projected image size and position
to the full screen.
zThis illustration is not drawn to scale.
SH Projected image height L3 Screen to projector front end
SW Projected image width L4 Screen to projector rear end
SD Diagonal length of the projected image A1 Bottom edge of the screen to the top of
the projector
L1 Projection distance
(from screen to mirror reective surface*) A2 Bottom edge of the screen to the bottom
of the projector
L2 Screen to lens front end
* The mirror reective surface is inside the xed-focus lens, and is not visible from the outside.
Note
zThe illustrations of projectors in this manual are for informational purposes only and do not
represent a specic projector model. Congurations may vary with the model.
zDimension L4 is the distance from the projector rear panel to the screen.
zDimension A2 is the distance from the bottom edge of the screen to the bottom of the
adjustable projector legs (with the legs fully screwed in).
Attention
zDimension L4 is not the distance from the projector rear panel to a wall, but the distance
from the projector rear panel to the screen. To prevent obstruction of the intake and
exhaust vents, install the projector with a clearance at least 500 mm (19-11/16") from walls
and objects.
When placing the projector in a conned space, a ventilation and/or air conditioning system
is required.
Exhaust heat may accumulate when the ventilation is not sucient triggering the protection
circuit of the projector.
zAvoid setting up in places which are subject to sudden temperature changes, such as near
an air conditioner or lighting equipment (studio lamps, etc.).
Projection relationships
8-ENGLISH
Projection relationships (continued)
zWhen using one of
PT-FDW93C / PT-FDX110C / PT-FDZ88C / PT-FDW85C / PT-FDX92C /
PT-FD605CB / PT-FD601C
If keystone distortion in vertical direction or horizontal direction is corrected, the projected
image overall will no longer be in focus. Set up the projector so that the projected image is
rectangular and the back of the projector and the screen are parallel.
zWhen using a projector other than one listed above
Please see "Setting up" in the operating instructions for the projector you are using.
Dimensional relationship
zWhen using one of
PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C /
PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ97C / PT-FDW93C /
PT-FDX110C / PT-FDZ88C / PT-FDW85C / PT-FDX92C / PT-FD605CB / PT-FD601C
For details on projection distance (L1), and A1, A2, L2, L3 and L4 values, refer to "Projected
image size and Projection distance" or "Projection distance formulas" in the Appendix.
zWhen using a projector other than one listed above
Please see "Setting up" in the operating instructions for the projector you are using.
Keystone distortion correction
When attaching this lens for use, regardless of the projector model, set up the projector
so that the projected image is rectangular and the back of the projector and the screen
are parallel. In addition, depending on the projector used, keystone distortion correction
may be feasible after setup.
zWhen using one of PT-FRZ120C / PT-FRZ98C / PT-FRW93C / PT-FRX110C /
PT-FRZ88C / PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C /PT-FDZ97C
For keystone distortion in the vertical direction generated within the angle range
below, select [MAIN MENU] → [POSITION] → [GEOMETRY] / [GEOMETRY(2D)] →
[KEYSTONE] → [VERTICAL KEYSTONE] to perform correction.
Keystone distortion in the vertical direction greater than this angle and keystone
distortion in the horizontal direction can be corrected but the projected image overall
will no longer be in focus.
Correction feasible angle (α): 0 - 5°
α
Screen
(Side view)
ENGLISH-9
Lens position setup and focus adjustment
Lens position setup
zWhen using PT-FRZ120C
When moving the lens position to the home position, perform the operation with the
following procedure.
1) Turn on the projector to start the
projection.
2) Press the < 菜单 >button to display
the [MAIN MENU] screen.
3) Select [PROJECTOR SETUP] in
the main menu and then press the
<执行 > button.
4) Select [LENS] in the [PROJECTOR
SETUP] menu and then press the
<执行 > button.
zThe [LENS] screen appears.
5) Select [LENS TYPE] on the [LENS]
screen and then use the
◄►
buttons to select [ET-DLE035].
zEach press of the
◄►
buttons
switches the item to [NORMAL] or
[ET-DLE035].
6) Select [LENS HOME POSITION] on
the [LENS] screen and then press
the < 执行 >button.
z A conrmation screen appears.
7) Use the
◄►
buttons to select [OK]
and then press the < 执行 > button.
z[PROGRESS] is displayed on the
[HOME POSITION] screen and the
projection lens moves to the home
position.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
1/2
执行
1/2
MENU SELECT
SUB MENU
执行
PROJECTOR SETUP
PROJECTOR ID ALL
PROJECTION METHOD
LENS
OPERATION SETTING NORMAL
LIGHT OUTPUT 100.0%
BRIGHTNESS CONTROL AUTO
STANDBY MODE NORMAL
QUICK STARTUP OFF
NO SIGNAL SHUT-OFF DISABLE
NO SIGNAL LIGHTS-OUT DISABLE
MENU SELECT
CHANGE
LENS
LENS TYPE NORMAL
LENS HOME POSITION
LENS CALIBRATION
Note
zIf [LENS TYPE] is mistakenly set to [NORMAL], the projection lens will not move to the
correct home position.
10-ENGLISH
Lens position setup and focus adjustment (continued)
zWhen using one of PT-FRZ98C / PT-FRW93C / PT-FRX110C / PT-FRZ88C /
PT-FRZ78C / PT-FRW73C / PT-FRZ67C / PT-FRW62C / PT-FDZ88C / PT-FDW85C /
PT-FDX92C / PT-FD605CB / PT-FD601C
When moving the lens position to the lens standard position, perform the operation with
the following procedure.
1) Turn on the projector to start the
projection.
2) Press the < 移位 > button on the
remote control.
zThe shift adjustment screen appears.
3) Press the < 默认 > button on the
remote control while the shift ad-
justment screen is displayed.
zThe [HOME POSITION] screen
appears.
4) Use the
◄►
buttons to select
[ET-DLE030].
zEach press of the
◄►
buttons
switches the item to [NORMAL] or
[ET-DLE030].
5) Press the < 执行 > button.
z[PROGRESS] is displayed on the
[HOME POSITION] screen and
the lens position moves to the lens
standard position for ET-DLE035C.
HOME POSITION
ADJUST
默认
LENS
SHIFT
VERTICAL POSITION
HORIZONTAL POSITION
LENS
CANCEL
CHANGE
EXECUTE 菜单
执行
HOME POSITION NORMAL
Tabla de contenidos
Otros manuales de Lente de Panasonic
Panasonic
Panasonic ET-DLE020C Manual de usuario
Panasonic
Panasonic ET-ELT30C Manual de usuario
Panasonic
Panasonic ET-EMW200 Manual de usuario
Panasonic
Panasonic H-HSA35100PP Manual de usuario
Panasonic
Panasonic H-PS14042PP Manual de usuario
Panasonic
Panasonic Lumix H-ES200 Manual de usuario
Panasonic
Panasonic WV-LZF61/2 Manual de usuario
Panasonic
Panasonic Lumix H-ES12060 Guía de instalación
Panasonic
Panasonic H-FS14140PP Manual de usuario
Panasonic
Panasonic H-RS100400PP Manual de usuario
Panasonic
Panasonic ET-D75LE95C Manual de usuario
Panasonic
Panasonic VW-CLT1P Manual de usuario
Panasonic
Panasonic ET-PLF10 Manual de usuario
Panasonic
Panasonic ET-D3QW300 Manual de usuario
Panasonic
Panasonic VW-W4907 Manual de usuario
Panasonic
Panasonic AW-S14XBRM Manual de usuario
Panasonic
Panasonic ET-DLE060C Manual de usuario
Panasonic
Panasonic ET-DLE085C Manual de usuario
Panasonic
Panasonic ET-D3LEU100C Manual de usuario
Panasonic
Panasonic ET-DLE105C Manual de usuario
Manuales populares de Lente de otras marcas
FujiFilm
FujiFilm FUJINON ZA17x7.6BERD-S6 Manual de usuario
Navitar
Navitar 1-51332 Guía
Leica
Leica APO-SUMMICRON-SL 1:2/50 ASPH. Manual de usuario
Sony
Sony LKRL-Z200 Series Manual de usuario
Cosina
Cosina Voigtländer SUPER NOKTON 29mm F0.8... Manual de usuario
Arax
Arax PCS ARSAT H(K) 4.5/55 Manual de usuario
