Panasonic ET-DLE035 Manual de usuario

ENGLISH

DPQX1334ZA/X1

Model No. ET-DLE035

Fixed-Focus Lens 　　　　　　　　　

Operating Instructions

Thank you for purchasing this Panasonic product.

■To ensure correct use of this lens, please read the operating instructions supplied with the lens and the

projector carefully.

■Before using this product, be sure to read “Read this rst!” (Page 3).

■Please save this manual for future use.

Product information (for Turkey only)

 EEEYönetmeliğineUygundur.

EEE Complies with Directive of Turkey.

Commercial Use

2-ENGLISH

Read this rst! ......................................................................................3

Before Use.............................................................................................4

Attaching the Lens / Detaching the Lens...........................................4

Before replacing the projection lens........................................................ 4

Attaching the Lens................................................................................... 5

Detaching the Lens ................................................................................. 6

Projection relationships.......................................................................7

Lens position setup and focus adjustment .......................................9

Lens position setup ................................................................................. 9

Focus Adjustment Function................................................................... 12

Specications .....................................................................................13

Dimensions .........................................................................................13

Dimensional relationship.......................Appendix / Annexe / 付録 1

The "Appendix" can be found after the Japanese language section ( 日本語 ).

█ Contents

ENGLISH-3

Read this rst! Always follow these precautions

WARNING:

Do not look at or place your skin into the light emitted from the lens while the

projector is being used.

Doing so can cause burns or loss of sight.

zStrong light is emitted from the projector’s lens. Do not look at or place your hands

directly into this light.

zTurn off the power when moving away from the projection lens or projector.

Do not project an image with the lens cover attached.

zDoingsocancausere.

CAUTION:

Before replacing the projection lens, be sure to turn off the power and

disconnect the power plug from the wall outlet.

zUnexpectedprojectionoflightmaycauseinjurytoeyes.

zReplacing the projection lens without removing the power plug may result in electric

shock.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

zStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doingsocancausere,damagetotheobject,ormalfunctionofthelensand

projector.

zStrong light is emitted from the projector’s lens.

Do not open the desiccant bag. Do not eat the contents.

Inadvertently ingesting desiccant could be harmful.

zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water

and seek medical attention.

zKeep desiccant out of the reach of children.

4-ENGLISH

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating instructions of the projector.

Attention

zMake sure that the projector power supply is switched off before attaching or detaching the projection lens.

zAfter removing the projection lens, store it safely away from vibration or impacts.

zDonottouchtheelectriccontactpointsoftheprojectionlenswithyourngers.Dustanddirtonthecontacts

may cause contact malfunctions.

zBeforeattachingtheFixed-focuslens,removetheprotectivelmfromthelightprojectingsurfaceandthelens

cap from the lens.

Lens surface Light

projecting

surface

Lens cap

Protectivelm

zBesurenottotouchthelightprojectingsurfaceorthesurfaceofthelens.Anyngerprintsorsmudgeson

thesesurfaceswillbemagniedandlowerthequalityoftheimagedisplayedonthescreen.

zThe light projecting surface and lens are made of glass. The lens could be damaged if brought into contact

with or rubbed against hard objects. Handle the lens carefully.

zUseaclean,soft,anddryclothtowipeawaydustanddirtfromthelightprojectingsurfaceandprojectionlens.

Donotuseuffyclothscontainingoil,waterordustforcleaning.

zWhen the Fixed-focus lens is removed from the projector, place it with the light projecting surface facing

downwards.

Attaching the Lens / Detaching the Lens

Before Use

 Supported projectors

PT-RZ120 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 /

PT-DZ870 / PT-DW830 / PT-DX100 / PT-DZ780 / PT-DW750 / PT-DX820

Note

zModels other than the above may also be supported. Refer to the operating instructions of the projector you are using.

zIn this document, the alphabet letters at the end of the projector part numbers are omitted.

 Supplied Accessories

Make sure that the following has been provided. Numbers enclosed in < > show the number of accessories.

Lens cap <1> Lens shift gauge <1>

(The product is

delivered with a lens

cap attached.)

ENGLISH-5

Guide groove

Lens mount cover

Positioning guide

Fixed-focus lens

1) With this lens already passed

through the lens mount cover that

came with your projector, align the

positioning guide with the guide

groove on the projector, and insert

the lens fully.

zThere is a red dot at the bottom right end of the

positioning guide.

2) Turn the xed-focus lens clockwise

until you hear a click.

3) Attach the lens mount cover to the

projector.

zTurnthelensmountcoverclockwisetoxitin

place.

Attention

zGently turn the projection lens counterclockwise

to check that it will not fall out.

Attaching the Lens

Attaching the Lens / Detaching the Lens (continued)

*Unlessspeciedotherwise,theillustrationsintheseoperatinginstructionsshowthelensusedwiththe

PT-DZ870 projector.

6-ENGLISH

Lens mount cover

Lens release

button

1) Turn the lens mount cover

counterclockwise to detach it from

the lens and slide it towards the

front end of the lens.

2) Hold down the lens release

button while turning the lens

counterclockwise to release it.

3) Turn the lens mount cover

clockwise to reattach it.

Attention

zAttach the supplied lens cap before storing the lens.

Detaching the Lens

Attaching the Lens / Detaching the Lens (continued)

ENGLISH-7

The dimensional relationship between the screen and the projector is shown below.

 Dimensional relationship diagram

Projected image

Screen

Note

zThe indications of this illustration are premised on aligning the projected image size and position to the full screen.

zThis illustration is not drawn to scale.

SH Projected image height L3 Screen to projector front end

SW Projected image width L4 Screen to projector rear end

SD Diagonal length of the projected image A1 Bottom edge of the screen to the top of the

projector

L1 Projection distance

(fromscreentomirrorreective surface*)

A2 Bottom edge of the screen to the bottom of the

projector

L2 Screen to lens front end

*Themirrorreectivesurfaceisinsidethexed-focuslens,andisnotvisiblefromtheoutside.

Note

zTheillustrationsofprojectorsinthismanualareforinformationalpurposesonlyanddonotrepresentaspecic

projectormodel.Congurationsmayvarywiththemodel.

zDimension L4 is the distance from the projector rear panel to the screen.

zDimension A2 is the distance from the bottom edge of the screen to the bottom of the adjustable projector legs

(with the legs fully screwed in).

Attention

zDimension L4 is not the distance from the projector rear panel to a wall, but the distance from the projector

rear panel to the screen. To prevent obstruction of the intake and exhaust vents, install the projector with a

clearance at least 500 mm (19-11/16") from walls and objects.

 Whenplacingtheprojectorinaconnedspace,aventilationand/orairconditioningsystemisrequired.

 Exhaustheatmayaccumulatewhentheventilationisnotsufcienttriggeringtheprotectioncircuitofthe

projector.

● Avoidsettingupinplaceswhicharesubjecttosuddentemperaturechanges,suchasnearanairconditioner

orlightingequipment(studiolamps,etc.).

Projection relationships

8-ENGLISH

Projection relationships (continued)

zWhen using one of PT-DW830 / PT-DX100 / PT-DZ780 / PT-DW750 / PT-DX820

If keystone distortion in vertical direction or horizontal direction is corrected, the projected image overall will no

longer be in focus. Set up the projector so that the projected image is rectangular and the back of the projector

and the screen are parallel.

zWhen using a projector other than one listed above

Please see "Setting up" in the operating instructions for the projector you are using.

 Dimensional relationship

zWhen using one of PT-RZ120 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 /

PT-RW730 / PT-RZ660 / PT-RW620 / PT-DZ870 / PT-DW830 / PT-DX100 / PT-DZ780 /

PT-DW750 / PT-DX820

For details on projection distance (L1), and A1, A2, L2, L3 and L4 values, refer to "Projected image size and

Projection distance" or "Projection distance formulas" in the Appendix.

zWhen using a projector other than one listed above

Please see "Setting up" in the operating instructions for the projector you are using.

 Keystone distortion correction

When attaching this lens for use, regardless of the projector model, set up the projector so that the projected

image is rectangular and the back of the projector and the screen are parallel.

In addition, depending on the projector used, keystone distortion correction may be feasible after setup.

zWhen using one of PT-RZ120 / PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 / PT-RW730 /

PT-RZ660 / PT-RW620 /PT-DZ870

Forkeystonedistortionintheverticaldirectiongeneratedwithintheanglerangebelow,select[MAINMENU]

→[POSITION]→[GEOMETRY]/[GEOMETRY(2D)]→[KEYSTONE]→[VERTICALKEYSTONE]toperform

correction.

Keystone distortion in the vertical direction greater than this angle and keystone distortion in the horizontal

direction can be corrected but the projected image overall will no longer be in focus.

Correctionfeasibleangle(α):0-5°

Screen

(Side view)

ENGLISH-9

Lens position setup and focus adjustment

Lens position setup

zWhen using PT-RZ120

When moving the lens position to the home position, perform the operation with the following procedure.

1) Turn on the projector to start the

projection.

2) Press the <MENU> button to

display the [MAIN MENU] screen.

3) Select [PROJECTOR SETUP] in

the main menu and then press the

<ENTER> button.

4) Select [LENS] in the [PROJECTOR

SETUP] menu and then press the

<ENTER> button.

zThe[LENS]screenappears.

5) Select [LENS TYPE] on the [LENS]

screen and then use the

◄►

buttons to select [ET-DLE035].

zEach press of the

◄►

buttons switches the

itemto[NORMAL]or[ET-DLE035].

6) Select [LENS HOME POSITION] on

the [LENS] screen and then press

the <ENTER> button.

zAconrmationscreenappears.

7) Use the

◄►

buttons to select [OK]

and then press the <ENTER>

button.

z[PROGRESS]isdisplayedonthe[HOME

POSITION]screenandtheprojectionlens

moves to the home position.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

DISPLAY OPTION

PROJECTOR SETUP

TEST PATTERN

SIGNAL LIST

SECURITY

NETWORK

MENU SELECT

SUB MENU

ENTER

1/2

MENU SELECT

SUB MENU

PROJECTOR SETUP

PROJECTOR ID ALL

PROJECTION METHOD

LENS

OPERATION SETTING NORMAL

LIGHT OUTPUT 100.0%

BRIGHTNESS CONTROL AUTO

STANDBY MODE NORMAL

QUICK STARTUP OFF

NO SIGNAL SHUT-OFF DISABLE

NO SIGNAL LIGHTS-OUT DISABLE

ENTER

MENU SELECT

CHANGE

LENS

LENS TYPE NORMAL

LENS HOME POSITION

LENS CALIBRATION

Note

zIf[LENSTYPE]ismistakenlysetto[NORMAL],theprojectionlenswillnotmovetothecorrecthomeposition.

10-ENGLISH

Lens position setup and focus adjustment (continued)

zWhen using one of PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ870 / PT-RZ770 / PT-RW730 /

PT-RZ660 / PT-RW620 / PT-DZ780 / PT-DW750 / PT-DX820

When moving the lens position to the lens standard position, perform the operation with the following procedure.

1) Turn on the projector to start the

projection.

2) Press the <SHIFT> button on the

remote control.

zThe shift adjustment screen appears.

3) Press the <DEFAULT> button on

the remote control while the shift

adjustment screen is displayed.

zThe[HOMEPOSITION]screenappears.

4) Use the

◄►

buttons to select

[ET-DLE030].

zEach press of the

◄►

buttons switches the

itemto[NORMAL]or[ET-DLE030].

5) Press the <ENTER> button.

z[PROGRESS]isdisplayedonthe[HOME

POSITION]screenandthelensposition

moves to the lens standard position for

ET-DLE035.

HOME POSITION

ADJUST

DEFAULT

LENS

SHIFT

VERTICAL POSITION

HORIZONTAL POSITION

LENS

CANCEL

ENTER

CHANGE

EXECUTE

HOME POSITION NORMAL

Tabla de contenidos

Otros manuales de Lente de Panasonic

Panasonic

Panasonic ET-EMW200 Manual de usuario

Panasonic

Panasonic H-PS14042PP Manual de usuario

Panasonic

Panasonic Lumix H-FS14140 Manual de usuario

Panasonic

Panasonic ET-D3LEU100C Manual de usuario

Panasonic

Panasonic ET-D3LEF70 Manual de usuario

Panasonic

Panasonic VW-CLT1P Manual de usuario

Panasonic

Panasonic S-R24105MGK Manual de usuario

Panasonic

Panasonic H-FS14140PP Manual de usuario

Panasonic

Panasonic AW-S14XBRM Manual de usuario

Panasonic

Panasonic ET-D3LEW60 Manual de usuario

Panasonic

Panasonic H-HSA35100PP Manual de usuario

Panasonic

Panasonic VW-W4907 Manual de usuario

Panasonic

Panasonic ET-D3QW300 Manual de usuario

Panasonic

Panasonic ET-D75LE90 Manual de usuario

Panasonic

Panasonic AW-LZ16MD73P Manual de usuario

Panasonic

Panasonic ET-ELW21 Manual de usuario

Panasonic

Panasonic ET-DLE060C Manual de usuario

Panasonic

Panasonic Lumix H-FS14140 Manual de usuario

Panasonic

Panasonic Lumix H-PS14042 Manual de usuario

Panasonic

Panasonic ET-D3QW300 Manual de usuario

Panasonic

Panasonic ET-PLF10 Manual de usuario

Panasonic

Panasonic H-H025PP Manual de usuario

Panasonic

Panasonic WV-LZF61/2 Manual de usuario

Panasonic

Panasonic ET-D75LE95C Manual de usuario

Manuales populares de Lente de otras marcas

Navitar

Navitar 1-62314 Guía

Angenieux

Angenieux OPTIMO PRIME Manual de usuario

Sealife

Sealife SL050 Manual de usuario

Navitar

Navitar 1-51200 Guía

MeCan

MeCan NY1S-a5100 Manual de usuario

Tamron

Tamron SP 70-300mm F/4-56 Di VC USD Manual de usuario

FujiFilm

FujiFilm FUJINON ZA17x7.6BERD-S6 Manual de usuario

Navitar

Navitar 1-51332 Guía

Leica

Leica APO-SUMMICRON-SL 1:2/50 ASPH. Manual de usuario

Sony

Sony LKRL-Z200 Series Manual de usuario

Cosina

Cosina Voigtländer SUPER NOKTON 29mm F0.8... Manual de usuario

Arax

Arax PCS ARSAT H(K) 4.5/55 Manual de usuario

Cosina

Cosina Voigtländer NOKTON Manual de usuario

Cosina

Cosina Voigtländer NOKTON Manual de usuario

Navitar

Navitar 1-51338 Guía

Shamir

Shamir Star Guía de configuración

Canon

Canon J11ex4.5B Manual de usuario

Sony

Sony SAL70200G2 Manual de usuario