Panasonic CF-R1 Series Manual de usuario

Reference Manual

Personal Computer

Contents

Key Combinations ..............................................2

LED Indicators .................................................... 3

Touch Pad ........................................................... 4

Standby/Hibernation Functions ........................6

Security Measures ............................................10

Computing on the Road ...................................14

Battery Power ...................................................16

SD-MovieStage ................................................. 20

PC Cards ........................................................... 21

SD Memory Card/MultiMedia Card ..................22

RAM Module ......................................................29

External Display ............................................... 30

USB Devices ..................................................... 31

Modem ............................................................... 32

LAN ....................................................................34

Setup Utility ......................................................36

Technical Information ......................................42

DMI Viewer ........................................................ 43

List of Error Codes ........................................... 44

Dealing with Problems (Advanced) ................. 46

Illustrations in this Reference Manual

NOTE:NOTE provides a useful fact or helpful information.

CAUTION:CAUTION indicates a condition that may result in minor or moderate injury.

WARNING:WARNING indicates a hazard that may result in moderate or serious injury.

Windows 2000 : Information for Microsoft Windows®2000 Professional users.

Windows XP : Information for Microsoft Windows®XP Professional users.

Enter : This illustration means to press the [Enter] key.

Fn + F5 : This illustration means to press and hold the [Fn] key, then press the [F5] key.

[Start]* - [Run]: This illustration means to click [Start]*, then to click [Run].

(For some applications, you may need to double-click.)

*Windows XP : [start]

page: When the cursor is moved to an item under [Contents] or to page (green display), the

shape of the cursor will change to . Under this condition, if characters are tapped (or a

click is made), the corresponding page in the Reference Manual will be displayed.

: This illustration means to refer to the Operating Instructions.

Windows 2000 screens are used in this manual when no specific OS notes are required.

Some of the illustrations in this manual may differ slightly in shape from the actual items in order to make the

explanation easier to understand.

Model No. CF-R1 Series

We recommend that this Reference Manual be printed.

2000 XP

If the user has logged on without the administrator authority, some functions may not be executable, and some screens may

not be displayed as shown in this manual. If this happens, log on with the administrator authority to enable these functions.

NOTE

Pressing this key combination adjusts the brightness

of LCD. The brightness setting is stored in memory

separately under the condition the AC adaptor is

connected and under the condition the AC adaptor

is not connected.

By pressing this key combination, you can select ei-

ther an external display, LCD or simultaneous.

(page 30)

Pressing this key combination turns on/off audio from

the internal speakers and headphone jack. Rebooting

the computer, or powering off then on, restores the

speaker setting of the Setup Utility.

Pressing this key combination adjusts the volume of

the internal speakers and headphone jack.

Pressing this key combination causes the current

screen on the display to be saved to memory, and

powers off the computer. ( page 7)

Pressing this key combination displays the remain-

ing battery capacity on the screen. ( page 16)

Pressing this key combination causes the current

screen on the display to be saved to the hard disk,

and powers off the computer. ( page 7)

Key Combinations

CAUTION

Do not press the following key combinations repeatedly in (quick) succession.

Do not press the following key combinations while using the touch pad (mouse) or other keys.

LCD brightness con-

trol ( down)

LCD brightness con-

trol ( up)

Display change

Speakers on/off switch

Volume control

(down)

Volume control ( up)

Power off using the

standby function

Remaining capacity of

the battery pack

Power off using the

hibernation function

Fn + F1

Fn + F3

Fn + F4

Fn + F5

Fn + F7

Fn + F9

Fn + F6

Key Functions Popup Window

OFF

Fn + F2

Remaining

capacity (%)

display

Battery pack is

not inserted.

* When [Disable] is set for [Fn+F7/Fn+F10 Key] with the Setup Utility, this key combination becomes inoperable.

CAUTION

Disabling the speakers will also disable the

warning beep.

If a speaker is connected to the USB port, this

key combination cannot be used.

NOTE

Windows XP

When switching to a different user with the Fast User Switching function, these key operations may not work. In this case,

log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more.

This key combination cannot be used to ad-

just the volume of the warning beep.

If a speaker is connected to the USB port, this

key combination cannot be used.

NOTE

Fn + F

This indicator lights green when Caps Lock is pressed. Subsequent

non-shifted input is capitalized.

These indicators light green when NumLk is pressed. This causes a

portion of the keyboard to function as a numeric keypad. The [Enter] key

functions differently depending on the application.

This indicator lights green when ScrLk is pressed. Scroll lock func-

tions differently depending on the application.

This indicator lights when the hard disk drive is accessed.

This indicator lights when the SD memory card or MultiMedia Card is

accessed.

Not lit : Power off / Hibernation mode

Green : Power on

Blinking green : Standby mode

Not lit : AC adaptor or battery pack not connected or charg-

ing not being performed.

Orange : Charging in progress.

Green : Charging finished.

Red : Battery is low

(remaining battery capacity is approx. 9% or less).

Blinking red : Battery pack or charging malfunction.

Blinking orange :Unable to recharge due to violation of temperature

limits.

(The ambient temperature is outside the allowable

range. Once the allowable range requirement is sat-

isfied, charging begins automatically.)

Caps Lock

NumLk (Numeric

key)

ScrLk (Scroll lock)

Hard disk drive

status

SD memory card

status

Power status

Battery pack

status

LED Indicators

Touch Pad

Use the touch pad to move the cursor on the display and perform normal computer

operations.

By design the touch pad is to be used with a finger tip only. Therefore, do not use

any other type implement on the touch pad, i.e. stylus, pen, or pencil eraser.

NOTE

Two quick taps, but on the

second tap leaving your

finger down (applying

pressure) and moving it

on the work surface.

Function Touch Pad Operation

Moving the Cursor

Tapping/Clicking

Double-Tapping/

Double-Clicking

Dragging

Scroll

Move the tip of your finger

lightly over the surface.

Left Button

Right Button

Work Surface

clicking

tapping

double-tapping double-clicking

NOTE

Refer to [Mouse Properties]* for information on basic operations other than the

above.

*Windows 2000 : [Start] - [Settings] - [Control Panel] - [Mouse]

Windows XP : [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse]

Trace the circumference of the

work surface.

While holding down the

button, moving your finger

on the work surface

Touch Pad

Handling the Touch Pad

Do not place any object on the work surface or press down forcefully with sharp-

pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils

and ball point pens).

Try to avoid having any harmful substances such as oil, come in contact with the

touch pad. The cursor may not work properly in such cases.

When the touch pad becomes dirty:

Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth

first applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene or thinner, or disinfectant-type alcohol.

Standby/Hibernation Functions

Function

Where data is saved to

Speed

Requires power supply

Starting Up Your Computer Quickly

Differences between the standby and hibernation functions

Hibernation function

Hard disk

Somewhat slow

Power is not required to maintain data

Standby function

Memory

Fast

Yes (if power is cut, all data is lost)

If the computer will not be operated for an extended period of time, it is recom-

mended that hibernation mode be used instead of the standby mode.

NOTE

Setting for Initiating the Standby or Hibernation Function Using the Power Switch

If you use the standby or hibernation function, you can shut down the computer without

closing programs and documents. Upon restarting your computer from either the standby

or hibernation mode, you can immediately continue working in all programs, or docu-

ments that were open at the time the computer was placed into standby or hibernation

mode.

Windows 2000

1Select [Start] - [Settings] - [Control Panel] - [Power Options],

in [Hibernate] add the check mark for [Enable hibernate sup-

port] and select [Apply]

2In [Advanced], select [Standby] or [Hibernate] for [When I press

the power button on my computer:], then select [OK]

Windows XP

1Select [start] - [Control Panel] - [Performance and Maintenance]

- [Power Options], in [Hibernate] add the check mark for [En-

able hibernation] and select [Apply]

2In [Advanced], select [Stand by] or [Hibernate] for [When I press

the power button on my computer:], then select [OK]

Standby/Hibernation Functions

Standby Mode

Hibernation Mode

The computer should be set for standby or hibernation function. ( page 6).

(After releasing your finger from the

power switch, do not touch the power

switch until the power indicator goes

off or blinks.)

With the method below, you can shut down the computer by using the standby

function.

Fn + F7 ( page 2)

Windows 2000

In [Start] - [Shut Down], select [Stand by].

Windows XP

In [start] - [Turn Off Computer], select [Stand By].

With the method below, you can shut down the computer by using the hiberna-

tion function.

Fn + F10 ( page 2)

Windows 2000

In [Start] - [Shut Down], select [Hibernate].

Windows XP

In [start] - [Turn Off Computer], press and hold Shift , then select [Hibernate].

Shutting Down Using the Standby or Hibernation Function

CAUTION

NOTE

* When the speaker function is disabled, e.g., by setting [Disable] for [Speaker] with the Setup

Utility ( page 37) or by the key combination Fn + F4 , there will be no beep sound.

Slide the power switch; at the “beep*” sound,

release your finger

At the “beep*” sound, release your finger from the power switch. If you continue

to slide the switch and hold it for more than four seconds, the computer will emit

a second “beep*” then power off. Data not previously saved will be lost.

Windows 2000

Even if, [When I press the power button on my computer:] is set to [Power Off]

with [Control Panel] - [Power Options] - [Advanced], the power switch is slid for

more than four seconds and is not released, a second “beep*” will sound and the

power will go off, although the computer will not completely shut down.

Windows XP

Even if, [When I press the power button on my computer:] is set to [Shut down]

with [Control Panel] - [Performance and Maintenance] - [Power Options] - [Ad-

vanced], the power switch is slid for more than four seconds and is not released,

a second “beep*” will sound and the power will go off, although the computer will

not completely shut down.

When [Standby]* or [Hibernate] is selected as the setting for [When I close the lid of my

portable computer:], the computer will enter either the standby or hibernation mode

when the display is closed. Operation will resume when the display is opened. Even if

the display is closed after the computer has entered either the standby or hibernation

mode, operation will resume when the display is opened. If the computer does not

resume when the display is opened, slide the power switch.

*Windows XP : [Stand by]

After the display returns, the computer needs a short period of time to reinitialize.

This takes about 15 seconds. Do not shut down or restart Windows, or enter

either the standby or hibernation mode again during this time, as this may subse-

quently cause Windows to operate abnormally.

When operation resumes, devices such as a mouse, modem or PC Cards may

not function properly. In such cases, you will need to restart your computer or

reinitialize the individual devices.

Avoid the following until the power is completely turned off when turning off the

computer by using the standby or hibernation functions, or resuming operation

from the standby or hibernation.

Touch the keyboard (excluding password input), touch pad, or power switch.

Connect or disconnect the AC adaptor.

Close or open the display.

Even when a password has been set in the Setup Utility, does not appear

when the computer resumes from the standby or hibernation mode.

If you want to use the security function when using the standby or hibernation

mode, use the Windows password as follows:

Windows 2000

Set the password in [Control Panel] - [Users and Passwords], then add the check

mark for [Prompt for password when computer goes off standby] in [Control Panel]

- [Power Options] - [Advanced].

Windows XP

Select the account to change in [Control Panel] - [User Accounts] and set the

password, then add the check mark for [Prompt for password when computer

resumes from standby] in [Control Panel] - [Performance and Maintenance] -

[Power Options] - [Advanced].

Slide the power switch

Resuming Operation

CAUTION

Standby/Hibernation Functions

Do not use the standby or hibernation function when using the network function.

Save all data before powering off your computer.

When restarting from or shutting down to the standby or hibernation mode, do not

touch the touch pad (or move the mouse if one is connected). These devices may fail

to operate, you will then need to restart your computer using the keyboard.

Do not enter the standby or hibernation mode during the following periods (you may

corrupt your data or file):

• While the floppy disk drive is being accessed, or hard disk drive indicator ( ) or

SD memory card indicator ( ) is on.

• While playing/recording audio files and playing an MPEG file.

• While communications software is being used.

Do not enter the standby or hibernation mode during the following periods. The

standby or hibernation function may not work, or the computer (or peripherals) may

fail to work properly.

• When a file in an external device such as a CD-ROM drive, external hard disk, or

ATA card is opened, the standby or hibernation function may not work. In such

cases, close the file.

• LAN cards (port), SCSI cards and modem cards (port) etc. may not recover after

entering the standby or hibernation mode. If this occurs, restart the computer.

• When a USB device is in use or is connected to the computer (note: only for some

USB devices). If this occurs, remove the USB device temporarily and restart the

computer.

If you hold down on Alt , Ctrl or Shift to enter the standby or hibernation mode,

after resuming operation, you must press the same key. For example, if you hold

down on Shift while sliding the power switch, upon resuming, if you do not press

Shift again, only capital letters will result from typing.

Slide the power switch and hold it for more than four seconds to power off the com-

puter only when the computer locks up. Data not previously saved will be lost.

In the standby mode, power is consumed. If a PC Card is inserted, more of that

power is consumed. When all power has been consumed, all data saved at standby

is lost since it is retained in memory. We therefore recommend plugging in the AC

adaptor when using the standby function.

If the standby or hibernation function is used repeatedly, the computer may not work

properly. To stabilize computer operations, we recommend shutting down Windows

on a regular basis (about once a week) without using the standby or hibernation

function.

Do not insert or remove peripherals while your computer is in the standby or hiberna-

tion mode; abnormal operation may result.

Precautions for Using the Standby or Hibernation Function

Function to use

Supervisor Password

User Password

SD Memory Card Se-

curity Function

Hard Disk Lock

Security Measures

Situation

You do not want your computer to be used without permission

You do not want the data on the hard disk to be read, or data to

be written to the hard disk, in cases including theft.

To prevent unauthorized access of your computer, the various security measures are provided below.

When you do not want your computer to be used without permission

Reference

below

page 24

page 13

You should set your “Supervisor Password” and “User Password” (The User Password

can only be set when the Supervisor Password has been set).

Without the password, access to your computer is impossible.

Starting up when the password is set

(When [Password on boot] of the [Security] menu is set to [Enable].)

Enter your password* and press Enter .

Three incorrect attempts

No password for about a minute

The correct password

Will Start

Will Not Start

(Power off)

If entering the Setup Utility with Supervisor Password

You can register all items of the Setup Utility ( page 36).

If entering the Setup Utility with User Password

You can not register [Advanced] menu.

The User Password can be changed only when [User Password Protection] has

been set to [No Protection]. The User Password cannot be deleted.

F9 does not work.

*Supervisor Password or User Password set in the Setup Utility (not the Windows password).

When [Password on boot] in the Setup Utility is set to [Disable], the password is not

necessary when the computer is started up, but the password becomes necessary

when the Setup Utility is started up. This alternative makes it possible to prevent the

contents of the Setup Utility from being changed.

NOTE

Windows has a security function that differs from the security function of the Setup Utility. For detailed informa-

tion, refer to the Windows help.

NOTE

Otros manuales para CF-R1 Series

Tabla de contenidos

Otros manuales de Computadora portátil de Panasonic

Panasonic

Panasonic CF-W5MWEZZBM - Toughbook W5 - Core Duo 1.06... Manual de usuario

Panasonic

Panasonic CF-30KTPAXJM Manual de usuario

Panasonic

Panasonic TOUGHBOOK CF-31UFLAX series Manual de usuario

Panasonic

Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2... Manual de usuario

Panasonic

Panasonic CF-74ECBAXBM - Toughbook 74 - Core Duo 2 GHz Manual de usuario

Panasonic

Panasonic CF-45 Series Manual de usuario

Panasonic

Panasonic CF-28MCFAZ Manual de usuario

Panasonic

Panasonic Touchbook CF-50 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-18 Series Manual de usuario

Panasonic

Panasonic CF-29 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-29CTKGZKM Manual de usuario

Panasonic

Panasonic CF-29C3KGZ1M Manual de usuario

Panasonic

Panasonic Toughbook W8 Manual de usuario

Panasonic

Panasonic Toughbook CF-18BDAZXMM Manual de usuario

Panasonic

Panasonic CF-R1 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-T5MWETABM Manual de usuario

Panasonic

Panasonic Toughbook CF-19KDRAG6B Manual de usuario

Panasonic

Panasonic Toughbook CF-52EKMBGAM Manual de usuario

Panasonic

Panasonic CF-73ECQTXxM Manual de usuario

Panasonic

Panasonic Toughbook CF-H1ADBBZCM Manual de usuario

Panasonic

Panasonic CF-T2 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-H1ADBBZCM Manual

Panasonic

Panasonic CF-W2 Series Manual de usuario

Panasonic

Panasonic Toughbook F9 Manual de usuario

Manuales populares de Computadora portátil de otras marcas

HP ze2401xt - Pavilion Notebook PC Manual de usuario

Velocity

Velocity NoteMagix M10 Manual de usuario

Dell

Dell Alienware 17 R2 Manual de usuario

Toshiba

Toshiba A105-S2236 Manual de usuario

HP ENVY 17 Manual

Winbook

Winbook LM Manual de usuario

Dell

Dell Inspiron 1464 Manual de usuario

Dell

Dell Inspiron 15R 5537 Manual de usuario

HP PROBOOK 4520S Manual

Dell

Dell Latitude ATG D620 Manual de usuario

Sony

Sony VAIO PCG-FX270 Manual de usuario

Dell

Dell Latitude 7310 Manual de usuario

Dell

Dell Precision GU806 Manual de usuario

Sony

Sony VAIO PCG-R505JLK Manual de usuario

Lenovo

Lenovo THINKPAD X32 Manual de usuario

HP Compaq tc4200 Guía de inicio rápido

Toshiba

Toshiba mini NB300 Manual de usuario

Lenovo

Lenovo ThinkPad X201 Tablet Manual