Panasonic CF-30 Series Manual de usuario

Reference Manual

Personal Computer

Model No. CF-30 Series

We recommend that this Reference Manual be printed.

Key Combinations

NOTE

zDo not repeatedly press the keys in quick succession.

zDo not use the key combinations together with touch pad (external mouse), touchscreen (only for model with touch-

screen) or other key operations.

zDo not use the key combinations before you log on to Windows. Wait until the hard disk drive indicator turns off.

On the Setup Utility screen, you can use the key combinations of

and

zThe key combinations may not work with some applications.

zThe popup menu icon appears after logging on to Windows. It may not appear in some application conditions (e.g.,

when [Command Prompt] is set to “Full Screen”).

Key Function Popup menu icon

LCD brightness

(

= down /

= up)

NOTE

zTo obtain higher brightness, set [LCD Brightness Mode] to [High Brightness]

in the [Main] menu of the Setup Utility. (Îpage 62)

Display switching (Îpage 40)

(When an external display is connected)

Internal LCD Simultaneous display External display

CAUTION

zDo not press any keys until the display has finished switching.

zDo not use this function:

• When an external display is not connected.

• When playing motion video such as DVD or MPEG.

• When using the Extended Desktop.

• When showing a game screen such as pinball.

Key Combinations

Speaker on/off

NOTE

zBeeps do not sound if you turn off the speaker sound.

OFF

(MUTE)

Volume

(

= down /

= up)

Activate standby (Îpage 8)

Remaining battery level (Îpage 16)

F10

Activate hibernation (Îpage 8)

Key Function Popup menu icon

Key Combinations

You can make two settings:

•Fn key lock

is locked (pressed-down) until you press another key. Use this when pressing difficult key combinations.

• Popup menu icon on/off

1Start up the Hotkey Settings.

Click [start] - [All Programs] - [Panasonic] - [Hotkey Settings].

2Make the settings.

[Use Fn key lock]

zWhen using an

key combination

APress

once. (Locked)

BPress another key. (Lock released)

zWhen using successive

key combinations

APress

twice. (Locked)

BPress another key.

Fn key remains locked until you press

again.

[Notification]

[Make sounds when Fn key is pressed]*1

[Show status on screen]: Displays the Fn key status on the notification area.

•:

is locked.

•:

is not locked.

[Disable popup]

The popup menu icon will not be displayed.

3Click [OK].

NOTE

zYou can have different settings for each user.

*1 If the speakers are muted, beeps do not sound.

Hotkey Settings

Touchscreen

You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface

with the stylus (included).

zTo right-click

AClick on the notification area.

changes to .

BClick the object you want to right-click.

returns to .

NOTE

zYou need to make the following setting for each user.

AClick [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Panel Configuration].

BSelect the settings, and then click [OK].

zDo not add a check mark to [Delete Cursor] since the display may be distorted.

zIf you add a check mark for [Use] in [Hold [Ctrl] key down + Touch the screen] of [Touch Panel Configuration], touching

the screen may always be recognized as a right-click. To return to the normal operation, press

Ctrl

on the keyboard.

zThe touchscreen function does not work in the Setup Utility, in the full screen of [Command Prompt] or in Recover Pro

(Îpage 73).

1Run [Touch Screen Calibration Utility].

Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].

2Using the stylus, touch each of the 12 “+” target marks one by one until it blinks, and then

press

Enter

3Press

Enter

NOTE

zPerform the touchscreen calibration for each user.

Touchscreen Calibration

Panasonic Hand Writing

You can make a bitmap file (.bmp) of a simple character and a figure such as signature by handwriting on the touch pad and

the touchscreen (only for model with touchscreen).

CAUTION

zDo not use the Fast User Switching function while Panasonic Hand Writing is active.

zIf you install other pointing devices (e.g., commercially available mouse driver) and overwrite the touch pad driver,

Panasonic Hand Writing will not work.

NOTE

zThe display of Panasonic Hand Writing may be distorted if the number of display colors is changed. Right-click on

the notification area and click [Exit Panasonic Hand Writing], and then restart Panasonic Hand Writing.

zPanasonic Hand Writing may not work properly if another application software is active. In this case, close the applica-

tion software and try handwriting again.

1Double-click on the notification area.

Alternatively you can click [start] - [All Programs] - [Panasonic] - [Panasonic Hand Writing].

NOTE

zSelect the image size before handwriting by clicking [Option] - [Window size]. If you change the size after handwriting,

the image quality will become lower.

zYou can copy the bitmap image by clicking [Edit] - [Copy], and paste it in another application software that supports bit-

map format.

zThe touch pad mode will not work properly when using the extended desktop.

zThe touch pad mode will be canceled in the following cases.

• Switching to another application

• Resuming from standby or hibernation

•Pressing

Alt

• Touching the touchscreen (only for model with touchscreen)

zAn external mouse or trackball connected via the port replicator (optional) will not work during handwriting in the touch

pad mode.

Starting Panasonic Hand Writing

Standby and Hibernation Functions

The standby or hibernation function allows you to shut off the computer without closing programs and documents. You can

quickly return to the programs and documents that you were working on before standby or hibernation.

1Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -

[Advanced].

2Select [Stand by] or [Hibernate] for [When I close the lid of my portable computer:] /

[When I press the power button on my computer:], and then click [OK].

NOTE

zYou do not need to make the setting if you use the Windows menu to enter standby or hibernation.

zConnect the AC adaptor if the computer will be in standby mode for a long period of time. If you cannot use the AC adap-

tor, use hibernation instead.

zUsing standby or hibernation repeatedly may cause malfunction of the computer. To stabilize computer operation, restart

Windows regularly (about once a week) without using standby or hibernation.

zSave the necessary data.

zClose files you have opened from removable disk and network drive.

zThe password you set in the Setup Utility is not requested at resuming. You can use the Windows password for security in

standby or hibernation.

AClick [start] - [Control Panel] - [User Accounts], and select the account.

BClick [Create a password] and set the password.

CClick [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Advanced], and add the

check mark in [Prompt for password when computer resumes from standby].

Function Data is saved to Recovery time Power supply

Standby Memory Short Required. (If power is not supplied, all data will be lost.)

Hibernation Hard disk Rather long Not required. (However power is slightly consumed to

keep the hibernation.)

Setting Standby or Hibernation

Precautions

Standby and Hibernation Functions

zDo not enter standby or hibernation in the following conditions, otherwise the data or file may be corrupted, standby or

hibernation may not work, or malfunction may occur in the computer or the peripheral devices.

• When any of the multimedia pocket device indicator *1, the hard disk drive indicator and the SD Memory Card indi-

cator is on.

• When playing/recording audio files or displaying motion video such as MPEG files.

• When playing a DVD-Video.

• When writing to a disk.

• When using communication software or network function.

• When using a PC Card.

(If the card fails to work normally, restart the computer.)

• When an external mouse is connected to the serial port.

zThe computer does not enter standby or hibernation immediately after resuming. Wait approximately one minute.

*1 Except when using a second battery pack

To enter standby or hibernation

1Close the display, or slide the power switch (A) until a beep*2

sounds.

Standby: The power indicator (B) blinks green.

Hibernation: The power indicator (B) goes off.

zYou can alternatively use the Windows menu to enter standby or hibernation. To

enter standby, click [start] - [Turn Off Computer] - [Stand By]. To enter hiberna-

tion, click [start] - [Turn Off Computer], then press and hold

Shift

and click

[Hibernate].

CAUTION

While the computer is entering standby or hibernation

zDo not:

• Touch the keyboard, touch pad, touchscreen (only for model with touchscreen), or power switch.

• Use an external mouse or other peripheral device.

• Connect or disconnect the AC adaptor.

• Close or open the display.

Wait until the power indicator blinks green (standby) or goes off (hibernation).

zIt may take one or two minutes to enter standby or hibernation.

Entering/Resuming from Standby or Hibernation

Standby and Hibernation Functions

zAt the beep*2, immediately release the power switch. If you slide and hold the power switch for longer than four sec-

onds, the computer will forcibly shut down and unsaved data will be lost even if you have set [Shut down] in [When I

press the power button on my computer:] (Îpage 7 “Setting Standby or Hibernation”).

In standby or hibernation

zDo not attach or remove a multimedia pocket device (excluding a second battery pack) and peripheral device. Doing

so may cause malfunction.

zPower is consumed in standby mode. Power consumption may increase when a PC Card is inserted. When power is

exhausted, the data retained in memory will be lost. Connect the AC adaptor when using the standby function.

*2 If the speakers are muted, beeps do not sound.

To resume from standby or hibernation

1Open the display, or slide the power switch (A).

zWhen [Stand by] or [Hibernate] is selected as the setting for [When I close the

lid of my portable computer] (Îpage 7), you can resume operation opening the

display.

CAUTION

zDo not perform the following operations until resuming is complete. After the display has resumed, wait approximately

30 seconds (normally) or 60 seconds (when the computer is on a network).

• Touch the keyboard (except for password input), touch pad, touchscreen (only for model with touchscreen), or power

switch.

• Use an external mouse or other peripheral device.

• Connect or disconnect the AC adaptor.

• Close or open the display.

• Shut down or restart Windows.

• Enter standby or hibernation.

Saving Power

You can extend battery life and save power also during AC adaptor usage.

Use the methods below to reduce power consumption.

zChange [Power Options]

Click [start] - [Control Panel] - [Performance and Maintenance] -

[Power Options] to select [Max Battery] under [Power schemes].

While [Portable/Laptop] is selected under [Power Options] as the fac-

tory default, selecting [Max Battery] will further reduce power con-

sumption.

Also, make detailed settings such as reducing the time entered in the

[Turn off monitor] setting.

zUse Power Saving Utility Îpage 11

Power Saving Utility provides additional power saving functions not

available in [Power Options].

zPress

to reduce LCD brightness

Reducing internal LCD brightness will reduce power consumption.

zTurn off the computer when it is not in use

You can also turn off only the wireless LAN or Bluetooth power.

zDisconnect external devices (USB devices, PC cards, external

mice, etc.) that are not being used

zUse Standby/Hibernation

Press

to set the computer to standby or

F10

to set it

to hibernation when you have to leave the computer. This shuts

down computer operation to reduce power consumption.

Disable Wake Up from wired LAN and Wake Up from wireless LAN functions when they are not needed. This reduces

power consumption in Standby/Hibernation.

To confirm current settings, click [start] - [All Programs] - [Panasonic] - [Power Saving Utility] to view [Wired LAN standby

power saving function] or [Wireless LAN standby power saving function].

Reducing Power Consumption

Otros manuales para CF-30 Series

Tabla de contenidos

Otros manuales de Computadora portátil de Panasonic

Panasonic

Panasonic Toughbook CF-48N4FKUEM Manual de usuario

Panasonic

Panasonic CF-T5 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-H2ALFHA1M Manual de usuario

Panasonic

Panasonic CF01XSDAPM - HAND HELD COMPUTER Manual de usuario

Panasonic

Panasonic Toughbook CF-31GT2AX2M Manual de usuario

Panasonic

Panasonic Toughbook CF-T8EWATZ2M Manual de usuario

Panasonic

Panasonic Toughbook CF-M33W5M Manual de usuario

Panasonic

Panasonic Toughbook CF-F8EWAZZJM Manual de usuario

Panasonic

Panasonic 30 - Toughbook - Core 2 Duo Manual de usuario

Panasonic

Panasonic Toughbook CF-52ELNBD2M Manual de usuario

Panasonic

Panasonic Toughbook CF-F9KWH011M Manual de usuario

Panasonic

Panasonic Toughbook CF-74JCL02AM Manual de usuario

Panasonic

Panasonic Toughbook CF-U1A1B1G2M Manual de usuario

Panasonic

Panasonic CF-Y7 series Manual de usuario

Panasonic

Panasonic Toughbook 19 Manual de usuario

Panasonic

Panasonic CF-R1 Series Manual de usuario

Panasonic

Panasonic Toughbook CF-48E4KFUKM Manual de usuario

Panasonic

Panasonic Toughbook CF-74GCE01BM Manual de usuario

Panasonic

Panasonic CF-19KCRC66M Manual de usuario

Panasonic

Panasonic CF-19K4RAX2M Manual de usuario

Panasonic

Panasonic CF-25 Manual de usuario

Panasonic

Panasonic Toughbook CF-18FHAZXBM Manual de usuario

Panasonic

Panasonic Toughbook CF-52EKMBGAM Manual de usuario

Panasonic

Panasonic Toughbook CF-72V3JUZQM Manual de usuario

Manuales populares de Computadora portátil de otras marcas

HP ze2401xt - Pavilion Notebook PC Manual de usuario

Velocity

Velocity NoteMagix M10 Manual de usuario

Dell

Dell Alienware 17 R2 Manual de usuario

Toshiba

Toshiba A105-S2236 Manual de usuario

HP ENVY 17 Manual

Winbook

Winbook LM Manual de usuario

Dell

Dell Inspiron 1464 Manual de usuario

Dell

Dell Inspiron 15R 5537 Manual de usuario

HP PROBOOK 4520S Manual

Dell

Dell Latitude ATG D620 Manual de usuario

Sony

Sony VAIO PCG-FX270 Manual de usuario

Dell

Dell Latitude 7310 Manual de usuario

Dell

Dell Precision GU806 Manual de usuario

Sony

Sony VAIO PCG-R505JLK Manual de usuario

Lenovo

Lenovo THINKPAD X32 Manual de usuario

HP Compaq tc4200 Guía de inicio rápido

Toshiba

Toshiba mini NB300 Manual de usuario

Lenovo

Lenovo ThinkPad X201 Tablet Manual