Panasonic ER?GB50 Manual de usuario

© Panasonic Electric Works Co., Ltd. 2010.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number SD1010A67CE

AC/Rechargeable Hair Clipper

Model No. ER-GB50

Asia

Middle East

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 4

5 Wiring Connection Diagram ---------------------------------- 8

6 Schematic Diagram ---------------------------------------------- 9

7 Exploded View and Replacement Parts List -----------10

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

4

4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions

1. Remove the blade.

2. Insert a slotted screwdriver into the slit of dial cover firmly

and raise it with the driver.

NOTE :

Make sure there is NO scratch or damage on the

parts.

3. Loosen a screw and take out the dial with the dial mount-

ing base.

5

4. Loosen two screws.

5. Remove the housing C.

6. Loosen a screw.

7. Insert a slotted screwdriver under the front panel, then

raise the front panel with the driver slightly.

6

8. Loosen 8 screws and remove the housing A.

9. Loosen 2 screws and remove the module assembly with

rechargeable battery first, then remove the motor holder.

7

4.2. Assembly Instructions

For assembly, reverse the order of disassembly.

1. Insert the rechargeable battery into the battery holder.

NOTE:

Make sure to attach the washer and O-ring to the bat-

tery terminal. The O-ring for the battery terminal is the

thickest. Confirm if the O-ring is attached properly.

• Battery terminal : washer x 1and O-ring x 1

• terminal pins: o-ring x 1

2. Set the motor holder first, then set the module assembly

with rechargeable battery.

NOTE:

Make sure that two motor lead wires are set within the

space between the battery holder and the motor

holder to prevent pinching.

NOTE:

Make sure to attach the switch cam with the lowest

position.

Apply the grease (G741S) on the housing O-ring.

3. Fix the motor holder in housing A with two screws.

NOTE:

Make sure that two O-rings are set.

4. Set the front panel.

NOTE:

Hook the bottom side first and fix the front panel.

Make sure to set the switch handle to the "0" position.

5. Set the click spring.

8

6. Set the housing C.

NOTE:

Make sure to set the rack.

Insert the hook of housing C under the front panel

first.

7. Fix the dial and the dial mounting base by a screw.

NOTE:

Make sure to set the slit at left side.

Apply the grease (G741S) on the gear of dial.

5 Wiring Connection Diagram

9

6 Schematic Diagram

Model No. : ER-GB50 Exploded View

7 Exploded View and Replacement Parts List

Otros manuales para ER?GB50

1

Tabla de contenidos

Otros manuales de Cortapelos de Panasonic

Panasonic

Panasonic ER1611 Manual de usuario

Panasonic

Panasonic ER-GC70 Manual de usuario

Panasonic

Panasonic ER?GC20 Manual de usuario

Panasonic

Panasonic ER-DGP82 Manual de usuario

Panasonic

Panasonic ER-GC52 Manual de usuario

Panasonic

Panasonic ER-145 Manual de usuario

Panasonic

Panasonic ER-GP84 Manual de usuario

Panasonic

Panasonic ER1611 Manual de usuario

Panasonic

Panasonic ER-147 Manual de usuario

Panasonic

Panasonic ER-HGP72 Manual de usuario

Panasonic

Panasonic ER-GP81 Manual de usuario

Panasonic

Panasonic ER1511 Manual de usuario

Panasonic

Panasonic ER1420 Manual de usuario

Panasonic

Panasonic ER-PA10 Manual de usuario

Panasonic

Panasonic EH-KA81 Manual de usuario

Panasonic

Panasonic ER-SC40 Manual de usuario

Panasonic

Panasonic ER1410 Manual de usuario

Panasonic

Panasonic ER-GC71 Manual de usuario

Panasonic

Panasonic ER-CA70 Manual de usuario

Panasonic

Panasonic ER1610 Manual de usuario

Panasonic

Panasonic ER-GP80 Manual de usuario

Panasonic

Panasonic ER-GS60 Manual de usuario

Panasonic

Panasonic ER508 Manual de usuario

Panasonic

Panasonic ER1421 Manual de usuario

Manuales populares de Cortapelos de otras marcas

Clatronic

Clatronic HSM 800 Manual de usuario

Mellerware

Mellerware MACRO ALDANY MA20001 Manual de usuario

Create

Create CLIPPER EASY Manual de usuario

VALERA

VALERA X-Master 652 Manual de usuario

Wahl

Wahl 1870Li Manual de usuario

Remington

Remington HC5780 Manual de usuario

Lister

Lister Legend Manual de usuario

Philips

Philips HC5440/80 Manual de usuario

Andis

Andis MBA 23125 Manual de usuario

Philips

Philips Philishave HQC488/61 Manual de usuario

Shear Magic

Shear Magic Nifty 1800 Manual de usuario

Philips

Philips QC5390 Manual de usuario

Andis

Andis US-1 Guía de referencia rápida

Philips

Philips HC5450 Manual de usuario

Andis

Andis US-1 Instrucciones de instalación

Remington

Remington Classic HC450 Manual de usuario

Andis

Andis ML Instrucciones de instalación

O'Barber

O'Barber MINI SLIDE Manual de usuario