Panasonic WJHD316 - DIGITAL DISK RECORDER Guía del usuario

Digital Disk Recorder

WJ-HD316 Quick Operation Guide

The Camera Selection Buttons change their color depending on the operation condition.

Green: Camera live on monitor Orange: Camera under Recording

Blue: Camera live on monitor and under recording

Camera Selection Buttons

１

STOP Button

２

PLAY/PAUSE Button

３

Jog Dial

４

SHIFT Button

７

[12] Button

８

Arrow Button

９SEARCH Button

１１

５Shuttle Ring

Monitor Switch Button

６SET Button

１０

１

Startup

(1) Insert the power plug to an outlet (make sure of the right

power source) and turn on the power switch on the rear panel.

• The OPERATE indicator will light and the system check will start. The startup

splash image to the left will be displayed on monitor 2 and VGA.

(3) Enter a user name and password by rotating the jog dial

to select a character and by pressing the arrow buttons

to move the cursor.

Cursor movement : Arrow button

Character input : Jog dial

Number input : Camera selection button

(4) Press the SET button to display a live image

• When authenticated, a live image will be displayed.

４

９

Startup splash image

１０

９

１０

* When the auto login is on, live images will be displayed after the system

check. (Step 2 to 4 not required)

(2) Press any button on the front panel and the login window

will be displayed.

９

４

１

Monitor 2, VGA Monitor: Display of live or recorded images (and setup menu)

●Camera Title

Displays the edited camera title.

Selectable positions: Upper left, upper right, lower left, lower right (Default), center.

●Task Bar

Displays the current status. The task bar consists of the main bar, the left bar and the

right bar. There are 3 different ways to display the task bar as follows.

■Status on the Task Bar

Status Display Area Live/Playback Time

Display Area Error Display Area

Copy / Delete Icons Alarm Display Area

●Event Display

Displays an alarm when an alarm occurred.

Selectable positions: Upper left, upper right (Default), lower left, lower right, center.

Event display depending on event.

VMD-* : When motion is detected by the motion detection function

LOSS-* : When video loss has occurred

COM-# : When a command alarm is supplied from a PC connected to the SERIAL

connector on the rear panel of this unit.

TRM-# : When a signal is supplied form an external device such as a door sensor

to the ALARM terminal. （*: Camera number, #: Event

number）

●Time Display

Displays the current time and date.

Selectable positions: Upper left (Default), upper right, lower left, lower right, center.

Monitor 1 : Display of live images only

●Camera Title

Displays the edited camera title.

Selectable positions: Upper left, upper right, lower left, lower right (Default), center.

Style 1: Displays only the main bar and the status is displayed on it.

Style 2: Displays the status on the main bar, the left bar and the right bar.

Style 3: Displays the status only on the main bar, and does not display information on

the left and right bar.

Display

※The setup menu is displayed only on monitor 2.

Right bar

Left bar Main bar

Camera Title

Camera title

Time / Event Display

Monitor of live images

(1)Press the MONITOR 1 / MONITOR 2 button to select the monitor

(2)Press a camera selection button

Live images from the selected camera will be displayed and the respective camera

selection button will light green or blue.

６

Please check that the SHIFT button is not lit before pressing the camera selection button.

１

When monitor 1 is selected the indicator will light.

When monitor 2 is selected the indicator will not light.

Camera Title Display 1

(4)Rotate the jog dial to select a recording event to be played

and press the PLAY/PAUSE button.

The LISTED indicator and the indicator on the PLAY/PAUSE button will light

and playback of the selected recording event will start.

４

４３

When a searching filter is selected, the respective searching filter window will be displayed.

Select UNLOCK FILTER and press the SET button to cancel the selected filter.

(2)Use the arrows button ( ) to select a searching filter

(TIME &DATE, CAMERA, EVENT, TEXT), press the SET button

(3) Filter recording events.

By time and date

Move the cursor using the arrows

button and rotate the jog dial to enter

time and date. Press the SET button

to determine the selection.

By recording event

Move the cursor to select the recording

event using the arrows button and rotate

the jog dial to ON. Press the SET button

to determine the selection.

By text information

Rotate the jog dial to select OFF,

WITH TEXT or WITHOUT TEXT.

Press the SET button to determine

the selection.

By camera and channel

Select camera channel numbers

using the arrows button to apply

filtering and complete by pressing

the SET button.

９

３

(1) Press the SEARCH button repeatedly until the recording

event list window is displayed.

Search and Play

１１

Playback (1)

９

Recording Event List Window

１０

• Use the arrows button ( ) to switch displaying the list and the

thumbnail window alternately.

Recording Event List Window

Recording Event Thumbnail Window

Display of the Number of the listed data.

Display of Camera channel of the recorded image and of the recording Mode.

Display of Time and Date when recording started.

１

１０

Searching for a marked point and play from that point

●About Marking

Note: Searching for a marked point, requires preliminary

setting of a mark at a replay position

・Marking allows to “mark” a replay position for easier data retrieval.

・Date and time of marked points are displayed on the marking list.

Marking list window

・Up to 100 points can be marked. When more than 100 points are marked,

the oldest marked point will be overwritten by the new marked point.

・When marked while displaying in multi-screen, the same numbers of split

screens will be counted as marked points.

(Marking on a 16-screen: 16points will be marked simultaneously)

２

Playback (2)

(3) Press the PLAY/PAUSE button

(2) Rotate the jog dial to select a desired marked time

・The LISTED indicator and the indicator on the PLAY/PAUSE button will light,

and playback of the recorded image from the selected marked time will start.

(1) Press the SEARCH button repeatedly until the

marking list window is displayed.

１１

１

４

３

１１４３

(2) Press the SHIFT button.

The SHIFT indicator will light.

７

８

(3) Press the camera selection button

[12] at a desired point to be

marked during playback.

(1) Press the PLAY/PAUSE button

to start playback ３

８

３

Skip

Clockwise rotating: skip to start time of next recording.

Counterclockwise rotating: skip to the start time of the previous recording.

●Rotating the jog dial during playback will skip to the

next or previous recorded image and start playback

Fast forward / Fast reverse

●Rotating the shuttle ring will change the playback speed.

Clockwise rotating: fast forward

Counterclockwise rotating: fast reverse

• Depending on the degree of rotation the speed will change in 6 steps

(1/2x, 1x, 2x, 5x, 10x, 20x).

• When the shuttle ring is held in the 20x position for 5 sec.,

the playback speed will be 50x.

• When the shuttle ring held 5 more sec. after the playback speed became 50x,

the playback speed will be 100x.

• To play at normal speed, release the shuttle ring.

５

• If there is no next or previous recorded image, current playback will continue.

４

Useful Functions

Multi Screen

(2) Press the [Shift] button

Button 1: 4-split screen Button 2: 7-split screen

Button 3: 9-split screen Button 4: 16-split screen

Button 5: 10-split screen Button 6: 13-split screen

７

(3) Press a camera selection button (1~6) to select

a desired multiscreen

(4) To return to a single screen display press the SHIFT

button. The SHIFT indicator will go off. Press any of the

camera selection buttons.

１

７

１

７

(1) Press the [Monitor] Switch button to select the monitor

６

・The SHIFT indicator will light

●Press the SET button while holding the rotated

shuttle ring to hold a desired playback speed.

• To return to the normal playback speed, press the SET button.

５

１０

When monitor 1 is selected, the indicator will light

When monitor 2 is selected the indicator will not light

２

３

１

View images from PC

How to display the operation window

(1) Start up the PC and the Web browser

About the operation window

(2) Enter the IP address set to this WJ-HD316

in the address box and press the enter key.

(3) Enter the user name and password registered on this

unit and click on the LOGIN button

(Please use Internet Explorer 5.5 SＰ2 or 6.0)

The switcher

functions such

as switching

camera

channels or

displaying

sequentially,

are operable

on this page.

Search results

of log

information

will also be

displayed on

this page.

Control tab

Status display area

Operations for

setup of this

unit can be

performed on

this tab. Refer

to Network

Setup

Instructions for

further

information.

Setup tab

During live play display of

the current time.

During playback display of the

play time.

Current time/play time

display area

Recorded images and live

images will be displayed.

The setup menu will be

displayed while setting up.

Image display area

It is possible to mark

playback points or skip to the

latest recorded image.

Playback point

operation area

Controlling cameras by zooming, focusing and auto

panning can be performed on this page.

Camera tab

Operation for recorded images such as playback or

downloading (saving) recorded images can be

performed on this page.

HDD tab

Current status such us

playback status or recording

status will be displayed.

１

２

Browser window

User authentication window

Troubleshooting

Before requesting repair check the Troubleshooting List

in the Operating Instructions

2Error Messages

If one of the following error message is displayed, follow the instructions listed below.

Indication

ALT-* Recorder image has been altered. Playback will be paused.

Press the ALARM RESET button to cancel the error status.

Press the PLAY/PAUSE button to resume playback.

Cause / Instructions

SMART The hard disk may be malfunctioning and may not work correctly.

Press the ALARM RESET button to cancel the warning status.

Contact the dealer to replace the hard disk.

H-METER The set time for the HOUR METER has passed.

It may be reaching the end of the hard disk’s lifetime.

Press the ALARM RESET button to cancel the warning status.

Contact the dealer to replace the hard disk.

THERMAL Thermal error of the unit or the optional extension unit has been detected.

Press the ALARM RESET button to cancel the warning status. If thermal errors occur

frequently, the unit may be malfunctioning. Contact the dealer.

POWER The power outage alert signal is supplied from the UPS. When the internal processing

starts, recording will stop and all operations will be invalid.

Press the ALARM RESET button to cancel the warning status.

The unit will start operation automatically after the UPS start power supply.

#-nn% (available disk space low)

#-FULL (no available disk space)

The hard disk is almost full or completely full.

Press the ALARM RESET button to cancel the error or the warning status.

Initialize or replace the hard disk. When initialized, all recorded date will be deleted.

It is recommended to copy the data using an external recording device.

MEDIUM-n The external recording device is not operable because no disk or different format disk has

been inserted, etc. Press the ALARM RESET button to cancel the warning status.

Confirm that a disk has been inserted, or check the inserted disk format.

REMOVE An error has occurred on the hard disk and the hard disk has been unmounted from the

system automatically.

Press the ALARM RESET button to cancel the error status. Contact the dealer.

FAN The fan of this unit or the optional extension unit is malfunctioning. It may produce an

increase in temperature in the unit and cause malfunction of the HDDs.

The warning status will be canceled automatically after around 10 minutes of recovery.

Contact the dealer.

* : Camera number

# : Partition number

nn: Available disk space (percentage)

n : Port number to which an external recording device is connected

Distributed by:

WJ-HD316 Home Page

Digital Disk Recorder http://panasonic.co.jp/pss/hd300/en/index.html

CG040310 Version 1.0

Otros manuales para WJHD316 - DIGITAL DISK RECORDER

Tabla de contenidos

Otros manuales de DVR de Panasonic

Panasonic

Panasonic DMR-T3040 Manual de usuario

Panasonic

Panasonic Diga DMR-E95H Manual de usuario

Panasonic

Panasonic DMR-E30 Guía de inicio rápido

Panasonic

Panasonic Diga DMR-E95H Manual de usuario

Panasonic

Panasonic TU-CTH100 Manual de usuario

Panasonic

Panasonic WJ-HD716K Manual de usuario

Panasonic

Panasonic DMR-E85HP Manual de usuario

Panasonic

Panasonic AJ-SPD850MC Manual de usuario

Panasonic

Panasonic DMRE500H - DVD RECORDER DECK Manual de usuario

Panasonic

Panasonic DMRE75VP Manual de usuario

Panasonic

Panasonic Showstopper PV-HS2000 Manual de usuario

Panasonic

Panasonic TU-HDT104A Manual de usuario

Panasonic

Panasonic WJHD309 - DIGITAL DISK RECORDER Manual de usuario

Panasonic

Panasonic WJ-ND400K/G Manual de usuario

Panasonic

Panasonic WJ-HD616/1000 Manual de usuario

Panasonic

Panasonic WJ-NV200K Manual de usuario

Panasonic

Panasonic WJ-HD616/1000 Manual de usuario

Panasonic

Panasonic DMRHS2 - DVD RECORD.W/HD DRIV Manual de usuario

Panasonic

Panasonic WJ-NT104 Manual de usuario

Panasonic

Panasonic AVCCAM AG-HMR10P Manual de usuario

Panasonic

Panasonic DMR-EH80VEG Manual de usuario

Panasonic

Panasonic Diga DMR-E80H Manual de usuario

Panasonic

Panasonic WJ-GXD400 Manual de usuario

Panasonic

Panasonic ShowStopper PV-HS3000 Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario