Panasonic DMC-TZ25GW Manual de usuario
© Panasonic Corporation 2012 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO.DSC1209038AE
B26
Digital Camera
Model No. DMC-TZ25GW
Colour
(S)-------Silver Type
TABLE OF CONTENTS
PAGE PAGE
1Introduction-------------------------------------------------------- 2
2 Service Navigation ----------------------------------------------- 3
2.1. How to Define the Model Suffix (NTSC or PAL
model) -------------------------------------------------------- 3
3 Replacement Parts List ---------------------------------------- 6
4ExplodedView----------------------------------------------------- 7
Please use this manual together with the other documents for
Model No.DMC-TZ25EB/EE/EF/EG/EP/GC/GA/GN, ZS15P/PC/PU/GH/GK Order No. DSC1202004CE
2
1 Introduction
This Service Manual contains technical information which will help service personnel to understand and service the Digital Camera
DMC-TZ25GW.
The Digital Camera DMC-TZ25GW has been developed based on DMC-TZ25EG.
Since this Service Manual does not cover the same part which is already described in the Service Manual for DMC-TZ25EG,
when servicing, refer to the descriptions in the Service documents for
DMC-TZ25EB/EE/EF/EG/EP/GC/GA/GN, ZS15P/PC/PU/GH/GK Order No.DSC1202004CE
NOTE:
Compared with DMC-TZ25EG, the different parts are only the ones in the "Packing Parts & Accessories Section."
3
2 Service Navigation
2.1. How to Define the Model Suffix (NTSC or PAL model)
There are six kinds of DMC-TZ25/ZS15, regardless of the colours.
• a) DMC-ZS15P/PC
• b) DMC-TZ25EB/EF/EG/EP/GW
• c) DMC-TZ25EE
• d) DMC-TZ25GN
• e) DMC-ZS15GK
• f ) DMC-TZ25GC/GA, ZS15GH/PU
What is the difference is that the "INITIAL SETTINGS" data which is stored in Flash ROM mounted on Main P.C.B.
2.1.1. Defining methods
To define the model suffix to be serviced, refer to the nameplate which is putted on the bottom side of the Unit.
Note:
After replacing the Main P.C.B., be sure to achieve adjustment.
The Maintenance software (DIAS) is available at "software download" on the "Support Information from AVC" web-site in "TSN
system".
4
2.1.2. INITIAL SETTINGS:
After replacing the Main P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, be sure to read the following CAUTIONS.
2. PROCEDURES:
• Precautions: Read the above "CAUTION 1" and "CAUTION 2", carefully.
• Preparation:
1. Attach the Battery or AC Adaptor with a DC coupler to the unit.
2. Set the mode dial to the P (Program AE) mode.
Note: If the mode dial position is other than P (Program AE) mode, it does not display the initial settings menu.
•Step 1. The temporary cancellation of "INITIAL SETTINGS":
Set the REC/PLAYBACK selector switch to REC (Camera mark) .
While keep pressing "UP of Cursor button" and MOTION PICTURE button simultaneously, turn the Power on.
•Step 2. The cancellation of "INITIAL SETTINGS":
Set the REC/PLAYBACK selector switch to PLAYBACK.
Press "UP of Cursor button" and MOTION PICTURE button simultaneously, then turn the Power off.
•Step 3. Turn the Power on:
Set the REC/PLAYBACK selector switch to REC (Camera mark), and then turn the Power on.
•Step 4. Display the "INITIAL SETTINGS" menu:
Note: If the unit is other than P (Program AE) mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
•Step 5. Chose the model suffix in "INITIAL SETTINGS": (Refer to "CAUTION 1")
Select the area with pressing "UP/DOWN of Cursor buttons".
5
•Step 6. Set the model suffix at "INITIAL SETTINGS":
Press the "RIGHT of Cursor buttons".
The only set area is displayed. Press the "RIGHT of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
•Step 7. CONFIRMATION:
Confirm the display of "PLEASE SET THE CLOCK" in concerned language when the unit is turned on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
1) As for your reference, major default setting condition is as shown in the following table.
Default setting (After "INITIAL SETTINGS")
MODEL VIDEO OUTPUT LANGUAGE DATE REMARKS
DMC-TZ25GW PAL English Date/Month/Year
6
3 Replacement Parts List
[ Packing Parts and Accessories Section ]
Ref.No. Part No. Part Name & Description Pcs Remarks
301 RPFW0057 CAMERA BAG 1
302 VPK5262 PACKING CASE 1
304 ----- BATTERY PACK 1
305 VFF0971-S CD-ROM(SOFT/INSTRUCTION BOOK) 1
306 VSK0772 AC ADAPTOR 1
307 VQT4B41 BASIC O/I 1 (ENGLISH/CHINESE(TRADITIONAL))
308 K1HY08YY0025 USB CABLE W/PLUG 1
310 VFC4297 HAND STRAP 1
312 VPN7189 CUSHION 1
313 VPF1230 POLYETHYLENE COVER 1
7
4 Exploded View
[ Packing Parts and Accessories Section ]
Tabla de contenidos
Otros manuales de Cámara digital de Panasonic
Panasonic
Panasonic Lumix DMC-G3KPP Manual de usuario
Panasonic
Panasonic Lumix DMC-G3 Manual de usuario
Panasonic
Panasonic WV-CP474E Manual de usuario
Panasonic
Panasonic Lumix DMC-FZ30GN Manual de usuario
Panasonic
Panasonic DMC-SZ9 Manual de instrucciones
Panasonic
Panasonic Lumix DMC-FT20 Especificaciones técnicas
Panasonic
Panasonic Lumix DMC-TZ2P Manual de usuario
Panasonic
Panasonic DMC-SZ9EB Manual de usuario
Panasonic
Panasonic DMC-ZS30 Especificaciones técnicas
Panasonic
Panasonic AG-UX90EJ Guía del producto
Panasonic
Panasonic LUMIX DMC-FX75 Especificaciones técnicas
Panasonic
Panasonic DMCFX33 - DIGITAL STILL CAMERA Manual de instrucciones
Panasonic
Panasonic LUMIX DMC-FX38 Manual de usuario
Panasonic
Panasonic Lumix DMC-TS20 Instrucciones de instalación y servicio
Panasonic
Panasonic DMC-ZS25K Manual de usuario
Panasonic
Panasonic LUMIX DC-GX9N Especificaciones técnicas
Panasonic
Panasonic Lumix DMC-FZ10PP Manual de usuario
Panasonic
Panasonic LUMIX DMC-LS1GC Manual de usuario
Panasonic
Panasonic Lumix DMC-FS5P Manual de usuario
Panasonic
Panasonic Lumix DMC-GX7C Instrucciones de instalación y servicio
