Panasonic AW-UR100 Manual de uso y cuidado

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

1/8

AW-UR100 Firmware Update Procedure

Please be sure to read this first.

The update of AW-UR100 is performed via a network from Web setting screen on PC.

There might be accidents in the process of updating such as changing the settings and others by

mistake.

Please perform the update after taking every situation into careful consideration.

It is recommended that the current settings should be noted down in advance.

◆[ Disclaimer of warranty ]

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR

REPLACEMENT OR

REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO

BELOW.

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL,

CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT.

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION

OF THE USER.

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER.

(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON

OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT.

(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE

SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY.

(6) ANY INCONVENIENCE, DAMAGES OR LOSSES RESULTING FROM ACCIDENTS CAUSED BY AN

INADEQUATE INSTALLATION METHOD OR ANY FACTORS OTHER THAN A DEFECT IN THE PRODUCT ITSELF.

(7) LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.

(8) ANY DAMAGE OR CLAIMS DUE TO LOSS OR LEAKAGE OF IMAGE DATA OR SETTING DATA SAVED ON

THIS UNIT OR ON A MEMORY CARD OR COMPUTER.

◆[ Network security ]

As connected to a network, your attention is called to the following security risks.

(1) Leakage or disclosure of information transmitted via this unit

(2) Unauthorized use of this unit by a third person with malicious intent

(3) Interference or stoppage of this unit by a third person with malicious intent

It is your responsibility to take sufficient network security measures such as those described below to

protect yourself against the above risks.

+ Use this unit in a network secured by a firewall, etc.

+ If this unit is used in a system with a computer connected, make sure that checks for and removal of

computer viruses and malicious programs are implemented regularly.

+ Do not install the unit in a location where the unit, cables, and other parts may be easily damaged.

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

2/8

Preparing the update file

1. Download the latest software to the hard disk of your PC from web site.

https://eww.pass.panasonic.co.jp/pro-av/support/content/download/EN/ep2main/soft/ur100_note_e.htm

2. Extract the downloaded zip file to hard disk of your PC.

File name UPDATE.HDC

[NOTE]

Spaces and double-byte characters cannot be used for save directory.

Please do not change unzipped folderʼs name and files inside it.

EasyIPSetupToolPlus (Windows software tool)

[Supported OS] Windows 11, Windows 10

If you are using a Mac, update using a web browser.

1.Download the application file from the following web site.

https://eww.pass.panasonic.co.jp/pro-av/support/content/download/EN/ep2main/easyIPplus_e.htm

2. Extract the downloaded zip file, double-click [EasyIPSetupToolPlus.exe] in the folder

[DV91000536*] to start “EasyIPSetupToolPlus”.

Preparing the network setting

Setup the network setting by using “EasyIPSetupToolPlus”. [Network Setting] or [Auto IP]

LAN network example

AW-UR100

HUB

LAN straight cable

AW-UR100

LAN cross or

straight cable

LAN cross or

straight cable

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

3/8

Select an IP address for the personal computer within the private address range while ensuring that it is

different from the address of the unit. Set the subnet mask to the same address as the unit.

Example

AW-UR100 192. 168. 0. 10

PC 192. 168. 0. 100

Setting Initial Account

In the initial state, you need to set up an initial account.

By using “EasyIPSetupToolPlus”

Menu button [Administrator Registration]

Please refer to the EasyIPSetupToolPlus Operation Manual for details.

By using WEB Browser

1. Start your web browser and enter the IP address of the PTZ camera in the URL area.

Example：192.168.0.10

2. Enter the User name and Password to the Administrator registration screen.

Example User name: admin, Password:12345

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

4/8

Update procedure using EasyIPSetupToolPlus

A list of cameras on the network is displayed. You can confirm the camera version here.

1. [Firmware Update]

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

5/8

2. [Auto]

If your PC is connected to the internet, the application will identify PTZ cameras that need to be

upgraded. In addition, all operations from the download of the firmware file to the version upgrade

of the PTZ camera are performed by applications.

[Manual]

You can update using the firmware file downloaded and prepared in advance.

3. Mark the left column of the displayed camera IP address list and select the camera you want to update.

4. [User ID: Password: ]

Enter the ID and PW set as the initial account. And push the Input button.

5. [Firmware File: ]

In manual mode, specify the downloaded firmware file. And push the Input button.

6. [Update] Push the button to start the update.

Firmware update takes approx.10 min.

Do not power down or disconnect the LAN cable between the PC and Camera

while updating.

7. An update completion message will be displayed.

8. The update is completed by the above procedure. Please make sure your version is updated.

Please refer to the EasyIPSet up ToolPlus Operation Manual for details.

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

6/8

Update procedure using WEB Browser

1. Start your web browser and enter the IP address of the PTZ camera in the URL area.

Example：192.168.0.10

１．[SETUP]

２．Enter the ID and PW set as the initial account.

Example：User name: admin, Password:12345

３．[Product Info. ] You can confirm the camera version here.

４．[Firmware File: ] Push the [Select] button.

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

7/8

５．The following screen for selecting a file is displayed. Specify the downloaded firmware file

"UPDATE.HDC" and click the [Open] button.

６．[Execute] Push the button and push the [OK] button on the confirmation screen to start the update.

Firmware update takes approx.10 min.

Do not power down or disconnect the LAN cable between the PC and Camera

while updating.

Do not perform any other operations until the version is upgraded.

７．An update completion message will be displayed. ”Process has been completed successfully.”

８．The update is completed by the above procedure. Press [OK] to restart the camera.

AW-UR100 Update Procedure / Oct 2023

Panasonic Connect Co., Ltd.

8/8

The update was not completed

If you disconnected the LAN cable or the power supply during the update, please try again.

[<!>Update is failed]

- Please reconfirm the network settings, circumstances, ID and password.

- If [Power ON] or [Standby] is selected too quickly, the status selected and the display shown may not

correspond. In a case like this, press the [F5] key on the keyboard of the PC to restore the correct status

display.

Tabla de contenidos

Otros manuales de Cámara digital de Panasonic

Panasonic

Panasonic LUMIX DMC-FZ70 Manual de usuario

Panasonic

Panasonic LUMIX DMC-FZ28 Manual de usuario

Panasonic

Panasonic PVDC3000A Manual de usuario

Panasonic

Panasonic LUMIX DMC-G7 Especificaciones técnicas

Panasonic

Panasonic AW-HN130WP Manual de usuario

Panasonic

Panasonic DMC-G1K - Lumix Digital Camera Manual de usuario

Panasonic

Panasonic DMCLX1PP - DIGITAL STILL CAMERA Manual de usuario

Panasonic

Panasonic Lumix DMC-ZR3 Manual de usuario

Panasonic

Panasonic Lumix DMC-F3 Especificaciones técnicas

Panasonic

Panasonic Lumix DMC-G2K Manual de usuario

Panasonic

Panasonic DMC FX10 - Lumix Digital Camera Manual de instrucciones

Panasonic

Panasonic LUMIX DMC-TS30R Instrucciones de instalación y servicio

Panasonic

Panasonic Lumix DMC-LX5 Manual de usuario

Panasonic

Panasonic LUMIX DMC-GX1KPP Manual de usuario

Panasonic

Panasonic Lumix DMC-G7KS Manual de usuario

Panasonic

Panasonic DMC-ZS25K Instrucciones de instalación y servicio

Panasonic

Panasonic DMC-CM1 Instrucciones de instalación y servicio

Panasonic

Panasonic LUMIX DC-LX100M2 Instrucciones de instalación y servicio

Panasonic

Panasonic Lumix DMC-LZ20 Instrucciones de instalación y servicio

Panasonic

Panasonic DMCGF2 - DIGITAL CAMERA-ADV FEATURES Manual de usuario

Panasonic

Panasonic LUMIX DMC-LZ10 Manual de usuario

Panasonic

Panasonic DMC-XS1R Manual de usuario

Panasonic

Panasonic Lumix DMC-FH27 Manual de usuario

Panasonic

Panasonic DMC-ZS5K Manual de usuario

Manuales populares de Cámara digital de otras marcas

Mercury

Mercury 350K Manual de usuario

Pentax

Pentax Optio LS 465 Manual de usuario

Sanyo

Sanyo VPC-S1085 Manual de usuario

GE SMART A1255 Manual de usuario

Point Grey

Point Grey Gazelle Manual de usuario

Nikon

Nikon COOLPIX A Manual de usuario

Pentax

Pentax P-5 Manual de usuario

BlazeVideo

BlazeVideo A280 Manual de usuario

Sony

Sony MCA-20 Manual de usuario

Sony

Sony Alpha DSLR-A290 Manual de usuario

ATIK Cameras

ATIK Cameras One Manual de usuario

CohuHD Costar

CohuHD Costar 3930 Series Manual de usuario

Leica

Leica M10-R Manual de usuario

FujiFilm

FujiFilm FinePix A700 Manual de usuario

Lorex

Lorex LNZ81P25 Series Manual de usuario

GE J1470S Manual de usuario

Sony

Sony A6700 Guía del usuario

Canon

Canon EOS ELAN7 Manual de usuario