Panasonic MX-EX1031 Manual de usuario

English

Melayu

(Household Use)

(Kegunaan rumah tangga)

EN2

Safety Precautions .............................................................................................................................. EN2

Important Information ......................................................................................................................... EN4

Parts Names and Instructions ............................................................................................................ EN5

Before Use............................................................................................................................................ EN5

How to Use ........................................................................................................................................... EN6

Cleaning and Care ............................................................................................................................... EN7

Safety Lock ......................................................................................................................................... EN7

Overload and Overheating Protection .............................................................................................. EN7

Troubleshooting .................................................................................................................................. EN8

...................................................................................................................................... EN8

Safety Precautions

Please make sure to follow

these instructions.

WARNING

Do not allow infants and children to play with packaging material.

Do not disassemble, repair or modify this appliance.

Contact Panasonic Service Centre for inspection or repair.

Do not damage the power cord or power plug.

pulling, hanging

The following signals indicate the degree of harm and damage when the product is misused.

WARNING:

CAUTION:

Before using this product

please give your special attention to

“Safety Precautions”

and

“Important Information”

(P. EN2 - EN4).

Please keep this Operating Instructions for future use.

these instructions.

Contents

EN3

English

Do not plug or unplug the power plug with wet hands.

Do not use the appliance if the power cord or power plug is damaged or the power plug is

loosely connected to the outlet.

Do not immerse the motor housing, power cord or power plug in water, or splash it with

water and

or any liquid.

This appliance is not intended for use by persons (including children) with reduced

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Keep the appliance and its power cord out of reach of children.

Discontinue using the appliance immediately and unplug in the unlikely event that this

appliance stops working properly.

The appliance power fails.

There is an unpleasant smell.

Contact Panasonic Service Centre for inspection or repair.

Make sure the voltage indicated on the label of the appliance is the same as your local supply.

Also avoid plugging other devices into the same outlet to prevent electric overheating. However,

rated wattage of the outlet.

Be careful if hot liquid is poured into the blender jug as it can be ejected out of the

appliance due to a sudden steaming.

WARNING

Do not use the appliance on the following places.

Near a wall or furniture.

Do not blend or place over 60 °C ingredients into the blender jug.

Do not put any liquids or wet ingredients into mill container. (MX-EX1011, MX-EX1031 only)

CAUTION

EN4

Do not use the appliance outdoors.

Do not drop the appliance or attachments to avoid damaging it.

Do not wrap the power cord around the motor housing.

Do not operate the appliance without ingredients.

jug while the appliance is operating.

Do not stretch the gasket to avoid deforming.

Do not replace any parts of the appliance with non-genuine spare parts.

Do not carry the appliance by holding the power cord, blender jug or mill container.

Do not insert any object in the gaps of the appliance.

Do not blend more than the working capacity marked on the blender jug.

Do not use prohibited ingredients as stated in this instructions. (P. EN5)

Do not push the safety lock pin with any implement such as thin stick, etc. (P. EN7)

Unplug the plug when the appliance is not in use.

Make sure to hold the power plug when unplugging it. Never pull on the power cord.

Beware not to trip over or get caught in the power cord while in use.

In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance

Care shall be taken when handling the sharp blades, emptying the blender jug, mill

container and during cleaning. Do not clean the blender blade or mill blade by bare hand.

Always disconnect the appliance from the supply if it is left unattended and before

assembling, disassembling, moving or cleaning.

approaching parts that move in use.

Ensure to clean the appliance especially surfaces in contact with food after use. (P. EN7

"Cleaning and Care")

This product is intended for household use only.

Important Information

CAUTION

Safety Precautions

Please make sure to follow

these instructions.

EN5

English

Meat

Fish

Prohibited Ingredients

Foods Time

Pepper 20

Dried chilies 20

Blender Dry mill

in the mill container.

use again.

Handling Precautions Handling Precautions

Before Use

and then

assemble them securely. (P. EN 6 “How to Use” and P. EN7 “Cleaning and Care” )

The dry mill is intended for

The blender is intended for

Blending fluids

Pureeing cooked ingredients

Note:

Lid

Power plug

Power cord

Motor housing

Blender Dry mill

000 mL)

opening. Do not use with

lid off.

Scraper

Accessory

Mill container

Mill gasket

Parts Names and Instructions

(continuous operation)

OFF

Pulse

turned to "P" position)

How to use the scraper

To avoid ingredients splattering, it is recommended to insert the scraper from the lid opening

Scraper is useful when

ingredients stick to the inner side of container. (e.g. garlic, chile pepper)

turn the rotary switch to "

0 " position to switch off. Unplug.

Turn the blender jug

anticlockwise to remove it,

open the lid and take out

the ingredients.

Align the on the motor

housing with the on the mill

container.

Twist mill container clockwise

When grinding is completed,

turn the rotary switch to

" 0" position to switch off. Unplug.

Turn the mill container

anticlockwise to remove it,

open the mill container, and

take out the ingredients.

Turn the mill container upside down and place the

ingredients in it. Twist the mill container base

clockwise until you hear a click sound.

Attach blender jug to the motor housing.

Blender Dry mill

Place the ingredients into blender jug, and then close the lid.

To disassemble

Turn anticlockwise

Align the on the motor

housing with the on the

Plug in. Hold the blender jug, and then turn the rotary

switch to " 1 " position to start.

If the appliance stops

during operation. (P. EN8)

If the appliance stops during

operation. (P. EN8)

Attach the mill container to the motor housing.

Plug in. Hold the mill container, and then turn the rotary

switch to "1" position to start.

How to Use

To assemble

Turn clockwise

Make sure the mill

gasket is not damaged

EN7

English

The safety lock has been designed to prevent the blender from

switching on when blender jug or mill container is not properly in place.

In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.

After rotation stops, follow the below steps:

Turn the rotary switch to "0" position, unplug the appliance.

Remove blender jug or mill container from motor housing.

Reduce the ingredients to less than half. (For blender jug, it also can add liquid.)

Reset the blender jug or mill container, start blending again.

If the appliance still does not operate after performing the above, overheating protection has been activated.

Turn the rotary switch to "0" position, unplug and rest the appliance for about 15 minutes or more (until motor housing returns to a

normal temperature) to release overheating protection before using again.

(If appliance still does not operate, contact Panasonic Service Centre for inspection or repair.)

Cleaning and Care

Safety Lock

Overload and Overheating Protection

Motor housing

Wipe motor housing with a damp cloth.

Containers and other parts

Wash each part in cold or lukewarm water with a soft sponge.

Carefully clean blades with a brush.

Rinse and dry thoroughly.

(Brush is not provided.)

Mill container base

Carefully clean blades with a brush. Do not use water.

(Brush is not provided.)

Blender jug prewash

Storing

EN8

Blender & Dry mill

Even turn to "1"

position, the

appliance

does not start

blending.

The blender jug

mill container is not set properly.

mill container and motor housing, then twist

The mill container base is not assembled tightly. (MX-EX1011, MX-EX1031 only)

The protection device of overload or overheating is activated.

Refer to “Overload and Overheating Protection” for inspection. (P. EN7)

The power plug is disconnected.

Rotation stops

abruptly.

The protection device of overload or overheating is activated.

Refer to “Overload and Overheating Protection” for inspection. (P. EN7)

There is abnormal

noise or vibration

increases.

Too much ingredients.

Reduce ingredient amount.

The mill container base is not assembled tightly.

(MX-EX1011, MX-EX1031 only)

The ingredient is

leaking.

The mill container base is not assembled tightly.

The mill gasket is not attached or attached loosely.

Foreign matters are attached to the mill gasket.

Remove them.

The mill gasket is damaged.

Contact Panasonic Service Centre to replace it.

Blender

The blade is idling.

The liquid amount is not enough.

Too much ice cubes.

When the blender is used When the dry mill is used

(MX-EX1011, MX-EX1031 only)

Power supply 220 240 V 50

Power consumption 230

Rated time

Continuous operation Continuous operation

(

)

Working capacity

000 50

Dimensions

H353 257

Check following points before calling or arranging for repair.

Problem Cause and Action

Troubleshooting

SC2

SC3

Otros manuales para MX-EX1031

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Licuadora de Panasonic

Panasonic

Panasonic MX-GX1561 Manual de usuario

Panasonic

Panasonic MX-EX1511 Manual de usuario

Panasonic

Panasonic MX-MC121P1 Manual de usuario

Panasonic

Panasonic MX-EX1081 Manual de usuario

Panasonic

Panasonic MX-101SG1WTN Manual de usuario

Panasonic

Panasonic MX-SM1031 Manual de usuario

Panasonic

Panasonic MJ-DJ31 Manual de usuario

Panasonic

Panasonic MX-GS1WSK Manual de usuario

Panasonic

Panasonic MX-S101 Manual de usuario

Panasonic

Panasonic MX-EX1021 Manual de usuario

Panasonic

Panasonic MX-KM5060 Manual de usuario

Panasonic

Panasonic MX-151SG2WTN Manual de usuario

Panasonic

Panasonic MX-KM5080 Manual de usuario

Panasonic

Panasonic MX-GX1061WTN Manual de usuario

Panasonic

Panasonic MX-900M Manual de usuario

Panasonic

Panasonic MJ-W176PWTC Manual de usuario

Panasonic

Panasonic MX-KM3070 Manual de usuario

Panasonic

Panasonic MX-GS1 Manual de usuario

Panasonic

Panasonic MX-MG5351 Manual de usuario

Panasonic

Panasonic MX-XP101 Manual de usuario

Panasonic

Panasonic MX-M300 Manual de usuario

Panasonic

Panasonic MX-ZX1800 Manual de usuario

Panasonic

Panasonic MX-101SP2WTB Manual de usuario

Panasonic

Panasonic MX-SM1031 Manual de usuario

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Black & Decker

Black & Decker BLC18750DM Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Black & Decker

Black & Decker BL8000 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Ninja

Ninja NN210Q Manual de usuario