Panasonic KX-HNS103 Manual de usuario

Installation Guide

Home Network System

Water Leak Sensor

Model No. KX-HNS103

Thank you for purchasing a Panasonic product.

This document explains how to install the water leak sensor properly.

For details about how to use the system, refer to the User’s Guide

(page 15).

Please read this document before using the unit and save it for future

reference.

For assistance, please contact us at 1-800-272-7033 or visit our Web

site: www.panasonic.com/support for customers in the U.S.A. or

Puerto Rico.

Please register your product: www.panasonic.com/prodreg

Printed in China

HNS103_(en_en)_1120_ver.010.pdf 1 2014/11/19 19:26:58

Introduction
Accessory information ...............3
Important Information
About this system ......................4
For your safety ...........................4
Important safety instructions ......5
For best performance ................5
Other information .......................6
Setup
Part names and functions ..........8
About the LED indicator .............8
Setup overview ..........................8
Inserting the battery ...................9
Registering the sensor ...............9
Information about sensor
features ....................................10
Wireless communication
range .......................................10
Installation ...............................11
Appendix
Features available when using the
[Home Network] app ................15
Accessing the User’s Guide ....15
Specifications ..........................16
FCC and other information ......17
Customer services ...................18
Warranty (For United States and
Puerto Rico) .............................19
2
Table of Contents
HNS103_(en_en)_1120_ver.010.pdf 2 2014/11/19 19:26:58

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

ABattery*11

BWall mounting adaptors*22

CWall mounting screws (25 mm (1 inch))*3/XTB4+25AVW 3

*1 When replacing the battery, see “Power source” of “Specifications”, page 16

for battery information.

*2 1 adaptor for the main unit: PNHR2107Z

1 adaptor for the probe unit: PNHR2108Z

*3 2 screws for the main unit and 1 screw for the probe unit

AB C

Other information

RDesign and specifications are subject to change without notice.

RThe illustrations in these instructions may vary slightly from the actual product.

Trademarks

RiPhone and iPad are registered trademarks of Apple Inc.

RAndroid is a trademark of Google Inc.

For assistance, please visit www.panasonic.com/support 3

Introduction

HNS103_(en_en)_1120_ver.010.pdf 3 2014/11/19 19:26:58

About this system

This system is an auxiliary system; it is

not designed to provide complete

protection from property loss.

Panasonic will not be held responsible

in the event that property loss occurs

while this system is in operation.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

RUse only the power source marked

on the product.

RDo not connect non-specified

devices.

Installation

RTo prevent the risk of fire or

electrical shock, do not expose the

product to rain.

RDo not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

RDo not allow the cable to be

excessively pulled, bent or placed

under heavy objects. Keep the main

unit upright at all times.

RKeep small parts (screws, etc.) out

of the reach of children. There is a

risk of swallowing. In the event they

are swallowed, seek medical advice

immediately.

Operating safeguards

RDo not disassemble the product.

Medical

RConsult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

RDo not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CR Lithium battery

RDo not recharge, disassemble,

remodel, heat or throw it into fire.

RDo not touch the terminals and

with metal objects.

RRisk of explosion if battery is

replaced by an incorrect type.

Dispose of used battery according to

local regulations.

RIf any electrolyte should come into

contact with your hands or clothes,

wash it off thoroughly with water.

RIf any electrolyte should come into

contact with your eyes, never rub

your eyes. Rinse your eyes

4For assistance, please visit www.panasonic.com/support

Important Information

HNS103_(en_en)_1120_ver.010.pdf 4 2014/11/19 19:26:58

thoroughly with water, and then

consult a doctor.

CAUTION

Installation and location

RAlthough this unit conforms to the

IPX4*1 specification, do not

intentionally expose it to water.

*1 IPX4 indicates that the unit is

not harmfully affected by water

sprayed on it from any direction.

CR Lithium battery

RUse only the battery noted on

page 3.

RInsert the battery correctly.

RDo not leave the battery in an

automobile exposed to direct

sunlight for a long period of time with

the doors and windows closed.

RRemove the battery if you do not

use the product for a long period of

time. Keep it in a cool, dark area.

RDo not replace a battery with wet

hands.

RKeep out of the reach of small

children. There is a risk of

swallowing. If the battery is

swallowed, seek medical attention

immediately.

RRemove the battery if it becomes

unusable. There is a risk of leakage,

overheating, and rupture. Do not

attempt to use a battery if it is

leaking.

RExercise care when handling the

batteries. Do not allow conductive

materials such as rings, bracelets, or

keys to touch the batteries,

otherwise a short circuit may cause

the batteries and/or the conductive

material to overheat and cause

burns.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Use only the batteries indicated in

this document. Do not dispose of

batteries in a fire. They may

explode. Check with local codes for

possible special disposal

instructions.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

RFor maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

For assistance, please visit www.panasonic.com/support 5

Important Information

HNS103_(en_en)_1120_ver.010.pdf 5 2014/11/19 19:26:58

RIf the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

RKeep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

RThe product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

RThe product should not be exposed

to direct sunlight.

RDo not place heavy objects on top of

the product.

RThe product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

temperature is less than 0 °C (32 °F)

or greater than 40 °C (104 °F).

ROperating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Other information

CAUTION: Risk of explosion if battery

is replaced by an incorrect type.

Dispose of used batteries according to

the instructions.

Routine care

RWipe the outer surface of the

product with a soft moist cloth.

RDo not use benzine, thinner, or any

abrasive powder.

RIf the probe unit’s metal probes

become dirty or oily, the product

may not detect water. Clean the

metal probes with detergent if

necessary.

Information on Disposal in other

Countries outside the European

Union

123

These symbols (A, B, C) are only

valid in the European Union. If you

wish to discard these items, please

contact your local authorities or dealer

and ask for the correct method of

disposal.

Note for the battery removal

procedure

Refer to “Inserting the battery” on

page 9.

6For assistance, please visit www.panasonic.com/support

Important Information

HNS103_(en_en)_1120_ver.010.pdf 6 2014/11/19 19:26:58

Notice

For assistance, please visit www.panasonic.com/support 7

Important Information

HNS103_(en_en)_1120_ver.010.pdf 7 2014/11/19 19:26:58

Part names and

functions

n Main unit

n Probe unit

Main unit cover

M N

Used to confirm the status of the

sensor or register the sensor to

the hub.

LED indicator

About the LED

indicator

You can press M N and check the

LED indicator to confirm the sensor’s

status.

Indicator Status

Green, lit No water detected

Red, lit Water detected

Red,

blinking

Sensor is out of range

of the hub

Green,

blinking

Registration mode

(You pressed and held

MN)

Off No battery power

Note:

RThe LED indicator does not indicate

sensor status if the sensor has not

been registered (page 9).

Setup overview

1Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2Insert the battery

The sensor is battery powered.

3Registration

Required only if the sensor was

purchased separately (i.e., not as

part of a bundle).

4Confirm the installation area

Read the information in this

document to confirm that the

8For assistance, please visit www.panasonic.com/support

Setup

HNS103_(en_en)_1120_ver.010.pdf 8 2014/11/19 19:26:58

desired installation area is suitable

to proper operation.

5Installation

Install the sensor in the desired

location.

Inserting the battery

RUSE ONLY a CR2 Lithium battery.

RConfirm the polarities ( , ).

1Remove the main unit cover.

RLift from the indented area (A)

and open the main unit cover

(B).

2Insert the battery.

3Attach the main unit cover.

Registering the

sensor

This procedure is not required for

devices that were included as part of

a bundle.

Before you can use the sensor, it must

be registered to the hub.

If you purchased devices separately

(i.e., not as part of a bundle), you must

You can register each device by using

the registration buttons or the [Home

Network] app.

Using registration buttons

1Hub:

Press and hold M OTHER

DEVICEN until the LED indicator

blinks in green.

2Sensor:

Remove the main unit cover and

press and hold MN until the

LED indicator blinks in green

(page 8).

RWhen registration is complete,

the hub sounds one long beep.

Note:

RTo cancel registration, press MN

on the hub and on the sensor.

RIf registration fails, the hub sounds

several short beeps.

Using the app

When you register the sensor by using

the [Home Network] app, you can

assign a name to your devices and

group them by location. For more

For assistance, please visit www.panasonic.com/support 9

Setup

HNS103_(en_en)_1120_ver.010.pdf 9 2014/11/19 19:26:58

ケーブルが取り外

し可能の誤解を与

える可能性があり

ますので、次校に

てケーブル有りの

状態に修正致しま

す。

information, refer to the User’s Guide

(page 15).

Information about

sensor features

Please read the following information

before deciding where to install the

sensor.

Note:

RThe sensor is not designed to be

used in situations that require high

reliability. We do not recommend

use of the sensor in these situations.

RPanasonic takes no responsibility for

any injury or damage caused by the

use of this product.

Wireless

communication

range

The wireless communication range of

each device in the system from the hub

is approximately 50 m (160 feet)

indoors and approximately 300 m

(1,000 feet) outdoors. Wireless

communication may be unreliable

when the following obstacles are

located between the hub and other

devices.

RMetal doors or screens

RWalls containing aluminum-sheet

insulation

RWalls made of concrete or

corrugated iron

RDouble-pane glass windows

RMultiple walls

RWhen using each device on

separate floors or in different

buildings

Note:

RYou can check the sensor’s

communication status by pressing

M N. If the LED indicator is lit in

green or red, the sensor is

communicating properly with the

hub. If the LED indicator blinks in

red, it is out of range of the hub.

10 For assistance, please visit www.panasonic.com/support

Setup

HNS103_(en_en)_1120_ver.010.pdf 10 2014/11/19 19:26:58

Otros manuales para KX-HNS103

Tabla de contenidos

Otros manuales de Accesorios de Panasonic

Panasonic

Panasonic EX-FC1 Manual de usuario

Panasonic

Panasonic UE-608040 Manual de usuario

Panasonic

Panasonic CX-400 Series Manual de usuario

Panasonic

Panasonic S-Link SL-PCAT Manual de usuario

Panasonic

Panasonic MA271110G Manual de usuario

Panasonic

Panasonic EX-F70 SERIES Manual de usuario

Panasonic

Panasonic MA2SD300G Manual de usuario

Panasonic

Panasonic MAZ9xxxH Series Manual de usuario

Panasonic

Panasonic HL-C2 Series Manual de usuario

Panasonic

Panasonic GP-A5S Manual de usuario

Panasonic

Panasonic NN-TK922SS Manual de usuario

Panasonic

Panasonic MALS068G Manual de usuario

Panasonic

Panasonic CF-VPF Series Manual de usuario

Panasonic

Panasonic WRT 3367-8 Manual de usuario

Panasonic

Panasonic MIR-H163-PA Manual de usuario

Panasonic

Panasonic CX-400 Series Manual de usuario

Panasonic

Panasonic MA4Z159 Manual de usuario

Panasonic

Panasonic KX-HNS103EX Manual de usuario

Panasonic

Panasonic HL-C235BE Manual de usuario

Panasonic

Panasonic WV-TW310L Manual de usuario

Panasonic

Panasonic MA27077 Manual de usuario

Panasonic

Panasonic WX-LA20 Manual de usuario

Panasonic

Panasonic TH-50PB2E Manual de usuario

Panasonic

Panasonic LA-511 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario