Pace TD-100 Manual de usuario

www.paceworldwide.com

Solutions and systems for soldering, rework and repair of electronics www.paceworldwide.com

Process Guide I-QFP-02

QFP Installation

Mini Wave

Equipment Required

PACE Intelliheat®Power Supply

TD-100 Thermo-Drive®Soldering Iron

Mini-Wave®Tip (See Chart on Back)

Tip Tool

HP-65 HandiPik®

Optional Equipment

Tweezer

Materials

Flux-cored Solder

Flux

Cleaner

Procedure

1. Set a tip temperature of 343°C (650°F) for lead-free

or 316°C (600°F) for leaded alloys and adjust as

necessary.

2. Install selected Mini-Wave®tip into the TD-100 using

Tip Tool.

3. Position the component ensuring proper lead-to-land

alignment. Hold the component in place using the

HandiPik®or tweezers.

4. Apply ﬂux and tack solder opposing corner leads.

5. Apply ﬂux to ALL lead/land areas.

6. Clean tip on Tip & Tool Stand sponge.

7. Apply solder to the cupped portion of tip to create a

convex bead of molten solder.

8. Position Mini-Wave®tip so the solder bead contacts

the top portion of leads. Slowly move tip over one row

of leads to form proper solder ﬁllets at each joint.

9. Repeat steps 6 through 8 on remaining sides of

component.

10. Re-tin Mini-Wave®tip with solder. Return TD-100 to

its Tip & Tool Stand.

11. Clean, if required, and inspect.

A

A

B

C

Position Component

C

Flux Leads

B

Tack Lead

D

Fill Tip

© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly

(001) 910-693-8620 (USA) 877-882-7223

TD-100

D

E

E

Solder Component

Solutions and systems for soldering, rework and repair of electronics www.paceworldwide.com

Process Guide I-QFP-02

TD-100 Tips

© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly

(001) 910-693-8620 (USA) 877-882-7223

Tips Description Tip Size - L Size - D Part Number

MiniWave®N/A 3.05mm (.120") 1124-0032-P1

Angled MiniWave®N/A 3.05mm (.120") 1124-0033-P1

Single Sided Chisel N/A 3.05mm (.120") 1124-0034-P1

Angled MiniWave®N/A 2.11mm (.083") 1124-0035-P1

Single Sided Chisel, Fine Pitch N/A 1.5mm (.06") 1124-0038-P1

Angled MiniWave®, Fine Pitch N/A 1.6mm (.064") 1124-0039-P1

MicroFine Single Sided Chisel N/A 0.9mm (.035") 1124-0040-P1

MicroFine Single Sided Chisel N/A 1.1mm (.045") 1124-0041-P1

Angled Micro-Wave N/A 1.1mm (.045") 1124-0045-P1

Micro-Wave N/A 1.1mm (.045") 1124-0046-P1

Single Sided Chisel 17.00mm (0.693") 4.55mm (0.178") 1124-0048-P1

MiniWave®N/A 2.79mm (0.110") 1124-0049-P1

Otros manuales para TD-100

3

Otros manuales de Pistola de soldar de Pace

Manuales populares de Pistola de soldar de otras marcas

Bakon

Bakon 3200 Manual de usuario

Proxxon

Proxxon Gaslotset MGS Manual de usuario

jbc

jbc SFR-A Manual de usuario

jbc

jbc CL8010 Manual de usuario

HAKO

HAKO FX-8804 Manual de usuario

SATA

SATA 02002A Manual de usuario

Velleman

Velleman HRJA151 Manual de usuario

Weller

Weller WSM 1 Manual de usuario

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje

ersa

ersa i-CON 1V Manual de usuario

Hakko Electronics

Hakko Electronics FX-100 Manual de usuario

Weller

Weller WAD 101 Manual de usuario

Weller

Weller WXD 2 Manual de usuario

AlienTek

AlienTek T100 Manual de usuario

Atten

Atten ATETOOL AT-689A Manual de usuario

Surtek

Surtek 112554 Dimensiones y guía de instalación

Parkside

Parkside PLBS 30 A1 Manual de usuario

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manual de usuario