Ozone Neon Manual de usuario
2
USER MANUAL
It’s all about evolution
2
1. Operation System: Windows XP / Vista / 7 / 8
2. Free USB 1.1/ 2.0 port
3. CD-ROM drive
4. 50 MB free hard disk space
1. Right to left hand user mode: click both left button (1) + scroll button (3) for 5 seconds.
2. Left to right hand user mode: click right button (2) + scroll button (3) for 5 seconds.
1. Plug USB connector of NEON to a USB port of your PC
2. Insert the enclosed driver CD into your CD-ROM drive
(or download the driver from www.ozonegaming.com)
3. Double Click “Setup.exe” to start the installation program. Click “Next” to continue
4. Select the folder to save the driver and click “Next” to continue
5. Installation will run automatically; click “Finish” to complete the installation
System RequirementS
InstallatiOn InstructiOnS
Left/Right Hand User Swap
6
u
3
System RequirementS
InstallatiOn InstructiOnS
Left/Right Hand User Swap
MAIN NEON DRIVER SKIN
NEON
4
1. Polling Rate Settings.
2. On-To-Go Speed Settings (Speed of repeat mouse functions, refer to 2.6 Mouse
Function)
3. Reset to Factory Default: In the pop-up window, click “OK” to apply the changes.
mOuse CONFIGURATION
1. ADVANCED SETTINGS:
k
u
5
MACRO MANAGER
Macro is a series of desired keystrokes which can be assigned to the mouse once
recorded. In other words, it is a series of key press and releases, in which every
keystroke pressed, released, and delays are recorded.
2. buttON SETTINGS:
6
Create and Assign a Macro
1. Select a button and click ”Macro Manager” from the menu.
2. In the pop-up window, click “NEW” and give the macro a personalized name, then
start to create the macro.
3. Select the options of “Record Delays” and set the “Loop Times” from the right
column if needed.
4. Click ”Start Record” type your desired keys and click “Stop Record” when
finished. Click “OK” to continue.
5. Assign one of the “Marco” created to a “Button” and click “APPLY” to complete
the settings.
7
NEON
multimedia
1. Select a button and click ”Multimedia” from the menu.
2. Select the desired function in the sub-menu and click “APPLY” to confirm the
settings.
8
PROFILE SWITCHING
1. Select a button and click ”Profile” from the menu.
2. Select the desired function in the sub-menu and click “APPLY” to confirm the settings.
Profile Cycle: Cycle Switching / Profile Up: Profile + / Profile Down: Profile -
9
CPI/DPI Switching
1. Select a button and click ”CPI Switch” from the menu.
2. Select the desired function in the sub-menu and click “APPLY” to confirm the settings.
CPI Cycle: Cycle Switching / CPI Up: DPI level +/ CPI Down: DPI level -
10
WINDOWS MANAGEMENT
1. Select a button and click ”Windows” from the menu.
2. Select the desired function in the sub-menu and click “APPLY” to confirm the settings.
Tabla de contenidos
Otros manuales de Ratón de Ozone
Ozone
Ozone neon3k Manual de usuario
Ozone
Ozone radon 3K Manual de usuario
Ozone
Ozone Exon V30 Manual de usuario
Ozone
Ozone Neon m50 Manual de usuario
Ozone
Ozone Neon X40 Manual de usuario
Ozone
Ozone Argon Manual de usuario
Ozone
Ozone Neon X40 Manual de usuario
Ozone
Ozone Exon X90 Manual de usuario
Ozone
Ozone neon 3K Manual de usuario
Ozone
Ozone NEON M10 Manual de usuario
