Ozone Argon Manual de usuario
2
USER MANUAL
It’s all about evolution
1
1. Operation System
Windows XP / Windows Vista / Windows 7 / Windows 8 / Windows 8.1
2. Free USB 1.1/ 2.0 port
3. CD-ROM drive
4. 50 MB free hard disk space
1. Plug USB connector of ARGON OCELOTE to a USB port of your PC
2. Insert the enclosed driver CD into your CD-ROM drive
(or download the driver from www.ozonegaming.com )
3. Double click “Setup.exe” to start the installation program.
Click “Next” to continue
4. Select the folder to save the driver and click “Next” to continue
5. Installation run automatically; click “Finish” to complete the installation
System RequirementS
InstallatiOn InstructiOnS
ARGON
6
u
2 3
MOUSE CONFIGURATION
ARGON OCELOTE DRIVER
1. Polling Rate Setting
2. On-To-Go Speed Setting, Speed of repeat mouse function (refer to
2.6 Mouse Function)
3. Reset to Factory Default: In the pop-up window, click “OK” to
APPLY the change
1. Advanced Settings:
4 5
1. MACRO MANAGER
Macro is a series of desired keystrokes which can be recorded and
assigned to the keyboard. In other words, it’s a series of key press
and releases, in which every pressed keystrokes, released keystrokes,
and delays are been recorded. The delay is the duration between the
keys “press and release” or “release and press”, that is automatically
recorded and output once the macro is assigned.
2. BUTTON Settings:
6 7
Create and Assign a Macro
1. Select a button and click ”Macro Manager” from the menu
2. In the pop-up window, click “NEW” and enter a name for the
macro, then start to create the macro
3. Select the options of “Record Delays” and set the “Loop Times”
from the right column if needed
4. Click ”Start Record” type the desired key combination and click
“Stop Record” when you are finished. If needed “Right Click” on one
of the keys in the sequence to edit it. Click “OK” to continue
5. Assign a created “Macro” to a “Button” and click “APPLY” to
complete the setting
8 9
2. Multimedia
1. Select a button and click ”Multimedia” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting
3. PrOfile Switching
1. Select a button and click ”Profile” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting. Profile Cycle: Cycle Switching /
Profile Up: Profile + / Profile Down: Profile -
10 11
4. CPI/DPI Switching
1. Select a button and click ”CPI Switch” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting. CPI Cycle: Cycle Switching / CPI Up: DPI level +
/ CPI Down: DPI level -
5. WindOws Management
1. Select a button and click ”Windows” from the menu
2. Select the desired function in the sub-menu and click “APPLY” to
confirm the setting
12 13
6. MOuse FunctiOns
1. Select a button and click the desired mouse function in the menu:
“Click”, “Menu”, “Wheel Click”, “Double-click”, “IE Forward”, “IE
Backward”, “Scroll Up”, “Scroll Down”, “ Tilt Left”, “Tilt Right”,
“Fire Button”, “On-To-Go (This is a combination button used to get
a continuous mouse function: Hold down this button together with
any other button with an assigned mouse function to get a continuous
repeated mouse function)”.
2. Then, click “APPLY” to confirm the setting
7. Assign a ShOrtcut
Single mouse click to activate a combination of keys which used often
1. Select a button and click “Assign a Shortcut” from the menu
2. Select and enter the desired combination of keys from the pop-up
window and click “OK” to continue
3. Click “APPLY” to complete the setting.
Ex. now the “Ctrl” + “V” will be executed
14 15
8. ButtOn Off: Disable the buttOn functiOn
1. Select a button and click ”Button Off” from the menu
2. Then, click “APPLY” to confirm the setting
9. Assign a Launch
Single mouse click to launch your chosen PC software
1. Select a button and click “Assign a Launch” from the menu
2. In the pop-up window, select the desired software from the folder
and click “OK” to continue
3. Click “APPLY” to complete the setting
16 17
10. WindOws Key
1. Select a button and click ”Windows Key” from the menu
2. Then, click “APPLY” to confirm the setting
11. OPEN DRIVER
1. Select a button and click ”Open Driver” from the menu for quick
access to the Mouse Configuration Driver
2. Then, click “APPLY” to confirm the setting
Tabla de contenidos
Otros manuales de Ratón de Ozone
Ozone
Ozone Exon X90 Manual de usuario
Ozone
Ozone Neon X40 Manual de usuario
Ozone
Ozone neon3k Manual de usuario
Ozone
Ozone Neon Manual de usuario
Ozone
Ozone Exon F60 Origen Manual de usuario
Ozone
Ozone Neon X40 Manual de usuario
Ozone
Ozone NEON M10 Manual de usuario
Ozone
Ozone radon 3K Manual de usuario
Ozone
Ozone Exon V30 Manual de usuario
Ozone
Ozone neon 3K Manual de usuario
