Overmax CamRoad-6.1 Manual de usuario

CamRoad-6.1

USER MANUAL

English

THE APPEARANCE & DESCRIPTION

Name Function

1. [USB Interface]

Charger interface - Connect with micro USB

cable

. [GPS Interface]

When connected with GPS module, while

receiving regular GPS satellite signals, you can

record and display current driving location.

3. [ON/OFF] Press ON to turn the camera on; when the

camera is on, press OFF to turn it off.

4. [Reset]

Use it to reboot the system when it crashes or

the device doesn't respond.

5. [MIC] Thanks to it you can record sound.

6. [Display] .7” TFT High resolution LCD

7. [

Indicator Lam

p] Red when Charging; Blue when the device is

turned on. Blue light flashes during recording.

8. [Camera Lens] Thanks to it you can take videos & pictures

9. [Speaker] Performance sound & Playback sound

10. [Light] Supplementing light to enhance the brightness

in dark environments.

11. [OK] Record / Stop Recording / Take a photo/ OK

Confirm Button

1 . [HDMI] High Definition TV Connection via HDMI port.

Mini HDMI cable required.

13. [M] Short press to display Menu; Long press (3

seconds) to use it as the Mode button

In recording mode, short press to lock the file;

long press (3 seconds) to turn the MIC On/Off

14. [UP] Move up the selection in a Menu or Increase

Digital Magnification

15. [TF Slot] Supported TF Cards up to 3 GB

16. [Down]

Move down the selection in a Menu or

Decrease Digital Magnification

FEATURES & OPERATION

Setting

Insert the CLASS4 or higher speed TF Card into your Car DVR,

and mount it by the rear view mirror, or in any other desired position.

Then plug in the car charger. Now the Camcorder is ready to use.

Sta ting the Ca DVR

Press and hold [ON/OFF] button to turn on the car DVR, or

connect it to the car charger so that the device can start

automatically.

Note: During the engine start the current suddenly increases.

Although the device has the function of automatic start (when the

ignition is on) we cannot guarantee that the strong vehicle current will

not damage the DVR. We strongly recommend to first start the

vehicle, THEN connect the car charger and use the manual boot

mode.

Batte y Cha ging & USB Connection

1. The red charging indicator is on while charging.

. Plug in the USB cable to connect with computer, press [Up] &

[Down] to select "Storage" or "PC Camera" and press [OK] to confirm.

Then you can use the DVR as a "Removable Disk" or a "Webcam".

Switching Mode

This car DVR has three operating modes: video, photo &

playback. The default one is a video recording mode (when you

power the device on). To switch between the modes short press [M]

button.

Reco ding videos

1. Press [OK] to record. Use [Up] & [Down] to change the digital

zoom. Press [OK] again to stop recording.

. The Video Menu Settings: in the standby mode, press the [M]

button, then use [Up] & [Down] in menu to select a given feature and

press [OK] to confirm & save your settings.

Here you can set the following video features:

Resolution: optional: 1080HFD / 7 0P / WVGA / VGA.

Loop recording: Choose between mins / 3mins / 5mins

Select OFF to stop the loop recording function.

WDR: Automatically on, no need to set.

Exposure Compensation:

+ .0 +5/3 +4/3 +1.0 + /3 +1/3 +0.0 -1/3

- /3 -1.0 -4/3 -5/3 - .0.

Motion Detection: the DVR needs to be connected with a car

charger when running this mode. When this mode is on, the device

starts recording automatically when there is an object movement. It

automatically stops recording after the object cease to move for 10

seconds.

Video Audio: on – both audio and video recording; off - only

video is recorded (without sound). Long press [M] to switch video

audio mode while recording.

Date Mark: ON or OFF the date mark.

G-Sensor: Choose between High / Mid / Low. In case of a

violent collision of the car the device can start the collision sensing

function. The video file from the accident will be automatically locked

(it won't be covered or deleted). During a Low mode this function is

off.

Taking photos

1. During a video mode press [M] to switch the device into a photo

mode. Press [REC] button to take photos. Press [Up] & [Down] to

change the digital zoom.

. Photo menu settings: Under photo mode, press [M], then use

[Up] & [Down] to move the selection, and press [REC] to confirm &

save your settings. Here you can set the following photo features:

Photo taking modes: single shot (default) / timer seconds /5

seconds /10 seconds.

Resolution: 1 M / 10M / 8M / 5M / 3M / M HD / VGA / 1.3M .

Image Quality: Good / Standard / Economy.

Sharpness: strong / standard / soft.

White balance: automatic / day / cloudy / tungsten lamp and

fluorescent lamp.

Color: Normal / Black and White / Sepia

ISO: automatic / 100 / 00 / 400.

Exposure compensation:+ .0 +5/3 +4/3 +1.0 + /3 +1/3 +0.0

-1/3 - /3 -1.0 -4/3 -5/3 - .0.

Anti-shake: on or off.

Date label: three optional choices: display date / display date and

time / off.

Playback Mode:

1. During recording mode: press [M] twice to enter the playback

mode. Press [Up] & [Down] to browse files.

. Browsing images:

1) Press [Up] & [Down] to browse files.

) Deleting browsed files: press [M] key to show the menu, then

press [Up] and [Down] to choose "Delete" and press the [OK] key to

show the confirmation dialog box. Select "delete" again (or "delete

all") and press [OK] to confirm the operation.

3) Protecting browsed files: press [M] to show the menu, then

press [Up] and [Down] to choose the protection function and press

[OK] button. A dialog box will pop up in which you can choose to lock

or unlock the current file or all files. Press [OK] to confirm the

operation.

4) Slide show: when browsing files, press [M] key to show the

menu, then press [Up] and [Down] to select "slide show" and press

[OK] key. A dialog box will pop up in which you can press [Up] and

[Down] to select the slide duration. Then press [OK] key to confirm

the operation. After opening a slide show set the slide duration and

the photos will be displayed automatically.

Note: to delete the locked files you must unlock them first. Unlocking

method is the same as the locking one.

3. Video playback:

1) Select the video file and press [OK] to play it. Press [OK] to

pause the playback. When playing a video, press [Up] and [Down] to

rewind and fast-forward the playback.

) Stop the playback and press [M] button to show the options

menu, where you can remove or protect the file as well as start slide

show.

System settings

Turn the device on and press the OK button to stop recording.

Then short press the M button once (long press to change the mode).

press the OK to open that option.

Options

Selection

Options

Option Desc iption

Set

Date/Time

Adjust fields:

Day/Month/Year

and

Hour/Minute/Secon

Use this option to set the date

and time of the device. Should

the device is not used for a long

time and the battery runs

completely flat, then the

date/time needs to be set

again.

Auto Powe

off

OFF / 1 minute / 1

minutes / 3 minutes

Use it to adjust the time to

automatically power off

Language English / French /

Spanish /

Portuguese /

German / Italian /

Polish / Chech /

Slovak / Russian /

Romanian /

Hungarian /

Estonian

Choose a menu language.

TV Mode Select [NTSC/PAL] For older television sets

or monitors which cannot

auto select the television

display

system or colour

information, select

“PAL”

Light

F equency

Select

[50HZ/60HZ]

For older television sets or

monitors which cannot auto

select the refresh rate

frequency, select 50Hz

Sc een

Select [Off/3 Mins/5

Use it to adjust an

Save Mins/10 Mins automatic screen saver

activation time.

Image

Rotation

Select [Off / On] Use this feature to flip the screen

180° depending on

your mounting

requirements

Fo mat

Format SD Card

[OK/Cancel]

Select “OK” to format the Micro

SD card.

Warning: formatting the card will

erase all the data stored on it.

Default

Settings

Select [OK/Cancel] Select OK to return the

device settings back to the

original factory settings.

Fi mwa e Ve sion View the current car DVR

software version.

Othe Optional Functions

HDMI Output:

Use a special HD output cable to connect the car DVR to the display

with HDMI input interface.

The two connection ways above allow you to display the images

and videos (also with sound) captured by your car DVR.

Note: This machine support dual-channel output. Please use

tri-colour AV output cable. The HDMI display could be used only after

1080P option selection.

GPS T acking Function:

1. Make sure that the machine you bought has a GPS vehicle

Tabla de contenidos

Otros manuales de Cámara de salpicadero de Overmax

Overmax

Overmax OV-CAM-02 Manual de usuario

Overmax

Overmax CamRoad 4.1 Manual de usuario

Overmax

Overmax Camspot 4.9 Pro Manual de usuario

Overmax

Overmax CamRoad 4.5 Manual de usuario

Overmax

Overmax CamRoad 2.2 Manual de usuario

Overmax

Overmax OV-CAM-03 Manual de usuario

Overmax

Overmax Camroad Mirror Manual de usuario

Overmax

Overmax Motocom 3.0 Manual de usuario

Overmax

Overmax camroad 4.6 Manual de usuario

Overmax

Overmax CamRoad2.3 Manual de usuario

Manuales populares de Cámara de salpicadero de otras marcas

Cansonic

Cansonic UltraDuo Z2 Manual de usuario

Gazer

Gazer F720 Manual de usuario

HP f500g Manual de usuario

Xblitz

Xblitz TANGO 4K Manual de usuario

Rexing

Rexing M1 Manual de usuario

Maka Technologies

Maka Technologies Marbella MXPro Manual de usuario

NESA

NESA NRC-80DLM Instrucciones de instalación y funcionamiento

Kaiser Baas

Kaiser Baas R20 Manual de usuario

Boyo

Boyo VTM43TC Manual de usuario

Minolta

Minolta MNCD37 Manual de usuario

Thinkware

Thinkware FA10 Manual de usuario

Momento

Momento MD-5200 Manual de usuario

BlackVue

BlackVue DR590X-1CH Manual de usuario

HP F300 Manual de usuario

CammSys

CammSys BlackSys BH-300 Manual de usuario

Snooper

Snooper DVR-2HD Manual de usuario

Lukas

Lukas Q900 Manual de usuario

RVS

RVS 450C Manual de usuario