oticon HIT PRO Manual de usuario
BTE
INSTRUCTIONS FOR USE
HIT PRO/HIT
Thank you
Thank you for choosing our product as your means to better hearing.
To support your efforts, we have put great care and attention into making sure that
your new hearing instruments are of the highest quality and that they are easy to
use and maintain.
We recommend that you read this manual carefully to achieve the maximum benefit
of your new hearing instruments.
Congratulations on your decision to actively improve your hearing with the most
advanced hearing technology in the market.
Contents
Instrument View BTE – 312 5a
Instrument View BTE – 13 5b
Instrument View BTE – Power 5c
Instrument View BTE with Corda
d
Changing batteries 7
Turning your instrument ON and OFF 9
Left/Right ear marking 10
Putting on your instrument with earmold 11
Putting on your hearing instruments with a Corda
(thin tube) 12
Push-button 13
Programs (Optional) 15
Volume Control (Optional) 17
Stand-by (Optional) 18
Tamper-resistant battery door (Optional) BTE 312 21a
Tamper-resistant battery door (Optional) BTE 13 and BTE Power 21b
Telecoil (Optional) 23
Auto Phone (Optional) 24
DAI (Direct Audio Input) 26
5a
IMPORTANT NOTICE
Please familiarize yourself with the entire contents of this booklet before using your
hearing instruments. It contains instructions and important information about the use
and handling of your hearing instruments and batteries.
Instrument View BTE – 312
Battery size: 312
FM 28
Caring for your hearing instrument 30
How to change Corda
(thin tube) 35
Cleaning your hearing instrument with Corda
(thin tube) 36
Daily maintenance with Corda
(thin tube) Domes 37
Changing the CordaDome 38
Avoiding heat, humidity and chemicals 40
Seven easy steps to better hearing 41
Common problems and their solutions 46
Warnings Yellow Pages
Microphone
openings
Push-button/
Volume Control
(Optional) Earmold
Battery door
Sound hook Plastic tube
Sound outlet
Ventilation
opening
5b
Instrument view BTE – 13
Battery size: 13
Microphone
openings
Push-button/
Volume Control
(Optional) Earmold
Battery door
Sound hook Plastic tube
Sound outlet
Ventilation
opening
5c
Instrument view BTE – Power
Battery size: 13
Microphone
openings
Push-button/
Volume Control
(Optional) Earmold
Battery door
Sound hook Plastic tube
Sound outlet
Ventilation
opening
5d
Instrument View BTE with Corda
Not available for BTE Power
Thin tube
Dome
Ear grip
Microphone
openings
Battery door
Your ear piece:
Custom Mold
Plus dome
Open dome:
Small
Medium
Large
Battery size 312 Battery size 13
Push-button/
Volume Control
(Optional)
7
Changing batteries
The correct battery size appears in the “Instrument View”
in the first section of this document.
A worn out battery should be removed immediately
and disposed of according to local regulations.
When the battery power is low, you will hear beeps.
This pre-warning starts when the battery has only a
few hours of operation left. The pre-warning will be
repeated in moderate intervals to indicate it is time to
change the battery.
If the battery runs out, the instrument turns off. When
that happens, beeps are played to indicate that the
instrument is no longer operating.
This is not an indication of a malfunction.
8 9
To replace the battery, follow these instructions:
Open the battery door completely by pushing the raised edge on the bottom of the•
instrument. To assist with the handling of the batteries, the magnet at the end of the
MultiTool can be used to help you.
Remove the sticky label from the + side of the new battery.•
The new battery may be inserted by using the magnetic end of the MultiTool. Ensure•
that the positive (+) marking faces the positive (+) sign printed on the battery door.
Close the battery door.
If any moisture is on the battery surface, it should be
wiped off before use. When you change the battery,
it will take a few seconds before the battery works
to full capacity. MultiTool
Turning your instrument ON and OFF
Turn ON your hearing instrument by closing the battery door completely with the battery
in place. When the battery door is closed the instrument will start up by playing a jingle.
This indicates that the battery is working and the instrument is operating.
Turn OFF your hearing instrument by opening the battery door slightly until a “click” is felt.
To preserve the battery, make sure your hearing instrument is switched off when you are
not wearing it.
IMPORTANT NOTICE
Open the battery compartment
fully to allow air to circulate
whenever you are not using your
hearing instrument, especially
at night!
ON
Click
OFF
Click
10 11
Left/Right ear marking
Hearing instruments are fitted to the uniqueness of each ear, which means if you have
two instruments then your left hearing instrument is programmed differently from your
right. That is why it is important to distinguish between the left hearing instrument and
the right.
In order to easily identify whether it is the left ear or right ear instrument, color markings
may be applied inside the battery door.
A blue dot marks the LEFT instrument.
A red dot marks the RIGHT instrument.
Putting on your instrument with earmold
Place the tip of the earmold in your ear canal, twisting
slightly, making sure that the top part of the earmold (A)
is pushed behind and under the fold (B) of your ear.
Gently pull up your ear and press the earmold in the
direction of the ear canal.
With the earmold positioned correctly in your ear, place
the hearing instrument behind your ear by lifting its
lower part and sliding it over the top of your ear.
A
B
12 13
Push-button
Your hearing instrument has a push-button to adjust volume and to switch between
different programs.
The push-button can be activated by pressing either the upper part (UP)
or the lower part (DOWN).
UP
DOWN
Putting on your hearing instruments
with a Corda
(thin tube)
Not available for BTE Power
Putting on your hearing instrument with a thin tube correctly every
time takes practice:
Place the hearing instrument behind your ear.1.
Hold the bend of the tube between your thumb and index finger.2.
The dome should point towards the ear canal opening.
Gently push the dome into your ear canal until the sound tube
sits close against the side of your head.
Position the ear grip in the concha using your index finger. Look3.
in a mirror. If the sound tube is sticking out from your ear, the
dome has not been placed correctly in the ear canal. If the ear
grip is visibly sticking out from your ear it has not been posi-
tioned correctly. To remove the instrument pull the bend of the
tube.
Dome
Concha
1
2
3
Otros manuales para HIT PRO
1
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Audífono de oticon
oticon
oticon Intiga i Manual de usuario
oticon
oticon miniRITE Nera2 Manual de usuario
oticon
oticon miniRITE Alta2 Manual de usuario
oticon
oticon Vigo Pro Manual de usuario
oticon
oticon Alta2 Pro Ti Manual de usuario
oticon
oticon CROS miniRITE T Manual de usuario
oticon
oticon minirite Manual de usuario
oticon
oticon Opn Series Manual de usuario
oticon
oticon miniBTE Alta Manual de usuario
oticon
oticon STREAMER PRO Manual de usuario
oticon
oticon Alta2 Pro Ti Manual de usuario
oticon
oticon Neuro One Manual de usuario
oticon
oticon Opn S Series Manual de usuario
oticon
oticon Intiga Rite Manual de usuario
oticon
oticon OPN Manual de usuario
oticon
oticon miniRITE Alta2 Manual de usuario
oticon
oticon Amigo R5 bodyworn with Advanced Bionics... Manual de usuario
oticon
oticon Agil Manual de usuario
oticon
oticon miniRITE Alta2 Manual de usuario
oticon
oticon Aurora miniRITE 312 T Rc Manual de usuario
Manuales populares de Audífono de otras marcas
Advanced Bionics
Advanced Bionics Slim HP Standard Manual de usuario
Widex
Widex DREAM440 THE DREAM SERIES Manual de usuario
Phonak
Phonak myPilot Manual de usuario
NIKEN
NIKEN NK-401 Manual de usuario
ON Semiconductor
ON Semiconductor Ezairo 7111 Pre Suite Manual de usuario
Sonetik
Sonetik GOHEAR Manual de usuario