Osram e:cue SYMPL pro Node Guía del usuario
Our Brand
www.osram.com/ecue
Light is OSRAM
AM255360031
AM305660031
AM305670031
AM305680031
AM305690031
e:cue SYMPL pro Node (e:pix)
e:cue SYMPL essential Node
Setup Manual / Installationsanleitung
02
AM255360031, AM305660031, AM305670031, AM305680031,
AM305690031
e:cue SYMPL pro Node (e:pix), e:cue SYMPL essential Node Setup Manual
(original issue)
e:cue SYMPL pro Node (e:pix), e:cue SYMPL essential Node
Installationsanleitung (Originalversion)
Edition / Ausgabe:
28.01.20 [EN_DE_SYMPL_proEssentialEpix_Node_Setup_v1p7]
Published by / Herausgegeben von:
OSRAM GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2019 OSRAM GmbH, BU Digital
All rights reserved / Alle Rechte vorbehalten
03
Read the Setup Manual and
the Safety instructions carefully.
Subject to modication without
prior notice. Typographical and
other errors do not justify any
claim for damages. All
dimensions should be veried
using an actual part.
Modication of the product is
prohibited.
This manual is designed for
electricians, system
administrators, and product
users.
All product names mentioned
in this manual are trademarks
of their respective owners.
Except for internal use,
relinquishment of the
instructions to a third party,
duplication in any type or form
- also extracts - as well as
exploitation and / or
communication of the contents
is not permitted.
Lesen Sie die
Installationsanleitung und das
Heft "Sicherheitshinweise"
sorgfältig durch. Alle Änderungen
vorbehalten. Rechtschreibfehler
oder andere Fehler rechtfertigen
keinen Anspruch bei Schäden.
Alle Maße sollten an einem realen
Gerät überprüft werden.
Modikation des Produktes ist
verboten.
Diese Anleitung richtet sich an
Installateure, IT-Administratoren
und Benutzer des Produktes.
Alle in dieser Anleitung
genannten Bezeichnungen von
Erzeugnissen sind Marken der
jeweiligen Hersteller.
Außer für interne Verwendung ist
die Überlassung dieser Anleitung
an Dritte, die gesamte oder
auszugsweise Veröffentlichung,
Verwertung oder Mitteilung in
jeglicher Art und Form nicht
gestattet.
04
Table of Contents / Inhalt
Table of Contents / Inhalt
English 07
1 Security instructions 08
1.1 Symbols 08
1.2 General security instructions 08
2 General device description 09
2.1 Delivery content 10
2.2 Connectors and Interfaces 11
2.3 User interface: LEDs 12
2.4 Identify button: Identication & Reset 13
3 General remarks 14
3.1 Transport 14
3.2 Unpacking 14
3.3 Warranty regulations 14
3.4 Maintenance and Repair 14
3.5 Disposal 15
3.6 Support 15
4 Installation 15
4.1 Installation conditions 16
4.2 Mounting process 16
4.3 Ethernet connection 16
4.4 DMX connection 17
4.5 Power supply 17
4.6 Protective Earth 18
5 Network configuration 19
5.1 Default network properties 19
5.2 Network conguration with SYMPHOLIGHT 19
5.3 Network conguration with the web interface 20
5.4 Extended DMX/RDM settings 22
05
Table of Contents / Inhalt
7 Firmware Update 26
8 Dismounting 26
9 Product specifications 27
10 Certifications 29
Deutsch 30
11 Sicherheitshinweise 31
11.1 Symbole 31
11.2 Sicherheitshinweise 31
12 Gerätebeschreibung 32
12.1 Lieferumfang 33
12.2 Anschlüsse und Schnittstellen 34
12.3 Benutzeroberäche: LEDs 35
12.4 Identify-Taster: Identizierung & Reset 36
13 Allgemeine Hinweise 37
13.1 Transport 37
13.2 Entpacken 37
13.3 Garantiebestimmungen 37
13.4 Wartung und Reparatur 38
13.5 Entsorgung 38
13.6 Technischer Support 39
14 Installation 39
14.1 Installationsbedingungen 39
14.2 Montage 40
14.3 Ethernet-Verbindung 40
14.4 DMX-Verbindung 41
14.5 Spannungsversorgung 41
14.6 Erdung 42
15 Netzwerk-Konfiguration 43
15.1 Standardeinstellungen vom Netzwerk 43
15.2 Netzwerkeinstellung über SYMPHOLIGHT 43
07
English
08
Security instructions
1 Security instructions
Please read the safety instructions, provided in a separate manual, carefully.
Make sure that the environmental, mounting, and installation prerequisites
are met. This manual should be kept at a safe place and in reach of the
device.
1.1 Symbols
!
The exclamation mark warns about possible damage of the
device itself or connected devices.
i
The information symbol gives general hints and informs
about handling and procedures for use of the device.
1.2 General security instructions
!
Connect cables and data only when the device is powered
down.
!
Ground the Ethernet and DMX connection cables for outdoor
installations (optional for indoor only). Connect the
SYMPL pro Node to Protective Earth when at least one
connected cable runs outdoor.
!
The device must be supplied by a separate certied SELV
Class 2 power supply.
i
If security instructions are missing, please contact the
OSRAM support service to receive a new copy.
09
General device description
2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX/RDM, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The SYMPL pro Node (e:pix) / SYMPL essential Node is the dedicated
output device for a high amount of controllable channels. It comes with 8 x
DMX/RDM*) universes or 8 x e:pix/RDM*) universes over screw terminal
plugs.
The SYMPL pro Node (e:pix) / SYMPL essential Node is especially
designed for the control of medium to large size DMX/RDM*) installations.
Within SYMPHOLIGHT the SYMPL pro Node / SYMPL essential Node
makes it possible to run up to 4096 DMX/ RDM channels (= 1365 RGB
pixels) over Ethernet, with bidirectional communication and all benets from
RDM. The e:pix version runs up to 16,348 DMX/ RDM channels
(= 5461 RGB pixels).
With an extended operating temperature of -40 ... 70°C (max 1 hour/day;
continuous operation at max. 60 °C) the SYMPL pro Node (e:pix) /
SYMPL essential Node is suited for projects in tough outdoor environments.
In addition to embedded temperature and humidity sensors*) whose data is
readable in SYMPHOLIGHT, a backup on data loss and test modes add to
the features of the SYMPL Node.
The SYMPL Node is powered by an external power supply or via Power-
over-Ethernet. It is easily mounted on standard 35 mm DIN rails, or with a
key hole in the housing base on walls or on any stable vertical surface.
*) RDM, e:pix and the sensors are not available in all product versions:
10
General device description
DMX RDM e:pix sensors
SYMPL pro Node x x - x
SYMPL pro Node e:pix x x x x
SYMPL essential Node x - - -
Please refer to your product version for the applicable features throughout
this manual.
2.1 Delivery content
Delivery content of the e:cue SYMPL pro Node (e:pix)/
SYMPL essential Node -
Product number AM255360031, AM305660031, AM305670031,
AM305680031, AM305690031
1. SYMPL pro Node (e:pix) / SYMPL essential Node
2. Safety instructions
3. Installation guide (English only)
i
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
higher is mandatory. Earlier versions do not support the
SYMPL Nodes. SYMPL Nodes are not supported by the
e:cue Lighting Application Suite.
i
e:cue SYMPL Noes are not hot-pluggable.
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Idiomas:
Otros manuales de Controladores de Osram
Osram
Osram EASY Manual de usuario
Osram
Osram OT EASY 60 II Manual de usuario
Osram
Osram Butler XT2 Guía del usuario
Osram
Osram DALIeco BT RTC Manual de usuario
Osram
Osram DALIeco Manual del propietario
Osram
Osram LMS134R2 Manual de usuario
Osram
Osram OPTOTRONIC OT40W/25W Programmable Series Manual
Osram
Osram e:cue Butler XT Guía del usuario
Osram
Osram SLC Manual de usuario
Osram
Osram BATTERYstart 700 PRO Manual de usuario
Osram
Osram DALIeco Manual de usuario
Osram
Osram DALI MCU Manual de usuario
Osram
Osram DALI PRO 2 IoT Manual de usuario
Osram
Osram DALI ACU BT Manual de usuario
Osram
Osram ENCELIUM EN-WS-SC3D-GB2-WT Manual de usuario
Osram
Osram Regiolux CUA 2 Series Manual de usuario
Osram
Osram DALIeco Manual del propietario
Osram
Osram e:cue SYMPL pixel Node Hoja de especificaciones
Osram
Osram DALI PRO CONT-4 RTC Instrucciones de montaje
