Origin Acoustics COMPOSER C60 Series Manual de usuario
C69 | C67 | C65 | C63
C67 C65 C63C69
C60 SERIES
COMPOSER COLLECTION • INSTALLATION MANUAL
C SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
Table of Contents
1.Introduction 1
2. Specications 2
3. What’s Included 3
4. Required Tools 3
5. Wire Recommendation 3
6. Speaker Placement 4
7. About Speaker Wire 6
8. Cutting the Hole 8
9.ConnectingtheWire 8
10. Installing the Speaker 9
11. Testing & Adjustments 10
12. Installing the Grille 10
13. Painting the Grille 11
14. Troubleshooting 12
15. Technical Assistance 13
16. Warranty 14
17. Return Process 15
C SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
1
1. Introduction
Thank you for purchasing the Composer Collection™. At Origin Acoustics, we take
pride in providing you with a high quality product. All of Origin Acoustics’ speakers
are designed to have excellent sound quality, longevity, and a simple installation
process.
This instruction booklet covers the necessary information for a smooth installation,
including: the tools you will need, step-by-step instructions for installation,
troubleshooting tips for any errors that may occur, and all warranty information.
If for any reason you experience problems or if you have installation questions
please call us at (844) 674-4461. Hours of operation are 8:00am to 5:00pm (Pacic
Time), Monday through Friday.
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
3
2
2. Specifications
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.
MODEL C69 C67
PART SWML12900 SWM12600
Woofer 4 x 8” Kevlar® 4 x 8” Fiber Glass
Tweeter 1” Silk DPSD™
Pivoting
1” Silk DPSD™
Pivoting
Frequency Response 40Hz-20kHz 43Hz-20kHz
Power RMS 50 Watts 50 Watts
Power Peak 125 Watts 125 Watts
Impedance 8ohm 8ohm
MODEL ALL C60 SERIES
Cutout Dimensions 4 x 11”(118 x 278mm)
Speaker Dimensions 5 x 11 ” (140 x 300mm)
Grille Dimensions 5 x 12 ” (149 x 311mm)
Mounting Depth 3 ” (95mm)
MODEL C65 C63
PART SWM12500 SWM12200
Woofer 4 x 8” IMG 4 x 8” Poly
Tweeter 1” Silk DPSD™
Pivoting
1” Aluminum
Pivoting
Frequency Response 45Hz-20kHz 45Hz-20kHz
Power RMS 50 Watts 50 Watts
Power Peak 125 Watts 125 Watts
Impedance 8ohm 8ohm
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
3
2
• Drywall Saw
• Speaker Wire
• Pencil
• WireStripper
• Measuring Tape
• Drill
• Drill Bit ⅛” (3mm)
• Stiff Wire
• Stud Finder
• Fish Tape
• Spray Paint
• Compressed Air
4. Required Tools
3. What’s Included
Speaker
Grille Template
Origin Acoustics
®
12 7/32 in
310 mm
5 15/16 in
150 mm
11 13/16 in
300 mm
5 1/2 in
140 mm
3 3/4 in
95 mm
4 5/8 in
118mm
11 in
278mm
Cut-Out Dimension
Mounting Depth
Grille DimensionOuter Dimension
Speaker
The gauge of wire used can have an impact on the performance of your speakers.
Use a multi-stranded wiring designed for amplier to speaker connections. Which
gauge to select depends on the length of wire to be used on any particular speaker.
The longer your run is, the larger your wire size must be.
5. Wire Recommendation
WireLength Wire Gauge
0 -100’ (0 - 30m) 16
50 - 150’ (15 - 45m) 14
Over 100’ (30m) 12
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
5
4
Listening Area
TV
CCFL FR
Place the center channel (CC) speaker
directly above or below the video
display, preferably equidistant from the
walls on the le and right. The le (L)
and right (R) speakers should be on the
same wall on either side of the video
display, with the center speaker exactly
between them. It’s better if the le and
right speakers are closer to the screen
rather than further from it. It’s best if all
three front speakers about 3.5 feet (1 m)
from the oor, however there’s a good
chance that the center speaker will have
to be lower or higher than the others. The
speakers can be installed either vertically
or horizontally. For better sound quality,
avoid installing the speakers near corners.
6a. Speaker Placement (3 Speakers)
TVL R
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
5
4
Listening Area
TV
CCFL FR
R
RRLR
L
In addition to the le, right, and
center speakers described in the 3
speaker setup, install the surround
le and right speakers on the le and
right walls. They should be a few feet
behind the listening area, and about 5
feet (1.5 m) from the oor.
6b. Speaker Placement (5 Speakers)
The front le, right, and center
speakers should be in the same
location as the previous two setups
described. The surround le and right
speakers should be about 5 feet (1.5
m) from the oor, directly to either
side of the listening area. Finally, the
rear speakers should be on the back
wall, about 5 feet (1.5 m) from the oor and 3 to 6 feet (1 to 2 m) apart. If possible,
make sure that the distance between the rear speakers is the same as the distance
between the front le and right speakers.
6c. Speaker Placement (7 Speakers)
Listening Area
TV
CCFL FR
RL
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
7
6
Strip ¼ to ½ inches (6 to 12 mm) of the
insulation o both ends of the wire. To
avoid stray strands, twist them at the
end. Connect the wire to the amplier,
and make sure the wire connected to
the le speaker output will be routed
to the le speaker, right output to right
speaker, etc.
7b. Installing the Wire
You will need a wire that has at least two conductors; one that can be identied
as the positive and the other as the negative. All two conductor wires have some
means of identifying which conductor is which, but at times this identication
may be subtle. It’s crucial that you keep track of which wire you use for positive
(+) and negative (-). Typically if the wires are colored red and black, the red wire
is used for positive and the black wire is used for negative, but sometimes other
colors or patterns are used. You can choose whichever color of wire you want to
be positive and negative as long as you remain consistent throughout the install.
On both your amplier and your speaker the connectors will be identied as red
for positive and black for negative. It is very important to look carefully at the
speaker wires and be certain that the same wire that is attached to the positive
connector in the amplier is attached to the positive connector in the speaker.
7a. About Speaker Wire
0.25 - 0.5”
(6 - 12mm)
Speaker
Wire
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
7
6
Plan how you’ll route the wire to the desired speaker location. There are several
methods for routing the wire, and you may need to combine several of them.
7c. Wire Routing
One option is to li up the carpet and
rout “tape wire” under the carpet.
Under the Carpet
The wire can be routed behind the
baseboard by cutting a groove out
of the back of the baseboard, or by
buying special baseboard designed for
concealing wires.
Behind the Baseboard
When available, you can route the wire
through an attic or crawlspace.
Attic or Basement
When running wires through a wall, be
sure to avoid all obstacles such as AC
wiring, pipes, and ducts.
Through Walls
If these speakers are being installed in a new home during construction, the
installation process will be a bit dierent (although much simpler). For these
situations, it’s recommended you purchase a bracket. Instructions on how
to install the speakers are provided with the bracket, or can be found on our
website. Visit www.originacoustics.com for more information.
For New Construction
C60 SERIES • COMPOSER COLLECTION INSTALLATION MANUALC60 SERIES • COMPOSER COLLECTION INSTALLATION MANUAL
9
8
When you’ve decided on the locations for all of the speakers, use the template
to trace a circle lightly in pencil where the hole should be. (If you don’t have a
template, check the Specications section for cutout sizes.) If you’re unsure
on whether there may be obstacles (such as pipes or wires) where you plan on
installing the speaker, drill a ⅛ inch hole in the center of the rectangle, then put
a bent coat hanger through the hole to feel around. Use a keyhole or drywall saw
to cut the hole.
8. Cutting the Hole
Insert the wires into the connectors. Push down on each connector, and insert
each wire into the opening with the correct polarity. Make sure that the positive
wire is attached to the red connection and the negative wire is being attached
to the black connection. If the wires are switched, speaker performance will be
drastically impacted.
9. Connecting the Wire
Speaker
Wire
TerminalConnectors
Este manual sirve para los siguientes modelos
8
Tabla de contenidos
Otros manuales de Oradores de Origin Acoustics
Origin Acoustics
Origin Acoustics Acoustic Landscape Seasons Outdoor AS41SYS Manual de usuario
Origin Acoustics
Origin Acoustics DSUB6 Manual de usuario
Origin Acoustics
Origin Acoustics D60 Manual de usuario
Origin Acoustics
Origin Acoustics Director D62 DT/SUR Manual de usuario
Origin Acoustics
Origin Acoustics D80 Manual de usuario
Origin Acoustics
Origin Acoustics Director 5 Series Manual de usuario
Origin Acoustics
Origin Acoustics EXPLORER THINFIT COLLECTION TF37EX Manual de usuario
Origin Acoustics
Origin Acoustics Crown CDi CDi1000 Manual de usuario
Origin Acoustics
Origin Acoustics PROFESSIONAL PCSUB8 Manual de usuario
Origin Acoustics
Origin Acoustics DIRECTOR D69 Manual de usuario
Origin Acoustics
Origin Acoustics Director 100 Series Manual de usuario
Origin Acoustics
Origin Acoustics OS67 Manual de usuario
Origin Acoustics
Origin Acoustics PROFESSIONAL PP50 PROFESSIONAL PP60 Manual de usuario
Origin Acoustics
Origin Acoustics PROFESSIONAL PC50 Manual de usuario
Origin Acoustics
Origin Acoustics D65EX Manual de usuario
Origin Acoustics
Origin Acoustics P80 Manual de usuario
Origin Acoustics
Origin Acoustics Director D100 Series Manual de usuario
Origin Acoustics
Origin Acoustics thinfit tf34 Manual de usuario
Origin Acoustics
Origin Acoustics D39 Manual de usuario
Origin Acoustics
Origin Acoustics Composer LCR LCR36 Manual de usuario
