Oregon Scientific AW129 Manual de usuario

BBQ THERMOMETER

MODELNO.:AW129/AWR129

Instruction Manual

DESCRIPTION OF PARTS

A. POWER BUTTON

Turns the unit on/off. Press and hold for 2 seconds to activate

unit.

B. SELECT BUTTON

Selectsthetypeofmeat(BEEF,LAMB,VEAL,HAMBURGER,

PORK,TURKEY,CHICKENandFISH).

C. COOK BUTTON

Selects the doneness of certain types of meat

(RARE,MEDIUMRARE,MEDIUMandWELLDONE).

D. RECEPTION ICON

Signal, No signal

E. MEAT SELECTION

F. DONENESS SELECTION

G. TARGETTEMPERATURE

H. CURRENT TEMPERATURE

I. BATTERY LOW INDICATOR

Battery Low Indicator

Main Unit

Transmitter (Remote Unit)

Main Unit and

Transmitter (Remote Unit)

J,J1. BELT CLIP

Clips onto a belt for mobility or use it for table stand.

K. BATTERYCOMPARTMENT AND DOOR

Accommodates two AA-sized (UM-3) batteries (not included).

L. VOLUME SWITCH

Adjusts the volume for alert signals (high or low).

M. RESET BUTTON

Returns all settings to their original values and synchronizes

the transmitter and monitor.

N. C/F SWITCH

Selects Centigrade or Fahrenheit for temperature reading.

NOTE: High/low volume selector and °C/°F selector are lo-

cated inside battery compartment.

THE TRANSMITTER AND MEAT PROBE

(SEEILLUSTRATION)

O. LED

Flashes to indicate the unit is on and transmitting

P. POWER BUTTON

Turns the unit on/off.

Q. TRANSMITTER SOCKET

For connecting the meat probe.

R. SOCKET COVER

Protects the connector when not in use.

S. MEAT PROBE CONNECTOR

Plugs into transmitter socket.

T. MEAT PROBE

Measures meat temperature.

U. BATTERY COMPARTMENT AND DOOR

AccommodatestwoAAA-sized(UM-4)batteries(notincluded).

V. RESET BUTTON

Returns all settings to their original values and synchronizes

transmitter and monitor.

INSTALLING BATTERIES IN

TRANSMITTER

1. Open the battery compartment (U on diagram).

2. Insert two AAA batteries following the polarities as indicated

inside.

3. Replace cover.

4. Press reset button (V on diagram).

NOTE: Transmitter and main unit need to be reset within 60

seconds of each other to synchronize units and establish a signal.

INSTALLING BATTERIES IN MAIN UNIT

1. Open the battery compartment (K on diagram).

2. Insert two AA batteries following the polarities as indicated

inside.

3. Replace cover.

4. Press reset button (M on diagram).

NOTE: Main unit and transmitter need to be reset within 60

seconds of each other to synchronize units and establish a signal.

OPERATING YOUR BBQ THERMOMETER

1. Connect meat probe to transmitter by inserting S into Q (on

diagram).

2. Turn on the transmitter by pressing and holding the power

button (P on diagram) for two seconds. Light will flash (O on

diagram).

3. Turn on the main unit by pressing and holding the power

button (A on diagram) for two seconds.

4. Select the meat you are cooking by pressing the meat selector

(B on diagram) until your desired setting appears on the dis-

play:BEEF,LAMB,VEAL,HAMBURGER,PORK,TURKEY,

CHICKENandFISH.

5. Choose your preferred doneness level by pressing the cook

selector (C on diagram) until your desired setting appears on

thedisplay:RARE,MEDIUMRARE,MEDIUMandWELLDONE.

NOTE: Doneness level selection is available for BEEF, LAMB

andVEALonly.ForCHICKEN,PORK,TURKEY,FISHandHAM-

BURGER the unit defaults to well done.

6. Checktransmissionicon(Dondiagram).Itindicatesthatyou’ve

established signal connection by flashing.

NOTE: If you do not have an established signal connection,

check the following:

• Shorten the distance between transmitter and main unit.

(Maximum transmission range is 100 feet. Transmission

distances will vary depending on conditions and or

obstruions

• Check batteries and replace if necessary

• Check synchronization of transmitter and main unit by

pressing both reset buttons within 60 seconds of each other

to synchronize units and establish signal.

7. Once you’ve established a signal, place the transmitter at your

cooking area, away from direct heat or flame.

8. Insert the tip of the probe (T on diagram) into the center of the

meat.

NOTE: Do not rest probe wire on cooking surface.

9. Use the belt clip (J on diagram) to wear the main unit or readjust

the belt clip position for table stand (J1 on diagram).

Note: The belt clip should be removed from the main unit before

changing the clipping position.

10. Four beeps will sound when the current temperature is within

five degrees of the target temperature to indicate your meat is

almost ready.

11. Ready alarm (continuous beeping) will sound when the target

temperature is reached. To turn off the alarm, press any control

button on the main unit. Remove meat from the cooking sur-

face.

12. Remove the probe from the meat. Use caution when touching

probe or end of cable as they may be hot and can cause burns.

13. If current temperature surpasses the target temperature, an

overcook alarm will sound (Fast continuous beeping).

Remove meat immediately.

14. Turn off both units by pressing the power buttons (A and P on

diagram) for two seconds.

AUDIBLE ALARMS

Out of range

Three beeps; activates when transmitter and monitor are more than

100 feet apart. Shorten distance and/or check batteries.

Almost ready

Four beeps; activates when current temperature is within 5 degrees

of the target temperature.

Ready

Continuous beeping when target temperature is reached.

Overcooking

Fast continuous beeping when the meat is overcooked.

CLEANING

• Do not immerse the monitor or transmitter in water/liquid.

• Hand wash the probe with mild detergent and water. Do not

machine wash.

• Wipe main unit and transmitter with a damp cloth.

FCC WARNINGS

BBQ Thermometer has been tested to comply with FCC standards

forhomeorofficeuse.ThisdevicecomplieswithPart15oftheFCC

Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC :

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interferencetoradioor television reception, whichcanbedetermined

by turning the equipment off and on, the user is encouraged to try

tocorrecttheinterferencebyoneormoreofthefollowingmeasures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

■Consult the dealer of an experienced radio/TV technician for help.

CompanyName:Oregon Scientific, Inc.

Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA

Telephone Number: 503-639-8883

Website address: www.oregonscientific.com

CompanyName:IDTTechnology Limited

Address: Block C, 9/F., Kaiser Estate, Phase 1,

41 ManYue Street, Hunghom, Kowloon, Hong Kong.

Telephone Number: (852) 2764 7873

Websiteaddress:www.idthk.com

Nameandmodelnumberofthe product:

BBQThermometerAW129/AWR129

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its

operation, please contact our customer care department at 1-800-

853-8883 or via email at [email protected].

WARRANTY

This product is warranted to be free of manufacturing defects for a

period of 90 days from date of retail purchase. Defective product

should be directed to the place of retail purchase for exchange.

Should this not be possible, contact our customer care department

for assistance and a return material authorization. No returns may

be made without a return authorization.Warranty exchanges require

proof of date of purchase (purchase receipt showing date, place and

product purchased). This warranty does not cover product subjected

to abuse, misuse, accidental damage or tampering.

CAUTION

• Do not immerse transmitter or main unit in water/liquid.

• Keep transmitter and main unit away from heat and direct

flame.

• Do not expose main unit to rain or moisture.

• Probe will be hot after use. Use care in handling to avoid

burns.

• Do not rest probe wire on cooking surface.

Otros manuales para AW129

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Termómetro de Oregon Scientific

Oregon Scientific

Oregon Scientific RAR813 Manual de usuario

Oregon Scientific

Oregon Scientific THWR800 Manual de usuario

Oregon Scientific

Oregon Scientific AW131 Manual de usuario

Oregon Scientific

Oregon Scientific FT101 Manual de usuario

Oregon Scientific

Oregon Scientific THT312 Manual de usuario

Oregon Scientific

Oregon Scientific RMR686P Manual de usuario

Oregon Scientific

Oregon Scientific RMR382 Manual de usuario

Oregon Scientific

Oregon Scientific AW129 Manual de usuario

Oregon Scientific

Oregon Scientific RGR126 Manual de usuario

Oregon Scientific

Oregon Scientific RAR232 Manual de usuario

Oregon Scientific

Oregon Scientific RAR232 Manual de usuario

Oregon Scientific

Oregon Scientific RMR182 Manual de usuario

Oregon Scientific

Oregon Scientific RMR682A Manual de usuario

Oregon Scientific

Oregon Scientific EMR812HGN Manual de usuario

Oregon Scientific

Oregon Scientific RMR132 Manual de usuario

Oregon Scientific

Oregon Scientific EW92 Manual de usuario

Oregon Scientific

Oregon Scientific RMR683HG Manual de usuario

Oregon Scientific

Oregon Scientific RMR802 Manual de usuario

Oregon Scientific

Oregon Scientific MTR101 Manual de usuario

Oregon Scientific

Oregon Scientific SL101 Manual de usuario

Oregon Scientific

Oregon Scientific EMR201 Manual de usuario

Oregon Scientific

Oregon Scientific AW133 Manual de usuario

Oregon Scientific

Oregon Scientific JTR-168LR Manual de usuario

Oregon Scientific

Oregon Scientific RAR381 Manual de usuario

Manuales populares de Termómetro de otras marcas

Delton

Delton 981A Manual de usuario

Baker

Baker MM2P Manual de usuario

Tarmo

Tarmo 320281 Manual de usuario

Citizen

Citizen CTD 504 Manual de usuario

TFA

TFA 14.1500 Manual de usuario

Vive

Vive DMD1010 Manual de usuario

Gotemp

Gotemp THB4002 Manual de usuario

GREISINGER

GREISINGER G 1202 Manual de usuario

Amprobe

Amprobe TMD-53W Manual de usuario

Trotec

Trotec BP10 Manual de usuario

Radiance instruments

Radiance instruments RT616 Series Manual de usuario

Eurolec

Eurolec IR151 Manual de usuario

Scaneo

Scaneo TS42B Manual de usuario

Sper scientific

Sper scientific 800043 Manual de usuario

Microlife

Microlife NC 200 Manual de instrucciones

Motorola

Motorola MBP69SN Guía de configuración

The MeatStick

The MeatStick The MeatStick Manual de usuario

Hama

Hama TH35-A Manual de usuario