Oregon Scientific THGR968 Manual de usuario

CABLE FREE

THERMO-HYGRO SENSOR

MODEL:THGR968

USER’SMANUAL

INSTALLATION

The thermo-hygrometeris a self-contained unit and is powered by

a solar cell Solar Power Cell:

1. Unscrew the screws on the back cover of the solar power cell

STR-928 and remove the back cover.

2. Insert the thermo-hygrometer cable into the cable connection

in the solar power cell.

3. Insert two “AA” batteries (included) with the polarities in

the direction as shown inside the compartment.

4. Position the cable so the cable is placed into the cable recess

and the back cover can fit into place.

5. Press the [RESET] button.

6. Place the back on the unit and tighten the screws reattaching

the backcover to the solar power cell unit.

INTRODUCTION

Congratulations on your purchasing the THGR968 Remote-hygro

ThermoSensor.TheRemoteThermo-HygroSensorisusedwiththe

OSI Wireless Weather Station WMR112A to monitor temperature

and humidity changes of remote or outdoor sites . Operation is easy

and no wire installation is required.

‘AA’ Um3 1.5V

Thermo-Hygrometer:

Position and mount the remote sensor and its solar power

cell outdoors in a protective location from direct sun and

rain.

To see the readings from the thermo-hygro sensor you need to own

theMainUnitoftheWMR112Aset.The main unitdisplaysoutdoor

temperature and humidity readings from the thermo-hygro sensor.

PRECAUTIONS

This product is engineered to give you years of satisfactory service

if you handle it carefully. Here are a few precautions:

1. Do not immerse the unit in water.

2. Do not clean the unit with abrasive or corrosive materials. They

may scratch the plastic parts and corrode the electronic circuit.

3. Do not subject the unit to excessive force, shock, dust,

temperature or humidity, which may result in malfunction,

shorter electronic life span, damaged battery and distorted

parts.

4. Do not tamper with the unit’s internal components. Doing so

will invalidate the warranty on the unit and may cause

unnecessary damage. The unit contains no user-serviceable

parts.

5. Only use fresh batteries as specified in the user’s manual. Do

not mix new and old batteries as the old ones may leak.

6. Always read the user’s manual thoroughly before operating the

unit.

SPECIFICATIONS

TemperatureMeasurement

Proposed operating range : -20.0°C to +60.0°C

(-4.0°F to 140.0°F)

Temperature resolution : 0.1°C (0.2°F)

RF Transmission Frequency : 433 MHz

RF Transmission Range : (30 meters) 100 feet

Temperature sensing cycle : around 40 seconds

Power : solar cell (STR928)

Weight : 3.93 ounces (111.5 g)

Dimension : 4.47x1.67x4.23 inches

113.5(L)x42.5(W)x

107.5(H)mm

STR928:

Weight : 9.38 ounces(266 g)

Dimension : 115(L) x 81(W) x 138(H) mm

(4.53x3.19x5.43 inches)

Powerbackup : 2 x UM3- “AA” size alkaline

battery (recommend super

lithium battery for weather

condition under 0°C/32 ° F)

NOTE ON COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause

undesired operations.

Warning: Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user's authority to operate the equipment.

FCC:

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interferencetoradioortelevisionreception,whichcanbedetermined

by turning the equipment off and on, the user is encouraged to try

tocorrecttheinterferencebyoneormoreofthefollowingmeasures:

oReorient or relocate the receiving unit.

oIncrease the separation between the equipment.

oConnect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

oConsult the dealer of an experienced radio/TV technician for

help.

CAUTION

— The content of this manual is subject to change without

further notice.

— Due to printing limitation, the displays shown in this

manual may differ from the actual display.

— The contents of this manual may not be reproduced

without the permission of the manufacturer.

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its

operation, please contact our customer care department at

800-853-8883 or via email at [email protected].

WARRANTY

This product is warranted to be free of manufacturing defects for a

period of 90 days from date of retail purchase. Defective product

should be directed to the place of retail purchase for exchange.

Should this not be possible, contact our customer care department

for assistance and a return material authorization. No returns may

be made without a return authorization. Please retain your retail

receipt as you may be asked to provide a copy of it for proof of date

purchased.

This warranty does not cover product subjected to abuse, misuse,

accidental damage or tampering.

Otros manuales de Accesorios de Oregon Scientific

Oregon Scientific

Oregon Scientific Super Guard 58J Manual de usuario

Oregon Scientific

Oregon Scientific WS909 Manual de usuario

Oregon Scientific

Oregon Scientific EM221 Manual de usuario

Oregon Scientific

Oregon Scientific RTGN129 Manual de usuario

Oregon Scientific

Oregon Scientific BAR609HGA Manual de usuario

Oregon Scientific

Oregon Scientific WS903 Manual de usuario

Oregon Scientific

Oregon Scientific WTGR800 Manual de usuario

Oregon Scientific

Oregon Scientific THR238N Manual de usuario

Oregon Scientific

Oregon Scientific UVN800 Manual de usuario

Oregon Scientific

Oregon Scientific Wireless Outdoor Temperature and Humidity Sensor THGR 238... Manual de usuario

Oregon Scientific

Oregon Scientific THN122N Manual de usuario

Oregon Scientific

Oregon Scientific Weather+ Basic Guía de instalación

Oregon Scientific

Oregon Scientific THWR288A Manual de usuario

Oregon Scientific

Oregon Scientific HWI0005 Manual de usuario

Oregon Scientific

Oregon Scientific Chamfer Chisel 91P F&B A107038 Manual de usuario

Oregon Scientific

Oregon Scientific Super 20 Series Manual de usuario

Oregon Scientific

Oregon Scientific HWI0002 Manual de usuario

Oregon Scientific

Oregon Scientific THGR328NH Manual de usuario

Oregon Scientific

Oregon Scientific 91VX Manual de usuario

Oregon Scientific

Oregon Scientific THN132ES Manual de usuario

Oregon Scientific

Oregon Scientific THR28 Manual de usuario

Oregon Scientific

Oregon Scientific UVR128 Manual de usuario

Oregon Scientific

Oregon Scientific UVR138 Manual de usuario

Oregon Scientific

Oregon Scientific THR138 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario