Orava Miwa Dark Manual de usuario
Miwa Dark
Instruction manual
Microwave oven
EN
Miwa Dark
2EN
The intended use of the device
The device is designed exclusively for heating food and beverages, in
microwave, to the extent specified by the technical and operating parameters
and functions, safety and user instructions and external influences of the
operating environment.
ORAVA electrical appliances are manufactured according to current state of
the engineering and recognized safety-technical rules. Nevertheless, incorrect
or improper use, or use contrary to designation may result in the risk of injury
or endanger the life of the user or third person, damage to the device and
other material values.
1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS
• This document contains important safety instructions and warnings for safe,
correct and economical operation of the electrical equipment. Its compliance
helps the user avoid risks, increase reliability and product life.
• In this document, the general term product is used in text parts such as:
electrical equipment - any device used for the production, conversion,
transmission, distribution or use of electricity.
• From the point of view of the purpose of using electricity, the concept of
electrical equipment in the strict sense of the word will include the following
categories:
- household electric appliances,
- information and communication equipment,
- consumer electronics,
- lighting equipment,
- electrical and electronic tools,
- toys and equipment for sporting and recreational purposes,
- medical devices (aids),
- monitoring and control devices,
- vending devices.
1.1 General safety instructions
• Before operating the unit, we recommend that you carefully read the instruction
manual and operate the equipment in accordance with the instructions!
• The safety instructions and warnings in this manual do not cover all the
possible conditions and situations that may arise when using the device. The
user must understand that a factor that cannot be incorporated into any of the
products is personal responsibility and caution. These factors must therefore
be ensured by users serving this device.
• Failure to follow the safety instructions and warnings is forbidden by the
manufacturer for any damage to health or property!
• Keep the instruction manual as close to the device as possible throughout its
service life. Always keep the instruction manual together with the appliance for
future use and use by new users.
3EN
• Use the appliance only for the intended purpose and in the manner specified
by the manufacturer.
• The appliance is intended for home and similar indoor use without special
focus.
• This appliance is intended, in addition to domestic use, for the following uses:
- in shops, offices and other similar work environments;
- in economic buildings;
- in hotels, motels and other residential environments;
- in bed and breakfast establishments.
• It is not a professional device for commercial use.
• Do not change the technical parameters and features of the device by
unauthorized modification or modification of any part of the device.
• The manufacturer is not responsible for damages caused during
transportation, misuse, damage or destruction of the equipment due to
adverse weather conditions.
1.2 Safety of the operating environment
• Do not use the device in an industrial environment or outside environment!
• Do not expose the appliance to:
- sources of excessive heat or open flame,
- dripping or splashing water,
- vibration and excessive mechanical stress,
- insects, animals and plants,
- aggressive and chemical substances.
• The operating environment of the device must always be in accordance with
the basic characteristics set out.
• Features of the operating environment:
1. Ambient temperature: +5 ÷ +40 ° C
2. Humidity: 5 ÷ 85%
3. Altitude: ≤ 2 000 m
4. Occurrence of water: intermittent condensation of water or occurrence of water
vapor
5. Occurrence of foreign bodies: quantity and type of dust are insignificant
6. Protection degree: min. IP20 (device protected from touching dangerous parts
by hand and non-waterproof)
• This degree of protection is not indicated on the product and on the technical
parameters in the operating instructions.
• If the protection class of the product is different from IPX0, this information
is then displayed on the label of the appliance or in the technical data of the
operating instructions.
• Other characteristics of the domestic operating environment (mechanical
stress - vibrations and vibrations, occurrence of plant, animals, weather effects
...) are negligible in terms of effect on the correct and safe use of electrical
equipment.
4EN
1.3 Electrical safety
• Before connecting the appliance to the power supply for the first time, make
sure that the voltage on the appliance label corresponds to that of the
household electrical socket.
• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.
• The electrical safety of the appliance is guaranteed only if it is properly
connected to the mains.
• Electrical protection class I equipment is equipped with a protection against
electric shock by means of protective earthing of inanimate parts, which can
become dangerous when the device is malfunctioning. Always connect such
devices to properly installed mains sockets that are equipped with earthing
conductors and have a properly grounded earthing conductor.
All electrical equipment is equipped with a three-wire power supply.
• Class II electrical equipment is protected against electric shock by double
insulation or by enhanced insulation of hazardous live electrical parts. Device
of protection class II it must not be equipped with means to connect protective
earthing.
All electrical equipment is equipped with two-wire power supply.
• Class III electrical equipment is a device that is powered by a small safe
voltage source (battery or accumulator) and does not present any danger to
the user from electrical shock.
• In order to provide increased safety against the risk of electric shock due to
the use of electrical appliances by laypersons, it is recommended to install the
power supply circuit for sockets with a rated current not exceeding 20 A RCD
with a rated operating current not exceeding 30 mA.
To ensure the safety and correctness of the electrical installation, consult a
qualified electrician.
• Only use a power cord with a plug (mains lead) supplied with the device and
compatible with a wall socket. Using another cable may result in fire or electric
shock.
• Always connect an electrical appliance to an easily accessible mains socket. In
the event of an operating fault, the appliance must be switched off as soon as
possible and disconnected from mains supply.
• The power cord and mains plug must always be easily accessible for safe
disconnection of the electrical appliance from the power supply.
• Do not pull off the power cord by pulling the cable. Disconnect the power cord
by pulling the plug behind the power cord plug.
• If you use an extension cord, make sure that the total rated power of all
devices connected to the extension cord does not exceed the max. current
load on the extension cable.
5EN
• If you need to use an extension cord or power supply block, make sure that
the extension cord or power pack is plugged into a power socket, and not to
another extension cord or power supply. The extension power cord or power
supply block must be designed for grounded electrical plugs and connected to
a properly grounded electrical socket.
• The power plug of the appliance must be compatible with the mains socket.
Never use any adapters or modify the socket in any other way. Do not use
inappropriate or damaged sockets!
• To avoid electrical shock, plug the power cables into properly grounded
electrical sockets. If the device is equipped with a 3-pole plug, do not use
adapters that do not have a grounding element or remove the grounding
element from the plug or adapter.
• Do not bend, crush or otherwise expose the power cord of the appliance to
mechanical stress or external heat sources. Damage to the power cord may
result in electric shock.
• When the power cord is damaged, disconnect the appliance from the mains
and do not use it again.
• If the power cord is damaged, it must be replaced by the manufacturer, its
service department or a similarly qualified person to avoid the risk of electric
shock.
• Regularly check and maintain the electrical appliance as well as the power
cord and power socket. Disconnect the power plug regularly and clean it if
necessary. Pollution by dust or other substances may cause disruption of the
insulating state and consequently fire.
• Do not expose the appliance to water or moisture. The ingress of water into the
appliance increases the risk of electric shock.
If the power cord is wet or the water has penetrated the water, disconnect it
immediately from the mains. If the appliance is plugged into a mains socket
and if possible, turn off the power circuit before attempting
unplug the power. If you are pulling wet wires from a live power source, be very
careful.
• If the electrical equipment is installed (connecting) the protective covers are
dismantled, the electrical parts must not be accessible to the user when the
installation is finished.
6EN
1.4 Safety of persons
• This appliance is intended for use and operation by persons without
electrotechnical qualification - lay people, according to the instructions
specified by the manufacturer.
• Device operation includes activities such as switching on and off, user
manipulation and setting of operating parameters, visual or auditory inspection
of the equipment, and user cleaning and maintenance.
• This appliance can be used by children under the age of 8 and persons with
reduced physical, sensory or mental capabilities or lack of experience or
knowledge when supervised or instructed to use the appliance safely and
understand the dangers involved.
• Children may not play with the appliance.
• Cleaning and maintenance for users may not be performed by children
unattended.
• Always keep the appliance out of reach of children during use and operation.
Be sure to download the appliance even for a freely accessible power cord.
• Always be careful when operating the electric appliance! Do not use an electric
appliance if you are overly tired, under the influence of medication or narcotic
drugs that reduce attention and focus.
• Inattention during operation may result in serious injury.
7EN
1.5 Cleaning, maintenance and repairs
• Observe the normal user cleaning and maintenance of the appliance in
the recommended way. Do not use solvents or harsh cleaners for cleaning.
Pollution and visible stains from finger contact, respectively. The hands can
be cleaned using detergent detergents specially designed to clean household
appliances.
• If you do not use the appliance, clean it or disconnect the appliance from the
power supply when the appliance is faulty.
• Electrical appliances that are cleaned after use and are not intended to be
completely or partly immersed in water or other liquid, protect against the
effects of dripping and / or splashing water and before immersion.
• Electric household appliances, like all other technical devices, are subject to
the surrounding environment and natural wear. Since the legal framework of
regular maintenance is not laid down for lay-in electrical household appliances,
the manufacturer recommends that the user have the appliance checked and
cleaned at least once a year by a specialist workshop.
• By doing so, it is possible to achieve safety, operational reliability and
increased service life.
• Do not disassemble the electric appliance! The appliance works with a
dangerous voltage. For this reason, always switch off the appliance and
disconnect it from the mains supply during user maintenance. In the event of a
fault, please have the repair serviced by an authorized service center.
• Before calling a service:
1. Verify that you are unable to remedy the malfunction yourself according to
the procedure described in the chapter „Remedy of operating faults“.
2. Turn the appliance off and on to make sure the fault reappears.
3. If the malfunction of the appliance still persists after these operations, call
the nearest specialist service center.
• Never repair the electric appliance yourself!
• Unauthorized, unqualified and improper use of an electric appliance may result
in electric shock or other serious injury.
• Only carry out the warranty or post-warranty repair of an electrical appliance to
an authorized qualified person (*).
(*) Competent qualified expert: the sales department of the manufacturer or importer or the person
qualified and authorized to carry out this type of activity with the ability to avoid all risks.
8EN
2. Special Safety Instructions.
Read carefully!
• Electrical equipment is designed and manufactured in such a way as to allow
for safe operation and use by persons without a professional qualification.
Despite all the measures taken by the manufacturer to ensure safe use,
handling and use, it carries with it some residual risks and associated potential
hazards.
• To warn of possible hazards, the following symbols and their meanings have
been used on the device and in the accompanying documentation:
This symbol alerts users that the device is operating with dangerous
electrical voltage. Do not remove protective covers on the device.
Failure to observe the safety instructions during use and operation of
the device may result in:
Danger of electric shock!
This symbol alerts users to the following: Risk of serious injury or
life threatening when not following the safety instructions when using
and operating the unit!
Danger of damage to equipment or other damage to property!
This symbol alerts users to the following: Danger from invisible
radiation if you fail to follow the safety instructions when using and
operating the unit!
Transportation/Transfer
• When transporting and using, for example, of the transport cart, be careful
when moving, to avoid overturning the device.
• Transport / carry the equipment only after thorough inspection of the space
and the routes, which must be unobstructed.
• Never carry the device while it is in operation. Do not carry the device while it
is plugged into a wall socket.
Warning!
• When operating the device, the outside covers and surfaces may be heated.
Never transfer the appliance until it has cooled down to ambient temperature.
• Transfer the device firmly by both hands to the bottom edge of the base or
fixed parts of the body.
• Make sure that your hands and equipment are not damp or slippery when
carrying.
• For the sake of safety (in terms of size and weight), transfer the equipment
only to physically fit and competent persons.
There is a risk of serious injury or life threatening!
There is a risk of damage to the device!
9EN
Unpacking/Packaging
• Unpack and remove all parts and accessories of packaging materials, labels,
and labels before putting the device into operation. Keep all packaging
materials in a safe place or keep them out of the reach of children and
inappropriate persons.
There is a risk of serious injury!
There is a risk of choking!
Check/Commisioning
• Clean the device before commissioning as described in the „Commisioning“ or
„Cleaning and maintenance“.
• Never clean the appliance (body with electrical parts and control panel) and
the power cord with the plug - under running water, which could cause the
liquid to flow into the device.
• Clean these parts with a slightly moistened cloth and wipe dry or let it dry.
• Only clean the appliance if it is switched off and disconnected from the mains.
• We recommend performing both initial and subsequent regular device
inspections.
Caution!
• It is very important that the glass door and its seals are not damaged and that
they are well closed. No hinges may be damaged.
• Do not attempt to interfere with the construction or adjustment of the
component parts in any way.
• Never use the appliance if it is incomplete, damaged, or if any parts or
accessories are damaged during use. Have the appliance repaired by a
specialist workshop. There is a risk of serious injury!
Location/Installation
• Only place the appliance on straight, strong and stable pads - kitchen work
desks and furniture parts, suitable for the location of kitchen utensils.
• Always make sure that the place you want to place the device has enough
space, mechanical strength and appropriate lighting.
Warning!
• The appliance is intended for use as a freestanding appliance.
• Do not place the appliance:
- in enclosed cabinets or parts of furniture,
- unstable tables or inappropriate parts of furniture,
- on an uneven and dirty surface,
- on the sealing edge of tables or parts of furniture,
- near containers with water or other liquids.
• Do not expose the device to:
- direct sunlight, sources and equipment producing heat,
- vibration and mechanical stress,
- excessive dust,
- water and excess moisture,
- insect,
- aggressive effects of the external environment.
10EN
Caution!
• Always connect the power plug to a properly connected electrical socket with a
protective ground.
• Incorrectly connected protective earthing of the electrical socket may cause
electric shock.
• In the event of an electric short circuit, the earthing conductor reduces the risk
of electric shock.
• Consult your qualified electrician for any questions regarding earthing or
electrical installation.
• The manufacturer or seller is not responsible for any damage to the equipment
or personal injury resulting from failure to observe the correct electrical
connection procedure.
• Do not cover the appliance in part. Do not add anything to the device. Do not
insert or allow the foreign objects to enter the holes of the device covers.
• Do not cover the openings of the airflow covers. Air ventilation ensures reliable
and safe operation of the device.
• From a fire protection and safety point of view, the device can also be placed
on a work table or similar surface if a safe distance from the flammable
surfaces is maintained. materials:
- at least 30 cm above the top of the device and at least 10 cm in the other
directions.
• Pay attention to the support feet of the device. Their integrity and position
ensure a stable position, safe and correct operation of the device.
• The electrical socket and power cord must remain easily accessible for safe
disconnection of the device from the power supply.
There is a risk of electric shock!
There is a danger of fire!
Caution!
• Place the device in a place where children can not reach freely. Work desks
and furniture for placing should not be less than 85 cm.
• Prevent children from handling the device. The device may overwrite and
cause serious injury. Mechanical damage (breakage or breakage of parts and
covers) of the device can cause serious injury.
There is a risk of serious injury!
There is a risk of damage to equipment or other property damage!
• Do not place the appliance and do not use the proximity of containers
containing water. If the appliance falls into the water, do not remove it! First,
pull the power cord plug out of the mains socket and then select the appliance
from the water. In such cases, take the device for inspection to a specialist
service to check that it is safe and working properly.
There is a risk of electric shock!
There is a risk of electrical short circuit!
Tabla de contenidos
Otros manuales de Microondas de Orava
