OPT-6016 Manage Operating Instruction
www optone net 4
2.2 The Second Le el Menu [port]
Clear: Clear all characters of current screen
help: Display all commands line available
back: Return to the previous menu
vlan: Configure vlan based on port
frame: Configure frame size of the port
packets: Configure data package size ofFIFO-TX-RX
enable: Enable some ports
disenable: Disenable some ports
mode: Configure modes of the port
rate: Configure bandwidth of the port (Need to use cooperatively with command “suppression” under the second
level menu “config”)
2 2 1 Usage of [vlan]
1、 vlan add {1,2,3,15,16} – Add a vlan group, and classify 1, 2, 3, 15, 16 to the vlan group
2、 vlan all show – Show all vlan groups of the model
3、 vlan del 1 – Delete the first vlan group When there is only one vlan group, it cannot be
deleted The default classification is that all ports are in one vlan group
2 2 2 Usage of [frame]
1、 frame 1 norma – Set the port 1 frame size as normal mode, namely the max frame size is 1522
bits
2、 frame 1 jumbo – Set the port 1 frame size as jumbo mode, namely the max frame size is 9728
bits
3、 frame 1 show – show frame size of port 1
2 2 3 Usage of [packets]
1、 packets 1 5k – Set packets 1 size as 5K (packets size parameter: 5K, 10K, 13 5K)
