Optimal Speaker Design BLACK A5500 Manual de usuario
Revised: April 2020 TL
X5180
A5500
In this mode, the Status LEDs on the front panel will
glow yellow when the amplifier is in standby mode, and
bright blue when powered on.
When the switch is set to
TRIGGER, the A5500 goes into
standby mode and the front panel
status LEDs glow yellow. When
the connected device is turned on
the Status LEDs glow bright blue
If you set the MANUAL/TRIGGER
switch to Trigger, but don’t
connect the A5500 to another
device, the Status LEDS will be
bright Blue, but the amplifier will
not respond if you press the Power
button
Power: Bright Blue
Standby: Yellow
Protection: Red
Front Panel Status LEDs
The Front Panel Status LEDs will glow
yellow for Standby mode
Status LEDs will glow Blue
Mode and the Front Panel Status
LEDs will glow yellow.
the Status
LEDs will not be lit,
the Status LEDs will glow
.
Yellow.
Front Panel LEDs will glow bright blue.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Amplificador de Optimal Speaker Design
