Onlincam C36 Manual de usuario
User Manual
Onlincam C36
Action Camera is a high-definition digital motion video recording
device, created to reach market demand. It has a wide variety of the
leading features for digital video recording, photo shooting, audio
recording with screen display and detachable battery. Best suitable
for vehicle recording, outdoor sports, home security, diving and more
related activities. Allowing you to enjoy the moments while capturing
every scene anytime, anywhere.
INTRODCTION
PRODUCT OVERVIEW
English-1
Tips：
•Verify the camera is in Video Mode, Press and hold the Up Button
seconds to turn on/off Wi-Fi.
•Verify the camera is in Video Mode, press shortly the Down button to
switch between the front screen or the rear screen to display.
•Verify the camera is in Video Mode, press Down button for seconds
to turn on/off 2.4G remote controller.
•Verify the camera is in Photo Mode, Press and hold the Up Button or
Down Button to Zoom in/out photo.
•The 1.4-inch front screen has no operation function and is only used
for preview.
HELLO
Welcome to your new camera. To capture video and photos, you
need a micro SD card (sold separately).
STORAGE/MICRO CARDS
We strongly recommend to use the branded memory cards purchased
from regular channels for maximum reliability and stability during
recording and in high vibration activities.
Use brand name memory cards that meet these requirements:
GETTING STARTED
English-2
1. Lens
2. 1.4-inch Front Screen
3. Front Screen Working Indicator
4. 2.0-inch Touch Screen
5. Working & Charging Indicator
6. Shutter Button / Select Button
7. Mode Button/ Power Button
8. Battery Door
9. Bracket Hole
10. Speaker
11. Built-in Mic
12. HD Output Port
13. External Mic/Data/Charging Port
14. Up Button / Wi-Fi Button
15. Down Button / Screen Toggle Button /
- Remote Button
Note:
1. Please format the micro SD card first in this camera before using.
To keep your micro SD card in good condition, reformat it on a
regular basis. Reformatting erases all of your content, so be sure to
offload your photos and videos first.
2. FAT32 format Micro SD card stops recording when the storage of
each file is over 4 GB and starts to record again on a new file.
To Power ON: Press and hold the Power/Mode Button for seconds to
the screen on.
To Power OFF: Press and hold the Power/Mode Button for seconds
to the screen off.
To Switch Mode: There are 9 modes: Video,Time Lapse Video,Slow
Motion,Short Video, Under-water Mode，Driving Mode ,Photo,Pho-
to-Time lapse and Burst Photo.
(1)Turn on the camera, press Mode Button to Mode-Shift Mode, use
Up or Down Button to cycle through the various mode,then press
Shutter Button to desired mode. To exit, press Mode Button again.
(2)Turn on the camera, tap Mode icon to Mode-Shift Mode to switch
desired mode, as shown below:
English-3
POWERING ON+ OFF
SWITCHING MODE
• micro SD, micro SDHC, or micro SDXC
• UHS-III rating at least for 4K Video resolution
(at least 60MB/S or above read and writing speed)
• Capacity up to 128GB (FAT32)
To turn page, please swipe up or down on the screen as shown
below:
To exit, tap “X” icon.
English-4
1)Verify the camera is in Video Mode or Photo Mode, quickly swipe
right on the touch screen to enter Playback Mode, as shown below:
To exit Playback Mode, quickly swipe down on the screen.
2)Verify the camera is in Video Mode or Photo Mode，quickly swipe
down on the touch screen to switch to the Shortcut Mode, as shown
below:
To exit Shortcut Mode, quickly swipe up on the screen.
QUICK OPERATION GUIDE
VIDEO SETTING
Verify the camera is in Video Mode or Photo Mode, tap the setting
icon on the bottom right corner of the screen, then swipe up or down
to cycle through the various option and tap the desired option,or
press Up Button or Down Button to cycle through the various option
and press Shutter Button to select the desired option.
English-5
CUSTOMIZING YOUR CAMERA
3)Verify the camera is in Video Mode or Photo Mode,Quickly swipe
up on the screen to switch to the Mode Shift Mode, as shown below:
to exit, tap the icon “X”on the top right corner of the screen
4)Verify the camera is in Video Mode or Photo Mode: Swipe left
quickly on the touch screen to switch fast to the Video Settings or
Photo Settings, as shown below:
Notes:
• When capturing video at high resolution or high frame rates such
as 4K 60/30fps, the camera may become hot and consume more
power, which is normal.
• When capturing video at high resolutions or high frame rates in
warm ambient temperatures, the camera may become warm and
use more power.
• Image Stabilization is disabled when you select1080P 120fps or
720P 120/240fps.
• If you turn on EIS, Slow Motion ,Auto Low Light and LDC will not be
available automatically.
• FAT32 format Micro SD card stops recording when the storage of
each file is over 4GB and starts to record again on a new file. You
cannot set 5min video file length when camera is at 4K 60fps, 5min
4K 60fps video file is over 4GB.
• If you turn on Loop Video, Time-Lapse Video,TL Duration and Slow
Motion will not be available automatically.
• If you use this camera as a dash camera, you should turn loop
video and driving mode at same time. but save only the latest
moments recorded.
• Time Lapse Video is captured without audio.
• If you use Time-Lapse Video function, the camera can not recorded
the video over 30fps.
English-6
Note:
• If use Long Exposure function, Time Lapse Photo,TL Duration, Burst
Photo and Delay Timer will not be available automatically.
• If use Time Lapse Photo function, Burst Photo, Delay Timer and
Long Exposure will not be available automatically.
PHOTO SETTING
Verify the camera is in Photo Mode, tap the setting icon on the
bottom right corner of the screen, then swipe up or down to cycle
through the various option and tap the desired option,or press Up
Button or Down Button to cycle through the various option and press
Shutter Button to select the desired option.
In Photo Mode, tag the zoom icon to adjust the zoom level.
• If you use Time-Lapse Video function, Loop Video,Slow Motion and
Fast Motion will not be available automatically.
• If you want to set Time Lapse Duration, please turn on Time Lapse
Interval first.
• Please select 1080P 120FPS, 720P 240FPS or 720P 120FPS when
you want to record slow motion movie.
• If you use Slow Motion function, EIS,Time-Lapse Video and Fast
Motion will not be available automatically.
• Using as a dash cam, we suggest to turn on the Loop Video, Driving
Mode and Screen Saver at same time.
English-7
• If you want to use TL Duration, please turn on Time Lapse Photo
interval first.
• If use Burst Photo function, Time Lapse Photo,TL Duration and
Long Exposure will not be available automatically.
Note:
• Snorkeling mode provides color correction while capturing footage
in blue water or clear freshwater at depths of 5 to 33ft (1.5 to 10m)
• Snow mode can suppress overexposure in high-brightness environ-
ments such as snow field or beach.
• If the battery is removed from the camera for an extended period of
time, the date and time will be reset automatically.
•Software version is the main information of firmware upgrade, trouble-
shooting and after-sales. If necessary, please provide the software
version information to our after-sales team so that we can serve you in
time.
SYSTEM SETTING
Verify the camera is in Video Settings or Photo Settings, tap the
setting icon on the upper right corner of the screen to System
Setting, then swipe up or down to cycle through the various option
and tap the desired option,or use Up Button or Down Button to cycle
through the various option and press Shutter Button to select the
desired option.
English-8
Notes
• FAT32 format Micro SD card stops recording when the storage of
each file is over 4 GB and starts to record again on a new file
• This camera automatically stops recording when the battery is out
of power. Your video will saved before the camera powers off. The
video will not be saved, and even the video will be damaged,if the
batter is took out or loss power during recording.
• Due to the battery's characteristics and environmental temperature
requirements, such as high temperatures can cause the battery to
expand. In high temperature environments, especially in the
summer, when you use this camera as a dash camera, we strongly
recommend that you remove the battery and use the car power
directly, but when the car's engine is turned off, the camera will
immediately turn off, the date&time set and last video recorded will
not be saved
To record video,verify the camera is in desired Video Setting option
and set the desired video resolution.
VIDEO MODE
To Start Recording:
To press the Shutter Button. The camera’s blue Working Indicator
will flash and a Red Dot will show on the screen while recording.
To Stop Recording:
To press the Shutter Button again. The camera Working Indicator
stop flashing and the Red Dot disappear on the screen to indicate
recording has stopped
English-9
Tabla de contenidos
