One-Touch Drinks Rio Manual del propietario
Programming Manual
Rio
Espresso & Chocolate
F
Rio Programming Manual
Revision 05 – 2019
2
I N D E X
PROGRAMMING FUNCTIONS
1. Access to programming
2. Programming keyboard
3. Personal menu
on the machine
4. Programming functions: .
-Group 000: Actions
-Group 100: Accounting
-Group 200: Programming prices and sales mode
-Group 300: Programming selections
-Group 400: Programming Service mode p. 30-47
p. 3
p. 3
p. 4
p. 4-6
p. 9-23
p. 24-26
p. 27-29
p. 6-8
F
Rio Programming Manual
1ª revisión 05 – 2019
3
PROGRAMMING
1. Access to programming menu
Get access to programming mode by pressing
the Pbutton on the back side of the door for
one second.
Short press on P button, allows access to
some of the functions, the default
personal menu of functions. These functions
can be modified directly on this access
mode. Navigation through the options is
done by service buttons on the front door.
(explained below) and the selection is viewable
on the LED screen.
2. Programming keyboard
After pushing the button: PROG to access to programming mode, display will show
the first available function on the LED screen: 010 LISTING:
Navigation is done by using the 4 buttons on the front
door, the upper row service buttons A, B, C, D.
The function of each service button is:
Button A, move forward through the options.
Button B, move backwards through the options.
Button C, go back or go out.
Button D, access, enter or confirm.
Button E, enables one free vend.
Button F, activates cleaning mixer one time.
Button G, shows the boiler temperature
Button H, not used.
Listings
F
Rio Programming Manual
1ª revisión 05 – 2019
4
3. Personal menu
Press and hold programming button P, to bring up full listings of functions use
A/B buttons to navigate to desired function. Press D button to change the “-“to
“P”. This will have added the desired function to the personal menu. Press the
programming button to exit. Press now the programming button briefly to
bring up the personal menu. Use A/B buttons to navigate and find the added
function. Press D to access to it.
Example below:
Pushing coffee Service
button 4 changes –to P.
Push coffee Service button 1 to move to next function.
4. Programming Functions
Below, the complete list of functions for Rio, together with an explanation of
the most relevant ones.
Function Description
010 Communications
030 Machine Test
090 Software Version
099 Initialize machine
110 Money amount per selection
111 Units sold per selection
113 Units sold in Free Sale
120 Total amount of money
121 Total units sold
122 Total amount of money in Free Sale
141 Total money in the cashbox
142 Total money in returning tubes
145 Money given when F001 was done
146 Amount of return not given
"Fill Tubes" "Fill Tubes"
"EmptyTubes"
F
Rio Programming manual
1ª revisión 05 – 2019
5
147 Total money from sales with prepay card
148 Total money from recharge of prepay card
149 Total money of selling with banknotes
171 Delete accountability data
180 Accumulated total money amount received
191 Accumulated money amount got from
each selection
201 Program selling price for each selection
204 Program single price
220 Free Sale
221 Single sale / Multi sale / Forced sale
300 Link buttons to coffee services
Function Description
315 Recipe programming
317 Modify preselection programming
401 Load a standard configuration (CMQ) of
the machine
412 Program coins accepted
416 Program maximum coins accepted
418 Program coins accepted in “No change” mode
419 Program the minimum number of coins in
each tube
420 Advertisement message
421 Default advertisement message
424 Failure message
430 Language
431 Name of the coin
432 Number of decimals
454 Card reader YES / NO
455 Bill reader YES / NO
461 Program boiler temperature
463 Automatic cleaning of mixers
465 Autonomy kit YES / NO
F
Rio Programming Manual
05 – 2019
6
472 Sanitary temperature
490 Program the names of canister
491 Program operator code
Group 000: Actions
Function 010 <<LISTING>> Data related to the event log.
This allows you to see or print the accounting data and the
incident log on paper. The data goes to a RS-232-C port in ASCII
format with lines of 40 columns.
010 LISTING
D
SEND DATA PRIN
AShow another two options on the display: SEND INCIDENT
PRINTER and SEND INCIDENT DISPLAY.
B
D Execute the incident shown on the display.
C Back to main menu.
SEND LOG PRINTER.
This option sends a report with the last 50 events in the machine; they can be sent to
a printer or to a PC. The data sent, can be viewed on a computer, using the
hyperterminal software.
SEND DATA PRINTER
This option sends a report of machine sales accounting; You can send it to a printer or
to a PC. The data sent, can be viewed on a computer, using the hyperterminal
software. So that the printer or the PC receive events or accounting data correctly,
you must program the following information:
•Speed: 9600
•8-bit
•parity: no
• 1 bit stop
• flow Control: no
F
Rio Programming Manual
05 – 2019
7
SEND LOG DISPLAY
the past events in machine are sent to the display of the machine, the list of these events is
described below.
Function 030
<<TEST MACHINE>>
Test for different elements in the
machine.
Run a test of the different elements of the machine.
030 TEST MACHINE
D
The display shows the first element to be tested.
MOTORS
D
The display shows the second element to be tested.
TEST OK
A
The display shows the second element to be tested.
DRAWERS
D
C
Execute the test.
Back to main menu.
The process is always the same, and the elements to do the tests on are the following:
Motors
Drawers: from A to H.
Gate: open and close gate
Lift.
Delivery hatch
Temperature
I-detect
Mixers
Extractor
F
Rio Programming manual
05 – 2019
8
Electro valve
Refill boiler
Move group
Grinder
Dosage
Group cleaning with tablet
Etc
Function 099
<<INITIALIZAT.>>
Carry out a complete reset of the
programming on the machine.
Executing this function will erase the EEPROM memory and it will
automatically recuperate the last configuration introduced with the User
Tool Herr-mant. If there is not any configuration, it will load the factory
default programming.
099 INITIALIZAT.
D
LOADING DATA
Now the data will be deleted.
F
Rio Programming Manual
05 – 2019
9
Group 100: Accounting
Function 110
<<MONEY/SELECT>>
The total amount taken in sales for
each selection.
This shows the takings from sales for each product selection.
110 MONEY/SELECT
D
S01 PRESS SELECTION
On pressing a selection, the display shows the sales for this
selection.
C
Back to main menu.
Function 111
<<UNITS/SELECT>>
Units sold for each selection.
This shows the number of sales for each product selection.
111 UNITS/SELECT
D
S01 PRESS SELECTION
On pressing a selection, the display shows the number of sales.
C
Back to main menu.
Otros manuales para Rio
1
Tabla de contenidos
Otros manuales de Cafetera de One-Touch Drinks
