Omron STC-HD203 Series Instrucciones de instalación

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 1/78

16:9 Format 1080p

STC-HD203 Series Color CMOS Camera

STC-HD203DV (DVI output / C mount)

STC-HD203DV-CS (DVI output / CS mount)

STC-HD203SDI (SDI output / C mount)

STC-HD203SDI-CS (SDI output / CS mount)

Product Specifications and Users Guide

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 2/78

Table of Contents

1 Product Precautions ............................................................................................ 6

2 Warranty ................................................................................................................ 6

3 Introduction .......................................................................................................... 7

3.1 Features .................................................................................................................................... 7

3.2 Naming Method ........................................................................................................................ 7

3.3 Peripheral Equipment .............................................................................................................. 7

4 Specifications ....................................................................................................... 8

4.1 Electronic specifications ......................................................................................................... 8

STC-HD203DV / STC-HD203DV-CS .................................................................................................. 8

STC-HD203SDI / STC-HD203SDI-CS ................................................................................................ 9

4.2 Spectral Sensitivity Characteristics ..................................................................................... 10

4.3 Mechanical Specifications ..................................................................................................... 11

STC-HD203DV / STC-HD203DV-CS ................................................................................................. 11

STC-HD203SDI / STC-HD203SDI-CS ............................................................................................... 11

4.4 Environmental Specifications ............................................................................................... 11

4.5 External Control Specification .............................................................................................. 12

5 3. Dimensions ..................................................................................................... 13

5.1 STC-HD203DV ......................................................................................................................... 13

5.2 STC-HD203DV-CS ................................................................................................................... 14

5.3 STC-HD203SDI ........................................................................................................................ 15

5.4 STC-HD203SDI-CS .................................................................................................................. 16

6 Control Software User’s Guide.......................................................................... 17

6.1 System Requirements ............................................................................................................ 17

6.2 Basic Operating Procedure ................................................................................................... 17

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 3/78

6.3 Button Description ................................................................................................................. 18

6.4 The Difference of uCOM register and DSP register ............................................................. 18

6.5 Functional Description........................................................................................................... 19

7 The communication protocol specifications .................................................... 34

7.1 Communication settings........................................................................................................ 34

7.2 Communication format .......................................................................................................... 34

7.3 Camera control commands ................................................................................................... 35

The command list for the communication .................................................................................... 35

Slave address for the ICs (8 bits) list ............................................................................................. 37

Error code list ................................................................................................................................. 37

7.4 The uCOM register mapping list ........................................................................................... 38

Push Button Function on Meru ...................................................................................................... 43

Push button function list ................................................................................................................ 44

7.5 The DSP register mapping list .............................................................................................. 45

7.6 OSCD (On Screen Character Display) Command ................................................................ 57

2 Byte Command ............................................................................................................................. 57

2 Byte consecutive Command ....................................................................................................... 59

8 Camera instruction guide .................................................................................. 60

8.1 Push Button ............................................................................................................................ 60

8.2 Camera Setting through External Switch (Remote Controller) .......................................... 61

Camera Setting through Switch that has 3.5φStereo Pin Jack ................................................... 61

Menu on screen with External Switch ........................................................................................... 62

9 Revisions ............................................................................................................ 76

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 4/78

Precautions for safe use

Please read carefully this “Precautions for safe use” before use the camera. Then the camera uses correctly with

agreeing with below notes.

In this “Precautions for safe use”, notes divides into “Warning” and “Caution” to use the camera safety and prevent to

harm and damage.

Warning This shows, assumption for possibility of serious accident leading death or

serious injury if ignore this note and camera uses incorrectly.

Caution This shows, assumption for possibility of bear the damage or physical

damage if ignore this note and camera uses incorrectly.

About Graphic

symbols

This symbol shows general prohibition.

This symbol shows completion or instruction.

[Environment / condition]

Warning

Do not use flammable or explosiveness

atmospheres.

This will cause of personal injury or fire.

Do not use for “safety for human body” related

usage.

This camera is designed for use “do not harm

human body immediately” if by any chance the

camera has malfunction.

Caution

Use and store under specified environmental

conditions (Vibration, shock, temperature,

humidity) in the specifications for this camera.

This will cause of fire or damage the camera.

[Installation and cable wiring]

Warning

Do not use with out of power voltage range

that is specified in the specifications for this

camera.

This will cause of fire, electrification or

malfunction.

Do not wrong wiring.

This will cause of fire or malfunction.

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 5/78

Caution

The camera housing is not connecting to 0 V

line of camera inside circuit.

There is a risk of short circuit between camera

inside ciurcuit and frame ground through other

devices.

This will cause of malfunction.

It is necessary to wiring and mounting that is

specified in the specifications for this camera.

This will cause of fire or malfunction.

It is necessary to wiring with turn off the camera.

This will cause of electrification or malfunction.

It is necessary to mounting the camera without

stress for the cable.

This will case of electrification or fire.

[Usage instruction]

Warning

Do not touch the terminal and PCB board

While turn on the camera.

This will cause of electrification or accident

caused by malfunction.

Do not put combustibles near the camera.

This will cause of fire.

Do not use without usage that is specified in

the specifications for this camera.

This will cause of personal injury or malfunction.

Do not push metals including screw driver into

radiation holes.

This will cause of electrification or malfunction.

Caution

Do not push contamination into opening of

the camera.

This will cause of electrification or malfunction.

Do not block the radiation holes.

This will cause of fire due to increase the

camera inside temperature.

[Maintenance]

Caution

Do not disassemble or repair the camera.

This will cause of fire, electrification or

malfunction.

It is turn off the camera when maintaining or

inspecting the camera.

This will cause of electrification.

[Disposal]

Caution

It is necessary to dispose as industrial waste.

]

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 6/78

1 Product Precautions

 Do not give shock to the camera.

 Do not haul or damage the camera cable.

 Do not wrap the camera with any material while using the camera. This will cause the internal camera

temperature to increase.

 When the camera moving or using the place that temperature difference is extreme, countermeasure for

dew condensation (heat removal / cold removal) is necessary.

 While the camera is not using, keep the lens cap on the camera to prevent dust or contamination from getting

in the sensor or filter and scratching or damaging it.

Do not keep the camera under the following conditions.

・ In wet, moist, high humidity or dusty place

・ Under direct sunlight

・ In extreme high or low temperature place

・ Near an object that releases a strong magnetic or electric filed

・ Place with strong vibrations

 Apply the power that satisfies the specified in specifications for the camera.

 The defective pixels may appear due to the sensor characteristics.

 Use below recommend materials (or equivalent materials) to clean the surface of glass.

・ Air dust: Non Freon air duster (NAKABAYASHI Co., LTD.)

・ Alcohol: Propan-2-ol (SAN’EI KAKO Co., LTD.)

・ Non-woven: nikowipe clean room (NKB)

 Use a soft cloth to clean the camera.

2 Warranty

■Warranty period

One year after delivery (However, the camera had malfunction with camera uses correctly)

In below case for a fee even within warranty period.

・The malfunction caused by incorrect usage, incorrect modify or repair.

・The malfunction caused by external shock including the camera dropping after delivery the camera.

・The malfunction caused by fire, earthquake, flood disaster, thunderbolt struck, other natural disaster or

wrong voltage.

■Warranty coverage

Exchange or repair the malfunction camera if the malfunction is occurred by our responsibility.

“Warranty” mean is warranty for the delivered camera itself. Please accept the induction damage by the

camera malfunction is not included.

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 7/78

3 Introduction

This document describes the specification of the following cameras:

STC-HD203DV / STC-HD203DV-CS (DVI output model)

STC-HD203SDI / STC-HD203SDI-CS (SDI output model)

3.1 Features

 1080p CMOS Sensor

 DVI / SDI Output

 Camera adjustment with OSCD (On Screen Character Display) through Remoter Controller (Option)

 Configurable many parameters through Control Software

 Eight configurable DSP can be saved

 Wide Dynamic Rage (ATR-EX)

 Defective Pixel Correction (JTACtrl v1.02 or later)

3.2 Naming Method

STC-HD203xx

3.3 Peripheral Equipment

We provide as follow peripheral equipment as option.

+12V DC Power Supply: UN310-1210

Remote Controller: RC-HD133

Communication Tool (communicate through USB port on PC): JIG-USB-HD

Control Software: JTACtrl (Free)

Note: This camera may become hot when operating 1080p output. Please do not use camera without original camera

housing.

Back Panel

DV: DVI Output

SDI: SDI Output

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 8/78

4 Specifications

4.1 Electronic specifications

STC-HD203DV / STC-HD203DV-CS

Default: Bold

(*1) Longest exposure time is depending on video output mode

Model Number STC-HD203DV STC-HD203DV-CS

Image Sensor 1/2.8" 2.3M Progressive Color CMOS (SONY: IMX136)

Shutter Type Rolling Shutter

HD Active Picture Elements 1,920 (H) x 1,080 (V)

Cell Size 2.8 (H) x 2.8 (V) µm

Sync. System Internal

Video Output DVI 1.0 conformity RGB

1080P60 / 1080P59.94 / 1080P50 / 1080P30 / 1080P29.97 / 1080P25 /

720P60 / 720P59.94 / 720P50 (Default: 1080P60)

Minimum Scene Illumination 0.6 Lux (AGC ON) @ F1.2

Camera Functions

ALC Can be configured via the UART communication with auto electronic shutter and AGC

Shutter Speed Adjustable shutter speed via the UART communication (AEE) (Default: Auto)

Extended Extend shutter frame unit (Up to 2.55 seconds)

High Speed From 1/10,000 seconds (*1)

Gain

AGC or Fixed gain selectable via the UART communication (Default: AGC)

0 to 45 dB

Gamma Selectable gamma through 5 preset (one preset is manual / 0.45 / 0.6 / 0.8 / 1)

Selectable gamma via the UART communication (Default: manual)

White Balance Auto white balance / manual white balance / push to set white balance

Selectable white balance via the UART (Default: Auto white balance)

WDR Wide Dynamic Range OFF/ON (Default: OFF)

WDR enable via the UART communication

Mirror Image Normal image / horizontal flip / vertical flip / horizontal vertical flip (180 degree rotation)

(Default: Normal image)

Picture Modes 8 user preset mode, Normal picture mode or pseudo color mode can be selectable

Selectable picture mode via the UART communication (Default: Preset 0)

Line Generator

Both horizontal and vertical with all available colors (Line number: 2)

Adjustable thickness via the UART communication (Default: Disable)

Shadow Mask

Generator

Both horizontal and vertical with shading level adjustment via the UART communication

(Default: Disable)

Still Image Selectable Live image or freeze image via the UART communication

Communication +3.3V UART communication via 3.5Φ Stereo Jack

(Baud rate: 38,400bps / 19,200bps / 9,600bps)

Character Generator

Built-in character generation function via the UART communication

Defective Pixel

Collection

Support

Power Input Voltage +9 to +15 Vdc (Typical: +12 Vdc)

Consumption 4.4 W (Typical)

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 9/78

STC-HD203SDI / STC-HD203SDI-CS

Default: Bold

(*1) Longest exposure time is depending on video output mode

Model Number STC-HD203SDI STC-HD203SDI-CS

Image Sensor 1/2.8" 2.3M Progressive Color CMOS (SONY: IMX136)

Shutter Type Rolling Shutter

HD Active Picture Elements 1,920 (H) x 1,080 (V)

Cell Size 2.8 (H) x 2.8 (V) µm

Sync. System Internal

Minimum Scene Illumination 0.6 Lux (AGC ON) @F1.2

Video Output 3G-SDI (Physical layer: SMPTE 424M, Data Mapping: SMPTE 425M Level-A Compliant),

4:2:2 YCbCr 10bit 1080P60 / 1080P59.94 / 1080P50

HD-SDI (SMPTE292M Compliant) 4:2:2 YCbCr 10bit 1080P30 / 1080P29.97 / 1080P25

720P60 / 720P59.94 / 720P50

(Default: 1080P60)

Camera functions

ALC Can be configured via the UART communication with auto electronic shutter and AGC

Shutter Speed Adjustable shutter speed via the UART communication (AEE) (Default: Auto)

Extended Extend shutter frame unit (Up to 2.55 seconds)

High Speed From 1/10,000 seconds (*1)

Gain

AGC or Fixed gain selectable via the UART communication (Default: AGC)

0 to 45 dB

Gamma Selectable gamma through 5 preset (one preset is manual / 0.45 / 0.6 / 0.8 / 1)

Selectable gamma via the UART communication (Default: manual)

White Balance Auto white balance / manual white balance / push to set white balance

Selectable white balance via the UART (Default: Auto white balance)

WDR Wide Dynamic Range OFF/ON (Default: OFF)

WDR enable via the UART communication

Mirror Image Normal image / horizontal flip / vertical flip / horizontal vertical flip (180 deg. rotation)

(Default: Normal image)

Picture Modes 8 user preset mode, Normal picture mode or pseudo color mode can be selectable

Selectable picture mode via the UART communication (Default: Preset 0)

Line Generator

Both horizontal and vertical with all available colors (Line number: 2)

Adjustable thickness via the UART communication (Default: Disable)

Shadow Mask

Generator

Both horizontal and vertical with shading level adjustment via the UART communication

(Default: Disable)

Still Image Selectable Live image or freeze image via the UART communication

Communication +3.3V UART communication via 3.5Φ Stereo Jack

(Baud rate: 38,400bps / 19,200bps / 9,600bps)

Character Generator

Built-in character generation function via the UART communication

Defective Pixel

Collection

Support

Power Input Voltage +9 to +15 Vdc (Typical: +12 Vdc)

Consumption 4.4 W (Typical)

No. 13S054-10

STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS

Product Specifications and Users Guide 10/78

4.2 Spectral Sensitivity Characteristics

Relative response

400 450 500 550 600 650 700

Wavelength (nm)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de visión artificial de Omron

Omron

Omron fh series Manual de usuario

Omron

Omron FJ-350 Manual de usuario

Omron

Omron FJ-3000-10 Manual de usuario

Omron

Omron fh-1 series Manual de usuario

Omron

Omron Vision Sensor FH Series Manual de instrucciones

Omron

Omron Vision Sensor FH Series Manual de instrucciones

Omron

Omron FLV-DB Series Manual de usuario

Omron

Omron fh series Manual de instrucciones

Omron

Omron fh series Manual de instrucciones

Omron

Omron STC-MBS312POE Instrucciones de instalación

Omron

Omron STC-APB503PCL Instrucciones de instalación

Omron

Omron FLV-FB Series Manual de usuario

Omron

Omron FH-L550 Manual de usuario

Omron

Omron fh series Manual de usuario

Omron

Omron fh-1 series Manual de usuario

Omron

Omron Vision Sensor FH Series Manual de instrucciones

Omron

Omron fh series Guía del usuario

Omron

Omron FJ-300 Series Manual de usuario

Omron

Omron FLV IR Series Manual de usuario

Omron

Omron SYSMAC FH Series Manual de usuario

Omron

Omron FLV-EP Series Manual de usuario

Omron

Omron FLV-DD Series Manual de usuario

Omron

Omron FLV-FX100R Manual de usuario

Omron

Omron CoaXPress STC-MBS510CXP6 Instrucciones de instalación

Manuales populares de Sistema de visión artificial de otras marcas

Festo

Festo SBOC-M-R1B-H Manual de usuario

Banner

Banner VE200G1B Manual de usuario

SVS-Vistek

SVS-Vistek CoaxPress EoSens Creation 1.1CXP2 Manual de usuario

Sony

Sony Vision Exchange PEQ-C100 Manual de usuario

Datalogic

Datalogic MX-U81 Instrucciones de instalación

Cognex

Cognex In-Sight D900 Series Manual de usuario

Spektrum

Spektrum SPMVR2520 Manual de usuario

Huaray

Huaray Movidius Series Manual de usuario

Daheng Imaging

Daheng Imaging MERCURY2 USB3 Manual de usuario

SVS-Vistek

SVS-Vistek exo174 U3 Series Manual de usuario

Teledyne

Teledyne e2v Eliixa+ Series Manual de usuario

Photron

Photron FASTCAM Mini CX Series Manual de usuario

National Instruments

National Instruments Vision CVS-1455 Manual de usuario

iGen

iGen NV20/20 Manual de usuario

JAI

JAI GO-5100MP-USB Manual de usuario

Ark Vision Systems

Ark Vision Systems AVS-Monitor 7 FHD Manual de usuario

Cognex

Cognex In-Sight 9902L Manual de usuario

Feniex

Feniex C-5500 Manual de usuario