Omron SmartVision MX Manual de usuario

I608-E-03

SmartVision MX

Userʼs Guide

The information contained herein is the property of Omron Adept Technologies, Inc., and shall not be

reproduced in whole or in part without prior written approval of Omron Adept Technologies, Inc. The

information herein is subject to change without notice and should not be construed as a commitment by

Omron Adept Technologies, Inc. The documentation is periodically reviewed and revised.

Omron Adept Technologies, Inc., assumes no responsibility for any errors or omissions in the doc-

umentation. Critical evaluation of the documentation by the user is welcomed. Your comments assist us

in preparation of future documentation. Please submit your comments to: techpubs@adept.com.

Any trademarks from other companies used in this publication

are the property of those respective companies.

Created in the United States of America

Table of Contents

Chapter 1: Introduction 7

1.1 Product Description 7

Features 7

What Comes with a SmartVision MX? 8

What Doesn’t Come with a SmartVision MX? 10

1.2 How Can I Get Help? 10

Related Manuals 10

Chapter 2: Safety 11

2.1 Dangers, Warnings, and Cautions 11

Alert Icons 11

Special Information 12

2.2 What to Do in an Emergency / Abnormal Situation 12

Stopping the Robot 12

Fire Response 12

2.3 Safety Precautions 12

2.4 Additional Safety Information 13

Manufacturer’s Declarations 13

Robot Safety Guide 13

2.5 Disposal 13

Chapter 3: Installation 15

3.1 Inspecting 15

3.2 Transport and Storage 15

3.3 Mounting the SmartVision MX 15

Vertical Mounting 16

Desk-top Mounting 16

Stack Mounting 16

3.4 Connecting Power 18

External Power Supply 18

Recommended Power Supplies 19

Recommended UPS Units 19

Installing 24 VDC Connector 19

Connecting to a SmartController 20

3.5 Connecting Display, Keyboard, and Mouse 21

14362-000 Rev. D SmartVision MX User'sGuide 3

Table of Contents

Chapter 4: Connectors and Indicators 23

Camera Side 23

Power/IO Side 24

4.1 Ethernet Ports 25

4.2 USB Ports 25

4.3 DVI- Ports 25

4.4 Audio and Serial Ports 25

Chapter 5: Operation 27

5.1 Operating Environment 27

5.2 Turning Power ON and OFF 27

5.3 Checking the Licenses on the Dongle 27

Chapter 6: Technical Specifications 29

6.1 Processor Specifications 29

6.2 Environmental Specifications 29

6.3 Power Requirements 29

6.4 Dimensions 30

6.5 Connections 31

6.6 Camera Specifications 32

Chapter 7: Options 33

7.1 License Options 33

Software License Details 33

7.2 Mounting Options 33

Mounting Kits 33

4 SmartVision MX User'sGuide 14362-000 Rev. D

Revision History

Revision

code Date Revised Content

01 May, 2016 Original release

02 March, 2017 lAdded recommended Omron UPS units.

lChanged to OAT.css.

lReplaced dimension drawing in technical specifications.

lExpanded no-internet caution.

lRecommended vertical mounting.

lCorrected power input and consumption.

lUpdated graphics for OAT logo and for better clarity.

03 March, 2019 lAdded WEEE disposal information.

lRemoved reference to www.adept.com.

lUpdated copyright for 2019.

lAdded mounting bracket part number in Chapter 3:

Installation.

lUpdated illustrations with call-outs for translation com-

patibility and other minor improvements.

lUpdated Chapter 2: Safety with new format and inform-

ation.

lReplaced discontinued S8JX-G power supply with

replacement S8FS-Gseries.

lAdded missing captions to tables.

lAdded bracket number, detail and adjusted figures in

Chapter 3: Installation.

lAdded mounting kit information

lModified software license details to Chapter 7: Options .

lUpdates to indicate Digital I/Ois not supported.

lUpdated USBlicense dongle details.

lAdded camera specifications table to Chapter 6: Tech-

nical Specifications.

14362-000 Rev. D SmartVision MX User'sGuide 5

Chapter 1: Introduction

1.1 Product Description

The SmartVision MX is a Windows®7 Embedded industrial PC designed to run ACE soft-

ware. It is compatible with the SmartController line of products, or can be used with our robots

that don’t use a SmartController.

For inspection applications, the SmartVision MX industrial PC is designed to be a “plug-and-

play” vision system. Using a USB or GigE camera, along with ACE’s PC-based vision soft-

ware, the unit is a complete industrial vision solution.

When used with a SmartController, the SmartVision MX provides expanded vision processing

power for vision-guided robotics or inspection.

Figure 1-1. The SmartVision MX Industrial PC

Features

The SmartVision MX provides the following features:

lCompatibility with the SmartController line of products

lIntel PC platform, with Core i7 processor

lWindows 7 Embedded OS

lPorts for both Gigabit and USB 3.0 cameras

14362-000 Rev. D SmartVision MX User'sGuide 7

8 SmartVision MX User'sGuide 14362-000 Rev. D

1.1 Product Description

Four Gigabit ports provide Power over Ethernet.

lStandard Gigabit LAN

lStandard RS-232 interface

lBoth DVI-D and DVI-I ports

lUSB ports can support a keyboard and mouse, for standalone operation

lDVI-D or DVI-I ports can support a monitor, for standalone operation

What Comes with a SmartVision MX?

Hardware

The SmartVision MX includes:

lIntel®Core i7

l8 GB DDR3 memory

l64 GB mSATASSDdrive

The drive is partitioned into a C: drive and a D: drive. By default, the C: drive uses a

file-based write filter, to protect the Windows operating system and ACE software. We

recommend that you leave this write filter enabled for C: in normal use.

Because the OS and ACE software are on C:, you should be very cautious about using C:

for any other purpose, particularly for other applications.

lMatching connector for VDC input power

lA USB license dongle, which enables licenses for one or more of the following:

oACESight software, 2 camera support (ACE 3.7+ license does not restrict number

of cameras)

oACE PackXpert, 1 controller support (ACE 3.7+ license does not restrict number

of controllers)

oACE PackXpert with ACESight software, 2 camera and 1 controller support

(ACE 3.7+ license does not restrict number of controllers or cameras)

oAny additional camera or controller licenses that you purchased

oOther licenses can be purchased to increase the number of cameras and con-

trollers supported(ACE 3.6 or earlier)

Chapter 1: Introduction

Figure 1-2. USB License Dongle in USB 2.0 Port 1

A SmartVision MX can support a total of eight cameras and four controllers.

Software

The following software is pre-loaded on the hard drive:

lWindows®7 Embedded

lACE

lACE Sight 3 (ACE-based vision software)

lDrivers for Basler ACEcameras (USB and GigE)

The SmartVision MX is designed to run ACE software. We do not support applications other

than ACE.

Options

For details on options, see Options on page 33.

lExtended licenses, enabled on the USB license dongle

lStack-mounting brackets

14362-000 Rev. D SmartVision MX User'sGuide 9

10 SmartVision MX User'sGuide 14362-000 Rev. D

1.2 How Can I Get Help?

What Doesn’t Come with a SmartVision MX?

l24 VDC power supply to power the SmartVision MXindustrial PC (see External Power

Supply on page 18).

lCameras and camera cables

lKeyboard, mouse, and monitor

These should be user-supplied, so you can run the ACE and ACESight applications,

and well as control shutting down the industrial PC.

lIf power interruption is a concern, a UPS is recommended (see External Power Supply

on page 18).

1.2 How Can I Get Help?

For details on getting assistance with your software or hardware, you can access the corporate

website:

http://www.ia.omron.com

Related Manuals

This manual covers the installation and use of a SmartVision MX. The following manuals

provide information on safety, related products, advanced configurations and system spe-

cifications.

Table 1-1. Related Manuals

Manual Title Description

Robot Safety Guide Contains safety information for our robots.

ACE User’s Guide Instruction for the use of the ACE software.

ACESight User’s Guide Instruction for the use of the ACESight software.

SmartController EX User's

Guide

Contains information on the installation and operation of the

optional SmartController EXand sDIO products.

Otros manuales para SmartVision MX

Tabla de contenidos

Otros manuales de Controladores de Omron

Omron

Omron CK5M-CPU1 1 Series Guía del usuario

Omron

Omron NX Series Manual de usuario

Omron

Omron ES100 Manual del propietario

Omron

Omron NE1A-SCPU01 - 2006 Manual de usuario

Omron

Omron Sysmac NX701 Manual de usuario

Omron

Omron E5_N-H Series Manual de usuario

Omron

Omron SCC-1224 Manual de usuario

Omron

Omron E5CK-AA1-500 AC/DC24 Manual de usuario

Omron

Omron F3SX Series Manual de usuario

Omron

Omron CJ1W-PNT21 Manual de usuario

Omron

Omron E5EN Manual de usuario

Omron

Omron NX Series Instrucciones de uso

Omron

Omron K8AK-LS Manual de usuario

Omron

Omron CK3W-GC 00 Series Instrucciones de uso

Omron

Omron NX701-1 series Manual de usuario

Omron

Omron CPM1 - PROGRAMING 02-2001 Manual del propietario

Omron

Omron F3SX-N-L2RR2 Manual de usuario

Omron

Omron 61F-GPN-BC Manual de usuario

Omron

Omron YSC-8361 Manual de usuario

Omron

Omron G9SP Series Manual de usuario

Omron

Omron SYSMAC C200HW-ZW3AT2-E-V2 Manual de usuario

Omron

Omron NC1-510000 Manual de usuario

Omron

Omron E5 Z Series Manual de usuario

Omron

Omron CPM1 - PROGRAMING 02-2001 Manual del propietario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario