Omron FZ2 Series Manual de usuario

Cat. No. Z275-E1-01

FZ2 Series

Vision Sensors

USER'S MANUAL

FZ2 Series User's Manual

Vision Sensor

Rev.A

How This Manual Is Organized

This Manual includes two manuals, "User's Manual", which describes the basic

operations and settings of vision sensors, and "Processing Item List Manual", which

describes the setting options of each processing item.

Conventions Used in This Manual

Symbols

The symbols used in this manual have the following meanings.

Indicates the relevant operational precautions that must be

followed.

Indicates operation-related suggestions from OMRON.

Punctuation Marks

In this manual, Menu, among others, is defined as follows.

[ ] Menu indicates the name of menu or Processing item shown in the menu bar.

" " Item name indicates the item name displayed in the screen.

User's Manual

This manual describes the basic operations and all settings when using vision sensors.

This Manual includes two parts: Operation and Environment Settingas Parts. The

contents are shown as follows.

Operation Part

This part describes how to measure according to the workflow chapter by chapter.

First, prepare to measure by performing "Preparation"g"Design Contents to be

Measurement"g"Set up Contents to be Measurement".

Then, confirm whether or not to measure exactly against the expected objectives by

performing "Measurement Test"g"Adjusting Measurement Contents" repeatly.

Finally, perform "Actual Measurement"g"Verify Measurement Results".

In addition, this part also describes the operations of controller and how to utilize and

analyze the measurement results.

Environment Setting Part

This part describes the measurement environment (camera and lighting, etc.) and the

required system setting and configuration to facilitate the measurement.

In addition, this part also describes the required setting for outputting the measurement

results to external devices and how to store data.

For the Q&A and how to treat the encountered faults, see Appendix. Please read as

required.

User's Manual

Operation Part

This part describes the operation flow from planning to actual measurement and result

verification.

Before Operation

Design

Preparation

Setting up Scene (Measurement Flow)

Test Measurement/Re-measurement/Adjustment

Starting Operation

Utilizing/Analyzing Measured Data

Chapter 1 - Before Operation

This chapter describes fundamental operations and designations of components of this

product.

Operation Flow

Screens/Windows

Input Operation

Inputting a Value

Inputting a Text

Selecting Files and Folders

Operations of ProcItem Setting Window

Setting Figures

Saving Settings and Powering Off

Operation Flow

Here describes the operation flow.

Screens/Windows

The screen varies with the operating state. Some typical interface structures and various

buttons are functionally described hereto.

Main Screen (ADJUST window)

The screen is used for carrying out measurement, from which measurement results can be

verified.

1. Menu bar

To select the menu used for measurement-related operation or setting.

Main Screen Menu

2. "Measurement information display" area

1. Overall judgement

Displays the result of the overall judgement of a scene ([OK]/[NG]).

The judgement result for each processing item is displayed in each flow

unit of the "Control" area.

2. Process time

Displays the time required for the measurement process.

3. Status display

Displays the scene group number, the scene number, the external output

status, and the image mode for the currently displayed content.

3. Toolbar

Some common functions are reserved in Toolbar.

oEdit flow

Displays the Edit Flow window. In the displayed window, you can add,

delete, or edit processing units.

What is Scene

Edit Flow Window

oData save

Setting data is saved into flash memory in the controller. Scene group data

can also be saved to USB memory. Modified settings must be saved.

Saving Setting Data in the Controller's Memory [Data save]

oScene switch

To switch a scene group or a scene.

Changing Steps (Scene Switch)

oMeasure/Stop meas.

Starts/stops measurement. The measurement is performed in accordance

with [Test measurement] settings in the "Control" area.

Test Measurement before Actual Operation

oSwitch to RUN mode

Switches the display to the RUN window.

Edit Flow Window

4. "Image display" area

Displays the measured image.

1. ProcItem setting button

Displays the name of the processing item for the currently selected

processing unit. When tapping the button, the ProcItem Setting window is

displayed.

5. "Control" area

Displays "Test measurement setting", "Flow", "Detail result", and "Image view

setting". You can expand or collapse each item by tapping its panel.

oTest measurement setting

Sets up test measurement or re-measurement using a previously input

image.

Test Measurement before Actual Operation

oFlow

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de Omron

Omron

Omron Z4W-V Manual de usuario

Omron

Omron F3ET2 Series Manual de usuario

Omron

Omron Z550 Guía del usuario

Omron

Omron F3C-AL Manual de usuario

Omron

Omron E3FZ-B Manual de usuario

Omron

Omron E3F Manual de usuario

Omron

Omron ZG - Manual de usuario

Omron

Omron E2K-L Manual de usuario

Omron

Omron SYSMAC FH Series Guía del usuario

Omron

Omron E3G-L1 Manual de usuario

Omron

Omron F150-3 - Guía del usuario

Omron

Omron LASER ZX - Manual de usuario

Omron

Omron MX2 DEVICENET OPTION BOARD Manual de usuario

Omron

Omron E2A3 - Manual de usuario

Omron

Omron Z510 Manual de usuario

Omron

Omron E2E - 2 Manual de usuario

Omron

Omron Z4M-W10 Manual de usuario

Omron

Omron E2EL Manual de usuario

Omron

Omron K7L-UP-FLK Manual de usuario

Omron

Omron F3C-AA42 Manual de usuario

Omron

Omron F3EM2-005 Series Manual de usuario

Omron

Omron E2E-Y - Manual de usuario

Omron

Omron EQUO Series Guía del usuario

Omron

Omron ZS Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario